A close-up image of a carpenter sanding a plank of wood representing carpenters near me.
A close-up image of a carpenter sanding a plank of wood representing carpenters near me.

Find experienced local carpenters near you

Fill a short form and get free quotes from local carpenters in minutes

4.3

Excellent rating - 4.3/5 (10900+ reviews)

Hire carpenters near you today

  • Cabinet making
  • Custom shelving
  • Wood repair
  • Custom made furniture
  • Deck sanding
  • … or anything else
It only takes 2 minutes. And it’s free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated carpenters near me

Recent Carpentry reviews

Efficient and experienced! Figured out the best way to do a tricky job. Highly recommend!

Carpenter to remove a cupboard shelf and reseal exposed chipboard

$200

Simon takes his work seriously and goes above and beyond to make sure his clients are satisfied. I’ll definitely be hiring him again. Thanks, Simon!

Hang/Align Cabinet Doors

$120

Roland is super helpful and went out of his way to make sure that I was happy with his work. His wealth of knowledge and experience is very evident - highly recommended.

I have three small carpentry type jobs

$250

Fantastic work today! Thanks David

Carpenter/Handyman Needed

$400

Efficient and punctual.

Wooden laundry bench cut for top loader

$200

Great job and good communication.

Secure fence palings with stainless steel screws

$150

What's the average cost of a carpenter

$100 - $500

low

$100

median

$250

high

$500

Low, median and high bar chart distribuiton

Average reviews for Carpentry Services

based on 938 reviews

4.94

906
15
11
1
5

Best rated joiners near me

Recent Joiner reviews

Tim did an excellent job of fitting our dog door. Very professional and great job! We will not hesitate in using Tim again, 5 star.

Dog Door installing into Timber door by a Joiner

$120

Got most things done but did not get into doors

Carpentry / joinery

$500

Great guy. Good Job Highly recommend

Joinery/Carpentry Skill

$500

Oh great worker fantastic job has been done much appreciated but please follow up some defects if there’s any

Joinery defect work

$400

Great Job, highly recommend to anyone. A +

Joiner to fix sliding cupboard door

$150

Job well done

Assemble ikea joinery

$400

What's the average cost of a joiner

$124 - $535

low

$124

median

$275

high

$535

Low, median and high bar chart distribuiton

Average reviews for Joiner Services

based on 230 reviews

4.95

224
3
1
1
1

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

5,000+

Tasks successfully completed

2

Average amount of offers per task

54

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker over the last 7 months.

Why book a local carpenter through Airtasker?

Carpentry plays a massive part in building and construction. From the chairs we sit on to the homes we live in, so much of what we interact with has gone through the hands of a carpenter at one point.

Carpenters can help with different types of construction work and projects of all sizes. If you’re building an extension or adding a carport to your home, an experienced carpenter can create a frame that’s built to last and meets all council regulations.

On the other hand, if you’re looking at the finer details of your home, a carpenter can be of great assistance too. From small detailing like replacing skirting boards or wall frames to refurbishing your dining table and chairs, hiring a skilled labourer can make all the difference.

With Airtasker, you can quickly and easily find the best carpenter in your area for your job. Simply tell us what you’re looking for, where you’re based, and what your budget is, and we’ll connect you with the people with the most relevant carpentry skills in your area. You can then browse profiles, read reviews and get in touch with your favourite carpenter near your location to get your project underway!

Find insured carpenters

All work on Airtasker is insured – whether it’s your roof, your walls or on the ground – so you can rest easy.

Quick offers

If you want to get started straight away, Airtasker’s system provides just that. With us, you’ll find offers coming in thick and fast – perfect for those emergency repairs.

Set your budget

Because you choose the budget, you can spend exactly what you want. There’s no room for hidden charges or surprise fees on our system.

Get the best local carpenters in your area

You’ll be able to see how well local carpenters have worked on other jobs because of Airtasker’s easy-to-read rating system

Top Carpentry related questions

To estimate carpentry work, start by assessing the scope of the project, including the materials, labor, and time required. Measure the dimensions of the area to be worked on and calculate the amount of material (like wood, nails, screws, etc.) needed. Then, estimate the labor cost based on the hourly rate of carpenters in your area, factoring in the time it will take to complete the job. Add a buffer for unexpected expenses or changes, and include any overhead or profit margin if you're offering a formal estimate.

