Find a professional aluminum fence installer in QLD

Build a 1.8m height aluminium fence approximately 45 metres

Need a handyperson to install a short 4.5m line of aluminum pool fence including gate. (We're managing the rest of project and the compliance etc - just need help getting started). It will be one 2.4m panel, one 97cm gate, and then one smaller 1m panel that will need to be cut to size. You will need to supply: - Drop saw or hack saw that can cut aluminum - Tool to dig inground post holes 600mm deep x 200mm diameter - Drill for drilling Tek screws into brackets Job is to: - Measure out and dig 4 x post holes, ensuring accuracy of measurements - Concrete posts in - Cut panel to size - Install panels - Install gate (hinge, latch etc) Pictures below of yard - it's just a line to block off back of yard at this stage. I have all materials except for tools mentioned above. Fencing is Oxworks Flat Top Aluminium Panel and Gate, and D&D Magna Latch & TruClose Hinge Pack.

Hi I need to install an aluminium auto fencing for the driveways and a small gate to access. The Width is 3770~ 3800. Can I have a free quote please. My place is in Carindale.

Looking for someone who can make an aluminium pool fence to spec. With straight and wavy uprights similar to the attached photo. Powder coated or ready for powder coating Asap 7.5m long including 1 x 1m gate

install aluminium slat fence ontop of retaining wall + along pool area (1.8m high / 65mm slats) and an axon clad fence around the pool pump area (6m) with a ally slat gate set into the axon wall.

Need to install aluminium fence

Dig 2 holes to support rails for the fence

Install aluminium fence and gate-Protector AI brand We have purchased the aluminium fence, gate, and 3 flanged posts along with all required accessories. We need help with installing the fence (one panel) and the gate along with 2 posts to cover a width of roughly 2.2m. The posts need to be screwed on exposed aggregate concrete floor. You will have to use your own tools. We have already installed one post as starting point.

White aluminum horizontal slat fence with pedestrian gate and electric driveway gate approx 30m. Supply & installation

Panels are 2.6 x 1.2 and 2.5 x 1.2 colourbond cream.

Hi, Looking for Aluminium Batten style slat fence to be trim /cut as per given dimention in picture in Mansfield area. Fence is already installed, just need to cut to given dimentions and add cap. One fence to be cut at 300mm height both side and second at 400mm height both side, total 4 fence panels.

Deliver 4 light fence panels including gate to Eagle Farm. Longest 3.1m and widest 1.6. I will help load and unload.

Pickup 6 fence panels 1200mm(h) x 2205mm(l) 10 posts @ 1800mm(l) 50mmx25mm Misc fixings

Hi, We would like some one to install a steel or aluminium fence. Thanks, Clint

Some screws holding parts of fence together have separated. I need thse to be tightened and repaired. - Due date: Flexible

A vehicle hit the fence and now needs to be repaired. The fences is for the bins in a commercial complex - Due date: Before Saturday, 13 January 2024

I have backed into someone’s aluminium fence over the weekend and dinged bent a couple of the palings. The palings need replacing and are vertical, there are tack welds in the four corners of the fence frame,have photos of the damage. The location is mitchelton - Due date: Before Monday, 25 December 2023

got 28 aluminium fence panels and need to get them put on with posts. Tasks requirents: Dig 600mm deep holes concrete 29-31 posts in ground and connect the panels to posts by screwing into brackets. Only one corner may require cutting 2-3 pcs panels to fit. Pannels size 2400mm *1800mm 28pcs posts 65mm* 65mm 28 pcs Posts 150mm*150mm 2pcs Post caps, brackets are supplied. rapid set concrete could be provided or supplied by the installer with extra costs.

Aluminium fence gate post needs to be adjusted to fit the gate properly - Due date: Before Saturday, 21 October 2023

I want to.install new fence matching to the existing one - Due date: Flexible