Book a professional blind repair service in South Brisbane

Install an external clotheline and two outdoor roller blinds. 1 hour of work. A second pair of hands can help if its this saturday.

Have bought roller blinds. They can cut to be adjusted as they are 25 mm too wide. There are 3 blinds. Any experienced help appreciated

Replace the blind spline and reattach.

One of the rollers of my blinds got stuck and will most likely need a replacement or repair.

The white clip that was sitting behind the bracket has snapped on one side of my blinds Need repair of bracket for my blinds

Fix brackets to concrete wall and install double roller blind in kitchen

Manufacture and install aluminium blinds for an outdoor alfresco area Area to be covered - 2825 x 1611 Colour - white

5 x roller blinds hung, 1 x 1200mm, 3 x 1800mm, 1 x 2400mm

Install 3 outdoor blinds on a steel post. You need tools and metal screw that can hold at least 20kg per screw. Quote for install only in Ormeau on Wednesday morning 9/10/24

Venetian blind mechanism not working. Doesn’t tilt

Hey guys, I just need a blind curtain installed in one bedroom. Easy job.

Remove 3 x Venetian and 2 x roller blinds. Install new roller blinds - 3 x single sheer and 2 x double (day/night) blinds.

Please submit quote for installation roller blinds

Install 2 Patio Bolts, install 2 roller blinds, install letter box

My roller blind has come down to the ground -unable to do it myself

Two blinds were taken off but unable to install them back. Tried to screw the bracket back in the window frame but unsuccessful.

I have 2 outdoor shade cloth blinds that require fixing to the timber fascia on my deck I have tried fixing to the ceiling (which is like hardiplank and they fell down I cannot lean out over the deck railing far enough to get it onto the timber facing You will require tall ladder as it is highest

Wanting to install 2 x venetian blinds (150cm wide) into timber window frame in front of block wall.

Looking to have someone remove and dispose of 6 crank handled roller shutter blinds on the outside of my apartment on level 2. They’re crank handle controlled from the inside by a wire. 2 are on the front of the building, 4 are on the sides with part of them under the eves. It looks like part of the concrete board might need to be removed to access the roller mechanisms on those 4. 1 of the four is on the balcony which should be easier to access. Please ask me any questions you might have. I have circled the roller shutters in each photo to show you where they are.

Blind mechanism has a fault that needs fixing. The pulling mechanism has failed.