Carpenters or chippies work with wood in all manner of ways.A builder carpenter near me do timber framing for a house or carport to the finishing touches on furniture, carpenters are hired for jobs large and small.

Not all carpenters offer the same services. An experienced cabinet maker may not be the best choice if you want timber framing done, while a decking expert may not have the credentials to refurbish your furniture. It's advisable to choose a Tasker who has adequate work experience in the specific job of your request.

Yes. While some carpenters have specific areas of expertise, you can employ someone to do a number of small woodworking jobs in one visit. This can be the same job in a number of rooms or different jobs throughout the house. Remember though that some carpentry jobs require more than one day to complete.

From specific tasks such as cabinet maker to more general terms like artisan, joiner, or woodworker, there are plenty of variations for carpentry workers. Depending on their specialty and level of training, you may find that a carpenter comes under a different name. A carpenter with advanced skills, experience, and the proper tools can be referred to as a master carpenter. Someone working on assembling moulds and concrete structures for large-scale construction is called a formwork carpenter. 

In Australia, certified carpenters will have normally completed a Certificate III in Carpentry and Joinery (or higher certification), or a similar course through TAFE, and an apprenticeship. You may find that older carpenters learned their skills through a traineeship. Carpenters working on construction sites must also have a Construction Induction Card (white card).

For certain types of carpentry tasks, you may need to enquire as to what specialist licenses may be required to undertake your task as this can vary. Please make sure that you confirm that a Tasker has the relevant licence and insurance before accepting an offer.

A carpenter primarily focuses on working with wood to construct or repair structures such as furniture, framing, doors, and cabinets. They typically specialize in tasks that require woodworking skills, like installing trim or building custom pieces. A builder, on the other hand, oversees and manages the overall construction of buildings or structures, coordinating different trades (including carpentry, plumbing, and electrical) to ensure a project is completed on time and within budget.

Carpenters need to be careful of several safety risks, such as sharp tools, heavy machinery, and working with materials that can splinter or cause injury. They should also be mindful of their posture and body mechanics to avoid repetitive strain or injury, especially when lifting or carrying heavy materials. Additionally, carpenters should follow proper safety protocols when working in environments with dust, fumes, or potential hazards like electrical wiring to minimize health risks and ensure safe work conditions.

Top Joiner related questions

Joinery sets itself apart from carpentry in the way it’s done and in the scale it’s in. While both work on wood installations, carpentry is usually done on-site on a smaller scale and usually on fixtures already. In comparison, joinery is done at a larger scale in a dedicated workshop, typically building bigger home installations like stairs, doors, and door and window frames.

No, especially since joinery is the type of work that is usually done in a workshop rather than on-site. Planers, circular saws, and other machinery are involved in crafting some of these larger-scale installations for your home. Suppose that some joinery can indeed be done on-site. Taskers are experts who are expected to come to work prepared not just with the skills but also the tools needed to get the job done.

This would depend on how much joinery is needed to be made, be it for repairs and minor renovations or a construction project built from the ground up. Regardless, expect a bit of time for local joiners near you to finish your joinery in their workshops and deliver them to your home or site. It is best to discuss timelines with your Taskers to manage expectations.

Typically, yes. However, how long a Tasker will guarantee the work would vary from case to case. For all we know, a Tasker may be confident about the work and give an extended warranty. Regardless, Taskers will work on the projects to the best of their ability to ensure that the finished product would last long. For specific warranty questions, it would be best to discuss this with your Tasker.

Yes, you can, but it comes with certain risks. For one, you would likely be unable to come up with something of similar or better quality than someone who is more qualified and has years of experience to deal with these kinds of jobs. This is where Airtasker comes in by connecting you to different Taskers who can do it for you with high quality and less effort, at a reasonable cost.

