Find a reliable appliance technician in Gisborne

Assembly and setup of Buschbeck fireplace and pizza oven. 2 person job

Fisher & Paykel washing machine keeps saying clear filter. Have drained many times. Won’t finish cycle.

I need a new oven circuit breaker as per new requirements fitted to the existing switchboard (see photo of switchboard) and to install new oven. Will be there to assist you if you need help lifting etc. Electrical certificate is required to e provided for job to be marked as completed. New oven rating according to user manual is connected Load 4.5KW Maximum current rating 18.8 A

Need one hot water service and one oven installed. Everything on site ready to go

My kitchen double freezer has gas leak. It need to be refilled

I'm looking for a skilled tradesman who can alter a laminex bench to accommodate a new cooktop. The existing cut-out is a tad too small, and we need an extra 100mm in width (from the back to the front of the bench) for the perfect fit. To achieve this, we're looking at slicing off an additional 50mm on each side of the current cut-out, and potentially shaving a few millimeters from the opposite side as well. The new cooktop is positioned right next to the cut-out, which should make it easy to take accurate measurements before making any cuts. I need someone who has the right tools and experience to handle this job with care and precision, ensuring that the cooktop sits flush and secure in its new spot. If you have experience with similar tasks, please reach out with your offer. I'm looking to get this done next week. - Due date: Before Friday, 2 February 2024

Connect natural gas bbq to existing natural gas line. - Due date: Before Saturday, 23 December 2023

Have bought a new bbq need it connected to the house, there is already a connection there just updating the bbq - Due date: Flexible

Need someone to remove commercial gas stove and then install it back - Due date: Needs to be done on Wednesday, 19 July 2023

We need to install a timber wall (vapour barrier) between a heat pump and an LPG gas bottle at a commercial property. Build a wall 2m high, 1m in distance directly out from the building wall, between the PowerPoint and gas regulator, then a 90-degree turn to the right, for a length of 1.3m. This will result in achieving a 3.5m distance from the middle of the large cylinder to the hot water heat pump fan unit. The barrier/timber has to be silicone against the wall. Please reach out to me for further information and have a look at the attached photos for more reference. - Due date: Needs to be done on Friday, 14 July 2023

My existing kitchen cabinet (back panel, under breakfast bar) and the kick board need to be extended to allow enough depth for dishwasher installation. Need skilled handyman with cabinet making experience if possible. - Due date: Flexible

Hi, I need my dryer hung in my laundry and a timber door hung on a new door frame. Also need an ikea cube shelf put together for me

I purchased new air walker machine, the manual not that clear for me. I need some one expert in gym machines. - Due date: Needs to be done on Saturday, 30 July 2022

I need to assemble a new unboxed air walker machine.

Qualified installation of a wood fire heater and flue - Due date: Flexible

Dishwasher showing error - check water. Hose seem to have small holes in section - possibly 🐭 - Due date: Flexible

Bosch washing machine filter needs to be removed and either cleaned or replaced. We can't remove the filter, it appears to be stuck. - Due date: Flexible

Oven and stove top clean and supply and replace oven seal Any day of the week

Our fridge/freezer leaking and we are unsure why - Due date: Before Friday, 15 April 2022

I have a built in washing machine cavity that doesn’t fit my new washing machine. Need someone to modify it so that it fits. Needs to be a professional job, with the aesthetic of the laundry looking the same once done. Open to suggestions but I guess we are either cutting the bench top out to the necessary size (cut-out segment), or lifting that whole part of the bench top up. Currently the bench top is 900mm high and the washer is 940mm high. It fits width and depth fine, it’s just the height that is the issue. I’ve attached photos of the bench area and the big LG washing machine.