Find an experienced handyman in Dublin

Wiring already in place wall where extractor goes is outside wall

The actual cracked stair tread Video is here: https://youtu.be/eAcVQsfgVEk Scope of Work Repairing (or replace) Broken Timber Stair Tread: Assess Damage: The tread is split approx two or three inches from the front edge. The split runs along the middle of the tread. (depending on handyman your advice) Remove the Damaged Tread maybe by unscrewing or prying it from the stringers. Ensure not to damage surrounding components like risers and stringers. If Replacement: Measure the dims of the old tread to obtain an accurate size for a new tread. Acquire Materials: A new tread board, preferably made of the same material as original. Wood glue (if the current tread can be mended and reinforced rather than replaced). Wood or steel screws dowels and/or nails or other woodworking things. Sandpaper (medium to fine grit) to smooth out any rough edges or prepare the replacement tread for finish. Matching stain/finish (if necessary). Tools Needed: Drill and driver for screws. Circular saw or handsaw to cut a new tread (if needed). Clamps (for mending existing tread with glue and screws, if this is viable). Hammer. Level to ensure tread placement is even. Repair or Replace: For Repair: (this is your work choice I only suggest) Apply wood glue to the split, clamp the tread to hold it in place, and let it set per glue’s instructions. Reinforce by driving screws diagonally thru the tread into the split, securing the fix. For Replacement: Cut a new tread to size. Position and screw the replacement tread securely onto the stringers. Sand and apply finish to match the surrounding steps. Final Touches: Ensure all screws/nails etc are flush to prevent tripping hazards or issues. Verify that the stair tread is strong secure and even, fit for purpose. Clean up and inspect the overall stability of the repaired or replaced stair. Test fit for purpose with another, perhaps me.

I have about 8 pictures to be hung. All stud walls. Some are large and heavy.

I have some sockets that need replacing.

Hi, I need a mirror door for closet, mirror door for wardrobe and glass door for cabinet. Doors for vanity unit as well. Measurements below. Living room cabinet 124cms L 60cms W Mirror closet cabinet 125cms L 80cms W Wardrobe door 228cms L 60cms W

My bags zipper is broken big 23 kg trolley bag. Wants to replace it.

Garden shed needs maintenance. Some wood panels need replacing. Then paint with suitable paint/protector.

Just hang a mirror in hall way

A short brick wall was hit with a car and it came down

Really quick job to install a glass shower screen at the side of a bath

Fix floating shelf on the wall

Kitchen sink supply and fit

In a large bay window of a Victorian House, the metal chain of the centre blind, the largest, has snapped so that blind cannot be moved up or down.

Need to fix 2 joints that hold the bed together.

Seat mesh needs replacement, either by similar mesh or another (more resistant) type of material

Need someone to cut out counter top to install a hob.

fix a deep car scratch (NISSAN NOTE).If it is possible to fix only the door

The front glass of boton door been completely destroyed.

Hang the shelf on the concrete wall, in the middle of the wall is the socket.

The external soil pipe on the back of the house has become loose from the wall, and the pipe has slightly turned with the force of the wind. Would like a new bracket attached to the wall to secure the pipe in place.