There is no correct answer for this as this would depend on the complexity of the work and the amount of joinery that needs to be made, among other things. You can gauge your estimated costs on the Taskers’ initial quotations when you put up a task. However, these costs may be subject to negotiation and change depending on how the project goes.

What do carpenters near me do?

Whether you’re planning a major renovation on your home or you simply want to make things look a bit nicer, hiring carpenters near me for small jobs or chippy can help you with many different tasks. Carpenters use other types of power tools and hand tools to carry on building and construction work. 

Carpentry work is generally broken down into two types: rough and finish. Rough carpentry refers to work that doesn’t have an intricate look, as it’s covered up – often by bricks, tiles, or plaster work. Finish carpentry covers the work that will be on display, so needs to have a nicer finish. Furniture, decking, and window frames all fall into this second category. 

Carpenters for decking

Many Australian homes are blessed with a large backyard and plenty of sunny hours to enjoy that space. A decking specialist can add an outdoor deck or upgrade an existing one that opens up your outdoor space. This is great if you want to entertain guests or eat outside as a family during the sunny months. 

Carpenters for cabinet-making

Cabinet makers are one example of finish carpentry, because of the high level of detail that goes into their end products. Unlike structural work, it’s important that a cabinet looks nice, so this type of carpenter is a lot more focused on fine details. Cabinet makers often specialise in other forms of furniture making too. 

Refinishing carpentry

While structural carpentry is concerned with jobs on the large end of the scale, trim or refinishing carpentry looks at jobs like wood staining and removal of old finish. A trim carpenter is the way to go if you want someone to fix up your skirting boards, cornicing, or a similar aspect of your home.

Custom made furniture

A house isn’t a home without a few personal touches, and if you’d rather avoid the cookie-cutter Ikea approach to decorating your property, hiring a carpenter to create custom-made furniture can make you stand out. Whether you want chairs, tables, or a shoe rack, or even kitchen installation there’s someone nearby who can help. 

Joinery carpenters

Joinery services encompass the craftsmanship of creating and joining wood in workshops, distinct from on-site carpentry. These services range from bespoke projects to crafting timber buildings, emphasizing precision and passion. Joiners play a crucial role in interior woodwork, window and door production, and specialized construction, offering tailored and quality timber solutions.

Recent Carpentry tasks

Sanding, painting, staining deck and pergola, front door, facade

$1,000

Netley SA, Australia

28th May 2025

8x4 timber frame pergola needs coat of paint to freshen up. Half of facade needs coat of paint. 8x4 deck needs sand and stain. Front door needs sand and stain.

Cabinet maker

$2,000

Clyde North VIC 3978, Australia

28th May 2025

Some cabinets in laundry and lay

Drawer cabinet secured to wall

$60

Craigieburn VIC 3064, Australia

28th May 2025

Need an IKEA drawer cabinet secured to the wall. Materials provided (screw and latches).

Cabinet Maker Needed

$500

Highton VIC 3216, Australia

28th May 2025

I have moved into an older house. My fridge is about 2cm too tall for its cabinet and the top shelf needs to be moved upward. The Microwave is also about 1cm too large for its slot and its shelf needs to be moved downward. I also have a butler's pantry where a pantry cabinet needs to be pulled out to accomodate a tall standing freezer. The photos show the previous occupant's furniture - fitting correctly. The pantry only shows a sliver of the tall wide cabinet to be removed on the right - I will upload proper photos after work.

Modify kitchen cabinets for dishwasher

$450

Woodville Park, South Australia

28th May 2025

Cabinet maker required. Wanting to install a dishwasher next to kitchen sink where currently there is a second set of 4 tier drawers and a corner cupboard. Knock out the 4 tier drawers and a portion of the corner cupboard, blank off the space so the corner cupboard can be re-purposed for a slide out bin. New door and hinges would be required to open the from the front. Dishwasher is standard freestanding size. And is available right next to the installation area for accurate sizing/measurement. Drill hole for drain hose to reach the sink also required. Permanent Dishwasher install not required as part of the job, however, would prefer to trial fit post cabinet mods.

