Book a professional blind repair service in Coorparoo

Remove 3 x Venetian and 2 x roller blinds. Install new roller blinds - 3 x single sheer and 2 x double (day/night) blinds.

Looking to have someone remove and dispose of 6 crank handled roller shutter blinds on the outside of my apartment on level 2. They’re crank handle controlled from the inside by a wire. 2 are on the front of the building, 4 are on the sides with part of them under the eves. It looks like part of the concrete board might need to be removed to access the roller mechanisms on those 4. 1 of the four is on the balcony which should be easier to access. Please ask me any questions you might have. I have circled the roller shutters in each photo to show you where they are.

Please help me to hang one 2.4m roller blind up. They require 2x mounting brackets to be drilled into a concrete wall. TIA 🙏🏻

Need to install 5 curtains and 2 roller blind. Must use wall mates if not screwed to battens. Curtain must hang off the floor. Supply and install. I will pay for the curtains and roller blinds from bunnings or spot light. Please submit offers. Thanks

Replace the broken blinds with new one Blinds I already bought

I have 1 outdoor roller blind from Bunnings https://www.bunnings.com.au/coolaroo-heat-shield-2-1x2-1m-crank-operated-outdoor-blind-graphite_p0480580 that I need to have installed outside, on a brick wall. I would need you to: 1. Install the outdoor blind onto the brick wall (see photos) by: a. Pre-drilling the holes into the brick wall, above the window frame. Install the rawl plugs into the holes. b. Screwing brackets into place. c. Inserting the blind into the brackets (wall mount option). 2. Fitting the crank handle. 3. Installing 1 pair of bungee cord receivers, with one receiver on either side of the window. The receivers would be positioned at about 3/4 of the way down the window frame, just above where my portable air conditioner exhaust hose's outlet is. The window size is approx. 1800mm (width) x 1200mm (height). The blind is 2100mm x 2100mm and will jut out on either side of the window. Easy access to the window since there is a deck in front (as per 2nd photo - I can move the table out of the way). I will supply the roller blind, brackets, crank, bungee cord receivers, screws and rawl plugs. You will need your own tools, e.g. ladder, power drill, Phillips head screwdriver and drill bits, pencil, spirit level, and tape measure. Dates/times available: Thurs. 14 Dec (morning); Friday 15 Dec (afternoon); Sat. 16 Dec (flexible); Sun. 17 Dec (flexible); Mon. 18 Dec (afternoon); Tues. 19 Dec (flexible); 20 Dec (flexible); 21 Dec (flexible). Easy parking in front of my home. My suggested budget includes the AirTasker fee. I welcome your offer, including the AirTasker fee. - Due date: Before Friday, 22 December 2023

Fallen full length Luxaflex blockout blind x 2 - Due date: Flexible

I have three blinds that need to be hung - Due date: Needs to be done on Friday, 28 April 2023

I have purchased a roller blind and need assistance installing it. It will require drilling into a concrete wall, which I don’t have the drill for. Should be an quick and easy job as posted the same job for the rooms next door. Most likely will need a small ladder too. - Due date: Before Thursday, 6 April 2023

5 sets of roller blinds to be collected and cleaned. Returned to my Unit and refitted. - Due date: Flexible

Have a 2400mm x 2400mm roller blind night day that needs to be installed in a master bedroom in Cooparoo area and remove existing vertical blind - have measured 2430mm - seeking experienced installation! Looking for someone to assist. Regards Andrew - Due date: Flexible

I have 2 x 2300mm W roller blinds that need to be installed - hung/screwed into top of internal window frames. There are plantation shutter frames that need to be removed (seems to easily screw out) and then replaced once blinds are up. There is room for both in window recess area. Thank you - Due date: Before Monday, 8th Nov 2021

7 large cloth window Roman blinds - 6 have cane through the blinds as strips- color white

Install Blind into room at Gym *4m wide roller blind to floor

Install two roller blinds into concrete/ brick windows. Will need to supply own tools and drill bits. Freshly painted unit and quick job with the right tools

Experienced handyman to fix roller blinds and quote to motorise

Hi Leonie would you be available to install the last of the blinds for us?

I’ve got 6 outdoor rollup blinds that need to be screwed in. There’s only 3 screws for each one, the only thing is it’s going into hardwood so my drill wouldn’t do the job!