Find a professional balustrading contractor in Inner West Sydney

Repair and strengthen timer posts (rotten at the bottom ) maybe by galvanised steel bracket between the posts and the timber deck .

We need a balustrade to go around two sides of an outdoor landing (pictured). Total length is 2.3 metres with one right angle. All on level brickwork. Ideally it would match S/S balustrade (pictured) but different materials would be considered.

Removed glass panels from a small balcony balustrade, to repair tiling. Need to reset the existing glass panels into the balustrade. Existing rubber available, as is packing.

Glass balustrade installer needed. Need to install 20-30m glass on a concrete floor. Glass panels and spigots will be supplied. Only trade person needed to install them. Thanks

I would like to get quotation to change my existing staircase to glass balustrade, when we built the house it was not safe for children as we had little ones, now we can think of changing it to what we actually wanted

To supply, build and extend an existing deck 1.5m long and 2m wide with merbau decking timber and balustrade - Due date: Before Tuesday, 16 January 2024

Install 7 wrought iron balustrades into a metal rail. Rail needs to be raised. One of the metail rail is damaged and may need replacing. The rail also goes into brickwork on one side and will need to be puttied up as it has crumbled in my attempt to do this job myself. Some of the nail/pins that hold the balustrade in place have broken in them and will need to be removed, probably by drilling them out. - Due date: Flexible

I need to have timber railing made/installed to a verandah. Two lengths required approx 4 m for one side and 3 metres for the other side and 1 metre height. There is a timber stair rail already installed so would like matching slats. Pics attached - budget posted doesn’t include materials - this is an urgent job for tomorrow and includes time to purchase materials- raw/pretreated timber is okay - Due date: Needs to be done on Wednesday, 25 October 2023

Have a baby gate in place as a temporary solution. Need a qualified professional to both SUPPLY and INSTALL a swing gate at the top of our entryway staircase. Will add measurements shortly. Please quote for materials reimbursement and labour. Post any questions and I’m happy to provide more detail. Thank you - Due date: Flexible

I am looking for a licensed carpenter or builder who can refurbish a tired staircase. I want to modernise it by possibly replacing the balustrade or sanding and staining current staircase - Due date: Before Saturday, 23 September 2023

We are looking for balustrades for the balcony which is ready to be installed. The front fence infills and gate will be ready for measurements in 4 to 6 weeks. Please call asap. Thank you. - Due date: Flexible

I have 2 balustrades, front and rear of house. I need someone to: - Sand excess rust off front balustrade - Protect & Paint front balustrade 2 coats - Second coat back balustrade. - Stain timber both balustrades - Paint supplied by us Note: rear balustrade was already painted 1 coat but needs the cut outs properly coated and faces repainted. The other balcony has been sanded on the internal face but needs a light resanding. The street side has not been sanded yet. Also note, the balustrades are naturally made to rust, so we are painting them with an anti-rust to change the appearance. So you don’t need to remove the rust 100%. It’s always going to be there, you just need to do your best to remove as much as possible for a clean repaint. We’ve done most of the work anyway, main concern is the street side as I can’t get up on the ladder to sand/paint and I’m pregnant. We have a ladder you can work off for the driveway earlier, you can bring something else if you have something more suitable. See photos for details. Note, not interested in hourly quotes just a fixed fee. $200 is reasonable for the work we think no offers excessive of this please. - Due date: Flexible

Refurbishment of balcony ieRepair /reinforce any rotten beams ,replace flooring and build vertical slats ,replace balustrade and gate - Due date: Needs to be done on Friday, 13 January 2023

Supply and install timber balustrade to outdoor entry stairs - Due date: Flexible

Prep prime and paint stair balustrade black - Due date: Before Wednesday, 30 November 2022

Old frosting needs to be removed from 6 panels, 1000mm x 850mm each panel - Due date: Needs to be done on Saturday, 10 September 2022

We need a qualified carpenter or experienced timber worker to do 2 jobs....preferably both in the one day, but flexible with this. JOB 1 - Install 32 more rows of wire balustrade on our deck (8 of these are approx. 4m in length; 16 are approx. 2m in length and 8 are approx. 1.2m in length). For the 4m long rows, there's a 9mm timber post to drill through to get the wire fed through. All Merbau. Our deck builder had no accountability for building codes! We need this fixed for certification purposes. See attached photos - basically need to insert a row in between each row to reduce the gap to around 600mm instead of 1200mm. It's quality Merbau timber so we need someone who knows what they're doing with a drill and screws. I have all the stainless steel clips kits and 3.2mm (7x7) galvanised wire, so it's just the labour and your tools that we need, so you need to bring a swage tool that's appropriate for these measurements. JOB 2 - Install 2 x timber merbau or hard wood privacy screens against our existing fence (steel posts will likely be required for support). We will supply the screens - they are approx. 1800 x 900 each screen. Thank you

Hi, I’m looking for someone to repair 3 balustrade’s that have been damaged. EDIT: for some reason the location section won’t let me put in the correct location, the job is located in Caringbah South, 2229

Need wire balustrade supplied and installed, to match photo as shown. 6 lines of wire, total length of fence is 276cm. I’m not sure how labour-intensive this will be, so am not sure exactly what the job is worth. I’ve put the job at $200 but am happy to pay a reasonable fee for the job so please feel free to send me offers. - Due date: Before Monday, 20th Dec 2021

My vertical metal poles need stainless steel wire to make them safety compliant. I've no idea what to budget for this small job, so I'm open to negotiation.