Cabinetry modification for dishwasher

$100

Altona Meadows VIC 3028, Australia

28th May 2025

Need kitchen cupboards modified to create a dishwasher spot.

Tighten hinges on all the cabinets in salon

$100

Fortitude Valley QLD, Australia

28th May 2025

Tighten cabinet hinges in salon

Custom kitchen cabinets

$1,300

Wonga Park VIC, Australia

28th May 2025

Provide custom kitchen cabinets for small kitchen in shed. No appliances. See drawing Cabinet colour dark grey similar to Colourbond Monument, NO benchtop, No handles internal carcass standard white

Need carpenter with circular saw

$150

Kealba VIC, Australia

26th May 2025

We need a carpenter with circular saw to measure and cut PS and PVC panels.

Good job. Highly recommend. He did beyond the task. Thanks a lot

Fix Wooden Fence and Gate

$150

Lilydale VIC 3140, Australia

26th May 2025

Need a fence fixed, gate fixed and gate stopper reattached. All as per photos. Need to supply and cut wood. Nil painting required.

Cannot recommend enough. Great job. Very efficient and easy to communicate with. Fair pricing for the quality of work. Will use again.

Stain Removal in Bedroom Carpet

$150

Stanhope Gardens NSW, Australia

25th May 2025

Remove 2 x Stains in Bedroom Carpets 1 x Ice Tea stain 1 x Fabric Sofner stain

Daniel is super good in his job. He was doing extra work as well. We are very pleased with Daniel's work delivered.

Carpentry labour

$40

North Kellyville NSW, Australia

23rd May 2025

Need an able bodied person to carry materials and tools up/down 1 story for a few hours this afternoon (asap)

Fully recommend Neil to future clientel

Seeking carpenter - repair 2 sections in roof attic

$150

Braybrook VIC 3019, Australia

22nd May 2025

These 2 sections have minor termite damage - disinfected. To place wood piece laminate over affected areas. Picture attached

I highly recommend - showed up on a short notice, did quality work and all in a competitive price. He's the guy.

Deck Sand & Re-Stain

$1,000

Cornubia QLD, Australia

22nd May 2025

Looking for someone with experience sanding/staining floors to sand and re-stain a deck (4.2 x 5.6m). Easy access via side gate (no stairs). Located Cornubia

Professional and great attention to detail. Would recommend

Floor sand, stain and polish 12 sqm

$500

Windsor VIC, Australia

20th May 2025

Sand, stain and polish wooden kitchen floor to match living room floor. Currently it is a bit darker, and has some light areas due to kitchen remodel. No nails and fairly good condition floor. Quote should include all labour, materials and equipment.

Quality workmanship and dedication to doing the job right. Thanks team :)

Replace a single piece of hardwood flooring

$5

Templestowe Lower, Victoria

19th May 2025

Need a single piece of hardwood flooring replaced (1740mm x 110mm) as it has become rotten over time. It is the piece next to the wall underneath where the kitchen cabinet was previously. I think my current flooring is tassie oak but anything similar (you provide) is fine as it will not be visible since a new kitchen carcass will sit on top of it.

Replaced the flooring quickly and did a good job.

Basic carpentry, cut/lay quad and trim cupboard doors

$600

Northcote VIC, Australia

19th May 2025

Hi, need some basic carpentry help in Northcote please. 1. Lay quad/quarter round in a 3.7 x 3.7m room on 3 sides as per image. The quad is already painted, it will need to be measured (noting a slight drop on the floor), cut at 45 degrees as needed and nailed down between trim and carpet, also adding 45 degree end caps at door opening etc where marked in blue on the room plan. 2. There are 8 wardrobe cuboard doors in the 2 front rooms and 6 of them drag on the new carpet when opening, so they need to be removed from their quick release hinges, planed/sanded/cut a few mms off the bottom without splintering or ruining the paint on the front, then re hanged. It's a little fiddly lining up the 3 hinges to get them hanged again. 3. Quick one, another room has 4 raised wardrobes and just want to install some angle L brackets up the top to fix them against the wall for safety. I have bought the brackets and have a ladder to get up there. Will need your own table saw, nail gun, drill. etc. I have a big back garage to work in (as per pic) but the house has been cleaned for tenants and needs to stay that way please. House is currently empty and there's a lock box for easy access. Thanks!

