Find experienced deck builders near you

Hi everyone, i need to build a deck with Ekodeck. The measurements are around 1.9 mt x 5.2 mt and 200 cm high and need to be flat with the front and we can leave a step on the back. Easy access and you got to tell me how much would be the materials.

I need to get my wooden deck restore which is 5*1.5 meters.

-Repair/replace window and door frames -Repair/replace part of the deck - wall renderings -door handle replacements - sit seal and paint skirting - painting of walls

Looking for a qualified installer to put in double skinned flue for a small wood fire pizza oven. The roof of the house is colourbond.

Need to paint the deck - 15.5 ft by 18 ft

remove small existing deck and build a new larger one with stairs

Replace old decking slats x10 . Re oil and repaint

We want to build at least 3-4 steps at the front of our property using Ecodeck material from Bunnings. The design is similar to a floating look from concrete steps.

Hi , I am looking for pergola ( 6*4) insulated one with Dow lights and fan. Also eco decking 40 squares with lights at the end of the decking . ( need fire pit in the decking ) Please refer my backyard diagram and also the design I am looking

Sand deck /pizza oven and ultra deck natural 2 coats 66 m2 deck and pizza oven

We are only somewhat flexible, need the job done between Friday 24 and Monday 27 May. This is a make-good job for an industrial space. To be demolished is a timber deck plywood and pine frame. Steel frame wall, lined with plywood one side, with  pine ceiling joists/ gyprock sheet. Lights and wiring will be removed prior to demolition. Includes removing the debris

I will need these two lights installed in our outdoor deck area. There is no existing wiring and needs to be sourced from inside the house. I will need a switch as well to compliment the lights. The current photo is the solar light panel which has not electrical wiring.

Timber deck needs fixing. 2 slats have been damaged as per the 1st picture (taken through a window), likely occuring when our dogs have walked over these weak spots. There is another weak spot nearby on a different slat that we've found that has yet to develop a hole, but is soft under foot. In the 2nd pic, 1 slat has become dislodged, guessing because the screws have become loose or broken. Many thanks

I’m in need of some help to sand a deck back to raw timber. I don’t need any oils or deck wash applied I just need the deck sanded. I’ve already started but I don’t physically have the time to complete the work. The deck size is ~9m x 5m

We have fly screens which are torn and mouldy. Have tried patching but patches aren’t working. Would like a quote to repair flyscreens on deck. Youd need to measure up and I’ll pay material costs ontop of labor. Must have experience repairing fly screens. Wants it to look neat and tight and professional. Would also consider a sturdier “gauze” material. Also have about 8 windows in the house with fly screens need fixing.

Labourer/s required. Removal of small deck. Rubbish vouchers can be supplied. Post holes dug for new retaining required. New posts holes (x4, approximately 50cm deep). The soil in the yard to date has been a combination of shale, sand and clay type soil.

Looking to get decking re freshed - clean, sand, nails in tact and re painted.

I have a deck that's 4.72m wide x 9.6m long located in Ormeau Hills Sanded back and restained - putting house on market soon so need it to look presentable but we are time poor due to full time work

I have a deck on top of my garage that sits about 70cm above the ground and I wants steps installed.

Wanting to have our 2x10m timber deck sanded please ready to oil. If you do oiling 2 coats also that’s a bonus