Find a professional tiler in South Brisbane

A piece of concrete tile has cracked and fallen off at pools edge. Job for glueing it back. If you can supply the concrete/stone adhesive or liquid nail and clamp until it cures

Cut out old broken shower tile from wall (see pic)without breaking nearby tiles; re-water proof the area; then glue new tile on wall; and grout. (I have the new tile already - 200mm X 100 mm)

The old bathroom tiles needs grouting / resealing and the gap where the tiles meet the bath needs to be sealed too

Tiling a square section from bench to ceiling in laundry and then bench to underside of overhead cabinets in laundry. White penny rounds with white grout. Have got tiles already

waterproof and tile staircase

Need my staircase waterproofed and tiled, just one step.

Looking for a tiler to do a standard tiling 600 x 600 in my Store room 2 x 1 meter only possibly today or latest tomorrow

Looking for a tiler to do a standard tiling 600 x 600 in my Store room 2 x 1 meter only

Looking for a tiler for a small job just to do a standard tiling in my Store room

Lay 600x600 tile on top of existing tiles, size of front entrance is 1590x2240. You need to have tile cutting tools, tile leveling clips, I provide tiles and tile adhesive powder.

I need a tiler for my small bathroom. I will provide tile. About 15 square meters

Need 16sq meters of tiles laid on balcony .. tiles grout and glue are on site already .. thinking straight stick over old existing tiles

Waterproofer needed to waterproof shower and bathroom area before new tiles go down

Tile a small display no grouting flat lay with no more nails that is supplied. $60 per hour

I have two damaged tiles that need urgent replacement I’m looking for professional tiler or someone with years experience and insurance Needs to be a professional job done quickly

Refresh of ensuite bathroom. New shower screen, regrouting or retiling plus toilet sistern replacement.

1. Add mortar bed to increase the existing level of the concrete to cover old skirting (by about 7cm as per photo) 2. Tile over it (tile size is 200mm by 1200mm). Tiles will be provided. 3. Total floor size is 236cm by 228cm 4. Skirting of tile

Remove 1 tile waterproof and relay the tile, grout & re seal

Remove existing tap ware Re-fit existing tap ware on completion Remove tiles to the 3 walls above bath Replace villaboard as required Mask & tape outline of shower over bath outline for waterproof preparation Apply 2 coats of waterproof Fit 300 x 600mm white wall tiles to 3 walls above bath Grout walls Inject white silicone to wall joints Silicone bath perimeter

Need to regrout the bathroom floor and one strip of the wall.