There’s really nothing like a solid wood floor.
It’s a classic feature for your home and one that lasts the test of time.
Sure, there are plenty of experienced people offering carpentry services in London, but have you ever considered laying the wood flooring at your home yourself? It’s entirely possible.
Here’s a guide to give you an idea of the steps involved in laying wood flooring at home. Turn to carpentry services in London if you need any expert assistance. To add, if you’d like to know how much it costs to clean floors, visit our updated floor cleaning cost guide.
A good place to start (and maybe the most fun step). Pick the type of wood flooring you want. Most of the popular options are fairly low maintenance, such as oak, pine, cherry and walnut.
Pick your favourite hue and you’re all set to get started.
The base (AKA sub-floor) is the layer of flooring which will lie underneath your brand spanking new wood floor. You need a solid base so your flooring can get the support it needs to endure the inevitable stress of daily use.
Check that your sub-floor isn’t worn or uneven in any areas. It needs to be even, dry and smooth. If it does have any faults, get them replaced or fixed before you continue layering your wooden flooring on top.
Remember, a faulty base leads to problems in the future.
This includes removing the trim or base moulding around the room’s perimeter. Use a putty knife to pry these away without causing any damage to the trim.
A hugely important step of the process that will require a bit of patience. At least 7 days, to be exact.
As moisture in the air can cause your wooden flooring to expand, you need to expose your floor boards to the new room’s atmosphere for a week so they can acclimatise properly before securing. It takes this time to adjust to the change in temperature.
Your floor manufacturer will have specific instructions on whether the flooring should be left to acclimatise in the packaging or not. Some may need less time, so opt for those if you need your floor done in a jiffy.
‘Dry lay’ your flooring to find the best positions for your floorboards before nailing them down.
It’s easy – lay the first few boards in your ideal locations and check that the placement works.
Now that you have your placements sorted, you’re ready to lay your first board (finally).
Lay your boards on top of a vapour barrier sheet to keep noise levels in your home down.
Keep your first board about a centimetre away from your wall to allow for any slight expansion.
You can blind nail or face nail your floorboards to secure them to the ground. Blind nailing involves driving a nail into the board’s tongue at an angle using a flooring nailer. The nailer is a godsend for you (and your neighbours) as it saves you hammering away.
Face nailing is also straightforward. It involves driving a nail into a pre-drilled hole. You can use a power nailer for this too.
Nail away until all the floorboards are secure.
Step back and enjoy the vision of your newly laid wood floor.
Yep, you did that.
Not to doubt your abilities or anything, but there are some instances where only professional carpentry services will do. Call a carpenter if:
This post was last modified on
Airtasker secures $26.2M in media partnerships
A new year is coming, and there’s no better time to refresh your home.
Recent legislative changes require Airtasker to report to HMRC on earnings made through the platform.
Transform your outdoor space with these modern landscaping ideas, which blend softscaping and hardscaping elements.