Great work, super quick, thanks!

Stainless steel magnetic pool gate not locking

$100

Randwick NSW, Australia

18th May 2025

My stainless steel magnetic pool gate lock isn’t working

Omar was diligent with my pool gate lock he spent hours on it then came back another day with new parts needed to complete the task. Highly recommend him

Small carpentry job

$200

Flemington VIC 3031, Australia

17th May 2025

Need kitchen cabinet bottom panel removed and raised, and doors shortened. This is so that my fridge will fit

Amazing work, in time and exactly what I want!

Stain/oil deck

$250

Eltham North VIC, Australia

16th May 2025

I have a small square corner of my deck I need staining with oil, I have the oil already.

Amazing job on our deck, thank you!!

Recent Joiner tasks

Joinery Installer

$500

Port Lincoln SA, Australia

27th May 2025

Our company is working on a project in Port Lincoln and we’re looking for local professional installers to assist with the installation. 📍 Location: Port Lincoln, SA 🛠️ Scope: Joinery Installation 📅 Start: approx 25th of June 💼 ABN & own tools required ✅ White Card essential. If you’re skilled, reliable, and available to help – get in touch!

Someone with Adhesive wallpaper skills to fill joinery recess

$150

Paddington NSW, Australia

26th May 2025

Looking for someone with adhesive wallpaper skills to wallpaper a recess on one bedroom wall.

Joiner. Carpenter. Eaves. Doors.

$5

Rooty Hill NSW, Australia

26th May 2025

Need a joiner/carpenter for ongoing work. Duplexes, grannys, new homes, renos.

Small Joinery Job

$500

Byawatha VIC, Australia

25th May 2025

I need a joinery to cut out 10 door and 6 end panels and apply pre glued edge strip for my bathroom and laundry renovation. I also need the sockets for the hinges routed into the doors. The cupboards are already constructed. I have coloured laminate board, pre glued edge strip, and hinges.

Joiner / chippy to build a custom bench seat

$300

Rose Bay NSW, Australia

23rd May 2025

Looking to find a chippy or a joiner to build a custom bench seat with drawers and a console chest of drawers. Similar to what’s pictured. Both from the same matching material

Joinery/handyman work for new laser room

$5

Greystanes, New South Wales

23rd May 2025

Joinery work for new cupboards and shelving for laser room and potentially more work in the back pergola room area. I will be removing all the garage shelving. Photos attached of workspace and photos of similar layout I am looking for

Hiring for full time joinery for kitchen and bedroom

$250

Kingsgrove NSW, Australia

23rd May 2025

Seeking for talented and skilled joinery who can assembly and installation for kitchens,bedroom and bathroom .if you looking for the full time job pls pm me thanks ..per day 250

Carpenter/joiner to help me build a benchtop

$800

Neutral Bay NSW, Australia

18th May 2025

Need a Carpenter to help me build a benchtop, woodcutting and screwing

Drill hole in joinery unit for cable

$100

Phillip ACT, Australia

14th May 2025

I need an approx 3-5cm hole drilled in the side of a cabinet for a cable, then a cable grommet fitted (which I will supply)

Good communication prior, got the job done

Carpenter joiner to supply and install temp door to renovation toilet

$280

Ramsgate NSW, Australia

2nd May 2025

Supply and install 770 door to existing frame with hinges and basic lock to be provided. This is just a temporary toilet for trades Also need quote for entire renovation work All need doors to 6 bedroom house Replace decking to a balcony with balustrades replacement repair New balustrades to downstairs balcony area Some Skirting and architraves to new rooms

Excellent to deal with and highly recommended

Joinery Repairs

$375

Ryde, New South Wales

25th Apr 2025

I need some joinery repairs done as follows: 1) Joinery panel 2.1m X 0.6m came off the ceiling, needs to be re-glued securely as it's a heavy panel. 2) Joinery door of cupboards below BBQ on terrace came off due to loose/corroding hinge &/or screw holes 3) Vertical battons glued on to joinery panel at entry have come loose, needs to be re-glued with clear glue. I have attached photos of each of the three areas. I would prefer someone with experience in cabinet making or joinery. Thanks

Great communication and job done efficiently

Joiner or handyman needed w tools

$100

Sans Souci NSW, Australia

17th Apr 2025

Cut out back panel to gain access to a tap in base unit

Great job Mark !!! Very happy !

