Find professional window and door services in Brisbane

Shower screen has come off wall. Needs to be reattached

Quote for door replacements and repairing damaged roof and walls

Need to install a door as per the attached photo. I have attached a markout plan of the measurements. The surrounds walls are from brick

Transform a multi purpose room into a bedroom. Currently, the multi purpose room has a 2-piece sliding doors and no window. Scope of work: 1. Remove one of the pieces of the 2-piece sliding door (marked in yellow). 2. Install a fixed glass window in place of the removed door (available space is ~770 mm). 3. Install a lock on the other remaining sliding door. 4. Install a curtain rod and bracket over the new glass window. (Approx. 770 mm) Please come to inspect and provide a quote.

Looking to install glass wall partitions with door Partitions wall measurements approximately 15ft length and 9ft wide

As per picture, looking to have the garage door serviced.

I have two heavy sliding doors, just needing to be reset on their hinges.

We are after some quotes for single garage door. Price for both section or traditional roller. Approximate dimensions of garage door: Height: 2060 mm Width: 2800 mm

Glass sliding door for built in wardrobe has come off track needs to be put back in. Must have experience.

In urgent need of a handyman that can open an interior bedroom door that cannot be opened due to door knobs falling off on both sides. Located in Bulimba. Hoping for someone that can come this evening to assist in opening the door and putting the door handles back on so they are operational on both sides.

Remove 2 internal doors and rehang one of those doors internally and another exterior door. First 2 pictures are the doors to be removed. One of those doors to be rehung on a new doorway which is being built this week. Final picture is of door to be taken off with a new exterior door to be hung. Installation of locks on new front door and door to be hung on new internal doorway. New door and locks provided.

I need a few centimetres shaved off a bedroom door due to installation of new carpet. I live in an apartment building so will need mobile tools to remove door, shave and then reinstall.

1. Got holes on both front and back of the door, hinge is broken also. Need to replace the whole door. 2. The door frame of balcony is bend, need to repair.

need all doors repalced and handles attached also cupboard under sink repaced and drawers put in small pantry

I am looking for a handyman who can fix two door handles that no longer close properly.

Remove two metal hoods and install two new metal window hoods from Woodworkers. It's a one piece of metal hood that includes the flashing which needs to be placed under weatherboard walls and then screwed in with the right accessories to ensure longevity. Size: 95cm width Please note that you'll need your bring any necessary tools and joining accessories (screws and etc) as the hoods are being delivered without any accessories. - Please only quote if you have %100 confidence. - Access is easy, ground level. Woodworks generic explanation for install- Colorbond hoods can only be connected by pop rivet joints Metal hoods should clear the external jambs of joinery by approximately 30mm and are usually simply screwed directly to the chamferboards with dome head screws & nylon washers to ensure electrolytic compatibility with the hood metal. Remember water cannot flow over zincalume onto galvanised fixings. Because metal hoods are so light they can easily be installed by two people in a fully assembled state. The metal hood needs to be positioned to avoid interference with the window opening (especially with casements) and ensure pedestrian traffic cannot collide with the hood. Ensuring the hood and window are parallel, the top flange of the hood is usually slipped under the chamferboard or weatherboard overlap and the sides are screwed down with to 4 screws each side. 100) AA •

Wall repairs to back shop in Brisbane City

One hinge is broken on the oven door. A replacement hinge is ordered. The task is to attach the hinge to the oven door so the oven door opens and closes correctly.

Looking for someone who can fix our door handle The handle is working but the screw fittings are now too loose and need to be re drilled.

I’m installing a remote controlled blind and I need to cut a piece of a window door frame in order to ensure the blind will work. The blind will Be remote controlled and installed by kresta - the blind will come down from the inside of the door frame and so the big solid metal piece needs to be cut at an angle so that when the blind comes down it will slide down over the newly cut door frame piece - I hope that makes sense - you may need to see it first hand