Find a professional brick paving contractor in Sydney

Hi, need a landscaper to compact sand and lay approximately 20sqm of herringbone recycled brick paving. We have the bricks.

Preparing a small dirt area (1.4 x 2.8)for paving, creating base and laying bricks, sand, compact, edge restraint where bricks meet grass . Bricks already on site. base materials can be provided or purchased by me. I have level snd mallet and other Specialised tools to be provided by tradesperson (compactor)

- 23m2 approx to lay brick pavers - minor site leveling with compact fill and membranes - 30cm x 7m (tbc) trench garden bed (soil to be removed off site) - moving tap location

I need brick pavers to be relayed. The dimensions are approximately 600cm x 80cm. The pavers were removed to access plumbing. The job is to apply the road base and lay the pavers which we will supply. Please see photos provided. The job is in Marrickville, NSW.

approx 16 sqm of brick pavers to be relaid

Hello, we need to remove about 4 m2 (2 m by 2 m) of top soil, prepare gravel and sand base then pave the area with garden pavers. Currently we have about 100 paver blocks, sufficient gravel, and about 2 bags of sand (please see photos).

Surry Hills Terrace has a brick paved courtyard approx 25m2. -Lift and relay 5m2 of brick pavers down side of house 5cm lower -Supply and lay brick pavers to two sections of courtyard approx 5m2 to take paving to edges of yard. -Lift and relay approx 1.5m2 of brick pavers that have sunk. -Ensure courtyard is level and sloping so surface water is directed away from house. Tasker to supply all brick pavers, sand, gravel and tools. - Due date: Flexible

Front yard paving job in Glebe All previous hard surfaces have been removed. The job involves subsurface preparation, compaction and paving draining to street using the existing slope from house to street Standard brick pavers - 230mm X 114mm X 50mm Approx 15sqm – see photo for dimensions Brick pavers - will be onsite to ready to go once date is confirmed Please provide references/photos of previous work and come for look - Due date: Flexible

We have 23 square metres of paving. They need to be pulled up (we can do that). Then the ground needs to be levelled so water drains away. We need more base and it would need to be compacted with a wacker packer. And then the pavers would need to be relaid. One part of the pacing needs edging.

I need a skilled landscaper to finish my patio. It is about 45sqm big. I have done all the excavation work + I have also already laid 3 layers of roadbase and whacked it. I have the remaining roadbase available (1.5t) / 2.5t of riversand / 2000 pavers. What is left to do: - lay out flat the last layer of roadbase - Sand bedding - Lay the pavers in a herringbone pattern - build a small retaining wall (if enough pavers available). Due date: Flexible

We require an experienced person to apply polymeric paving sand (with use of a plate compactor) to our recycled brick pavers. The brick pavers are already laid. Brick area is approx 10sqm. Tasker to supply quality polymeric paving sand (eg, Boral Pave-lok) and plate compactor with protective mat. Cost of paving sand can be reimbursed separately. Flexible about dates, will need a sunny forecast for a few days.

I'm flexible about when this job gets done. Any time in the next fortnight is fine. I have a big stack of brick pavers that was previously laid on sand. I pulled them up before an extension was built. I now want them re-laid on sand in a strip 1.5m x 7.2m (26 square metres in total). I will supply all the materials, so I'm after a quote for creating the correct level, spreading and compacting the base, then laying the brick pavers. I need a slight slope away from the building so water drains away (not towards) the building. The excess soil you remove to achieve the correct level can be dumped further down the garden (the site is gently sloping and I'm trying to make it more level). Along the edge of the building I want the paving to be at the same level as the silver drain grate you can see in the pic. The finished level of the edge of the strip furthest from the building will need to be about 10cm lower than current ground level. I will finish the garden edge furthest from the building to stop soil subsiding onto the path (I'll probably use a single treated pine sleeper), so don't worry about that part. The soil is extremely sandy. I am happy to order whatever base material/s you like to use - road base, crusher dust, or just sharp sand, or two of these materials. No matter what base material you choose to use, I would like the base to be compacted before the pavers are laid. Please indicate what approach to bedding you like to use. I'm not sure what a fair price is, so I've guessed. You'll tell me, I'm sure!

Description: Site preparation, supply and installation of any required sand/topsoil, soil removal/skip bin and supply and installation of brick pavers. Approx floor space of 40M2. Would like something similar to the last photo Pictures and measurements can be sent via email if an email is supplied. Work required ASAP. Marrickville Location.