Cabinet maker or joiner needed please

$400

Paddington NSW, Australia

15th Mar 2025

Measure current cabinets and replace with new ones in black

Highly recommended and extremely professional!

1x Cupboard/Joinery lock changed - two keys required

$100

Melbourne CBD VIC 3004, Australia

4th Mar 2025

I have one cupboard in our office on which I need the old lock removed and a new one installed. I need two keys with the lock.

Mohammad was excellent. Good communication, punctual and efficient. Highly recommend.

Handyperson to install new joinery and hinges

$150

Braddon ACT 2612, Australia

4th Feb 2025

I’m seeking a handyperson to install hinges and handles on two doors. Issue is that hinges are slightly too thick, so the frame needs to be carved out slightly. Also require five handles installed on five kitchen cabinet cupboard doors only. Hinges and handles have already been purchased. Just need someone to install please.

Lee has very good attention to detail

Experienced Joiner Needed to Repair Wooden Stick Base of Queen Bed

$100

Punchbowl, New South Wales

23rd Jan 2025

Seeking a skilled joiner or carpenter to repair and secure the wooden stick base of a queen bed. The job requires ensuring the base is sturdy, aligned, and durable. You will need to bring your own tools for the task. Kindly provide your quote and availability. Thank you!

⭐️⭐️⭐️⭐️⭐️ MAURI did an excellent job fixing my bed! HE is a professional, and efficient. The bed is now sturdy and good as new. Highly recommend his services!

Plumber to hook up copper and joiner to gas meter

$200

Glen Iris VIC, Australia

8th Jan 2025

I have just had my gas meter moved location. I am need of a plumber urgently to install roughly 1m of copper and joiner to hook up to the relocated meter. Needing done ASAP as my hot water is currently off. See pictures for reference.

Incredible communication and work ethic. Couldn’t be more reliable, thanks mate!

Painting - inside skirting and kitchen joinery (Labour only)

$300

Malvern East VIC, Australia

23rd Dec 2024

SCOPE: Labour only. 1. Painting: Trims + skirting + kitchen bench/cupboards (outside only). refer to photos. 2. Protection: drop sheets etc must be protected to avoid paint / markings. 3. Access: Easy access, house is vacant. Offers: Fixed price offers only. Paint specification: ALL TRIMS & JOINERY. Use Appropriate primer over stained timber. 2x coats of Semi Gloss Finish - Berger / Dulux "Natural White" or equivalent Equipment Please use own drop sheets and equipment/paint brushes / tape etc. Materials Will supply / reimburse paint materials, please buy from trade shop (trade price) with receipt. Estimate cost prior. Note: House has recently been painted inside and outside. Floors have been newly sanded and stained. House has been cleaned.

Rustam was amazing, very quick, professional and high quality work, highly recommend!

Joiner to fix cupboard door

$100

Dulwich Hill NSW, Australia

21st Dec 2024

The hinge on my bathroom cupboard door has come loose. It’s been repaired before but has come loose again. The door is quite heavy and the angle makes it a bit tricky to hinge and repair.

Tulgaa did a great job fixing the hinge on my vanity cupboard. He was very knowledgeable and efficient. Highly recommend!

Cabinet maker / joiner

$50

Cotham Ward VIC, Australia

16th Dec 2024

Please help, I can’t unclip my drawer from Blum laundry unit to be able to plug in new washing machine. Located in Kew. Is there anyone local that could help please?

Steve came within the hour, very knowledgeable and assisted with advertised job. Will book again soon. Thanks Steve