Find a local excavator service in South East Perth

Bore pump used for retic water is not working. Not sure what the issue is.

Drilling of 18m 100mm Bore Water Hole and install 2 plain PVC casing , 1 Slotted PVC Casing, I will provide supply, 2 plain PVC casing, 1 slotted PVC Casing, 100mm bottom Cap, 40mm Bottom Fitting , 15m Poly Pipe, 40mm Top Elbow, Top 100m Cap, 15m stainless steel Cable, 1.5 Protege submerging pump, 40mm to 25mm adapter, 25mm value, Valve Casing.

Hi i have new borewell drilled and installed yesterday need someome to connect my retic system to the borewater its not a big cos got retic system with house water just only need to change to bore water thanks

Can’t on my sprinkler. Maybe bore issue

Had our bore guy out, he suggested a electrician

Repair of bore with a tripped breaker. It was working at the beginning of the week but now tripped every time. The bore was in place for 3 years. Am using a Hunter controller. Could be the breaker or the pump so am flexible on the charge depending on the diagnostics.

I need a hole drilled for bore water Water is at 18 metres Need drilling to 25 meters and lined I have the rest of the gear required

two points of leakage in retic pipe, we have bore water in use if that makes any difference - Due date: Flexible

Connect retic to bore - Due date: Needs to be done on Friday, 24 November 2023

Water is down 26m Need it drilled and lined Have pump and pipe and all other stuff Needs to be cheap - Due date: Flexible

Hi there, I have an issue with my reticulation system and all stations stopped working. The controller (Rain Bird – ST8x-WiFi) is working and sends the signal to the bore box. The bore box is powered, the relay is clicking and it sounds like power is going to the bore pump. Do you have availability to come and have a look please? - Due date: Needs to be done on Thursday, 23 November 2023

Old bore has a check valve that needs replacing - Due date: Flexible

Bore pump isn’t priming. I’ve already purchased new check valve. I Just need it fitted. - Due date: Before Monday, 23 October 2023

Bore installed, electrics connected with relay, not connected to the coil and the bore bit on retic controller. Need the bore piped to our main solenoid/pipe about 5M away with the anti backflow and maybe pressure reducer?? and then cap off the old pipe from the water meter (6M away from bore) Will require some trenching from bore to main pipe. Then test and check :)

Service the retic at front and rear and garden beds: test and program the controller. Replace any broken heads. Replace sprayers near brickwork with alternative watering system to reduce stains. Show tenant how to use controller and provide manual from internet - Due date: Flexible

I’m looking for some drilling company to drill retic bore in my drive way, close to existing solenoid box so that piping work can be reduced. The retic controller is 4-5 meters away . Preference is to have both drilling and electrics done by one contractor. - Due date: Flexible

Bore pump currently has power and working. I have a reticulation controller that need to be connected to the pump. My landscaper will setup the stations/solenoids etc. Just need the controller to the pump electrical connection setup Each time the controller now starts we want the 24v feed operate a 24 volt relay that then initiates mains electrical power to the pump start. - Due date: Before Wednesday, 8 March 2023

Job is to flush cut a concrete bore liner so is flush with a newly poured concrete driveway - Due date: Flexible

Modify existing 2 valves bore water system to 4 valves. Will expose undercover bore and valves. Will provide valves for replacement. - Due date: Flexible

Replace sprinkler controller. There is only one station. Exiting system is old n obsolete. Just replace controller - Due date: Needs to be done on Thursday, 8 December 2022