Find an experienced cabinet maker in Melbourne City CBD

I require competent cabinet makers / installers for various installs around melbourne. If you do not have high attention to detail or If you are not equipped properly for this line of work please do not apply. Must have: - Own tools for all aspects of the job, including laser, planer for scribing etc etc - Own vehicle to get to the jobs - Prompt timing, turning up to site on time when jobs are confirmed - Able to modify cabinetry, cut down kickers, panels, scribe to wall etc where required - Read and execute plans provided - Install highly custom cabinetry / carcasses + doors / panels / draw fronts to all aspects of a home, not just kitchens. - High level attention to detail

Looking for a cabinet maker to build custom made and install. Require an under-bench cabinet with drawers. We have a plan but will need your advice on if this is possible. Please see details below.

Looking to hide the cables and pipe work for this tank. theres another pump that I’ll be installing that will be about the size of a basketball. Looking for some sort of cabinetry or any alternatives, looking for different options. Photos for reference would be great!!

Looking to have 1 wardrobe built (left only to plan where the green arrow is) made with sliding doors for hanging clothes and shelves above and under. I would like it to be made so that further works down the track can be done for a built in wardrobe and floating desk aesthetic across the entire wall. I have included an example photo of the final look, noting only the left wardrobe is to be completed for the moment - depending on price. The wardrobe would be white, and timber as per the aesthetic photo. The desired wall for works, is the one with the small window. Please include a quote for just the 1 wardrobe, however, I’d also like to know a rough quote for the entire works to see if I can budget for it.

Cover a Rectangular hole left in bench top after removing an appliance. And a smaller hole in bench top also. Larger hole 490mm x 267mm and 110mm x 147mm. Price flexible depending on materials used

Melbourne VIC, Australia I require competent cabinet makers / installers for various install work around Melbourne. If you do not have high attention to detail or If you are not equipped properly for this line of work please do not apply. Must have: - Own tools for all aspects of the job, including laser, planer for scribing etc etc - Own vehicle to get to the jobs - Prompt timing, turning up to site on time when jobs are confirmed - Able to modify cabinetry, cut down kickers, panels, scribe to wall etc where required - Read plans - Install highly custom cabinetry / carcasses + doors / panels / draw fronts to all aspects of a home, not just kitchens. - High level attention to detail

I require competent cabinet makers / installers for various installs around melbourne. If you do not have high attention to detail or If you are not equipped properly for this line of work please do not apply. Must have: - Own tools for all aspects of the job, including laser, planer for scribing etc etc - Own vehicle to get to the jobs - Prompt timing, turning up to site on time when jobs are confirmed - Able to modify cabinetry, cut down kickers, panels, scribe to wall etc where required - Read plans - Install highly custom cabinetry / carcasses + doors / panels / draw fronts to all aspects of a home, not just kitchens. - High level attention to detail

Dimensions are mentioned and purpose is mentioned in the picture

There are 3 book cases which needs adjustments from the base as it is not sitting flush with the wall partition. See pictures below. Assistance is needed with adjusting slant on adjoining bookcases and adjusting slant on another so it is not leaning forward. Will also need assistance with working out how to affix the bookcases to partitions so it is not leaning forward.

I am moving in CBD apartment and would need some floating shelves and TV unit - Due date: Flexible

Want to make a custom shoe cabinet - Due date: Before Thursday, March 16, 2023

Hi, I’m looking for someone to make a custom tv unit. Approx 3.7m in length, and 0.4m wide, with a high shelf component on one side of approx 2.7m high with some brash mesh. I have plans that I can share. I’m open to material recommendations as long as it’s within the colour palette of the plans. - Due date: Flexible

Need a frame made for an L-shaped counter for base cabinets to sit behind. Frame is approximately 2.3m x 2.3m, with one side being 22cm wide and another 10cm. Height is 1.1m high. It will need be sturdy as the frame will be topped with a slim piece of engineered stone (30cm wide and 2cm thick). Both sides of the frame to be covered in 18mm MDF. - Due date: Before Sunday, 12 March 2023

Hi, I need a professional cabinet maker to build a custom dreambox craft storage solution on wheels complete with crown finish with a LED light and retractable table. Price inclusive of all materials and labour (but not plastic storage containers - I will purchase those separately). I can also purchase plans for you to follow if this helps. Professionals with cabinetry experience need only apply. Thanks, Steph - Due date: Before Friday, 20 January 2023

NEED A CABINET MAKER WITH TOOLS TO ASSEMBLE MEETING TABLES IN MELBOURNE CBD. MINUMUM 3 DAYS WORK $360.00 PER DAY - Due date: Needs to be done on Tuesday, 13 December 2022

Hi there I have purchased a fridge I would like to fit in specified cupboard kitchen space. The refrigerator will be delivered tomorrow Monday and here are attached all the related measurements and photos. space to fit (measurements) Depth 72cm Length 165cm Withd 75cm Here is the fridge information: https://www.winnings.com.au/project/a5b42cc3-25de-2027-7237-f81f85086a42 Thanks in advance Papa - 0488 996 473 - Due date: Needs to be done on Monday, 31 October 2022

Carcasses are made and Dragon Pro drawer runners are already installed, but we want to have our drawer fronts cut and edged from Elton Group pre finished veneer boards (at a CNC factory), which will then need to be attached to the drawer runners by lining up the drill holes on the drawer front insides to the drawer system. We have the DTC jigs for this. There are 19 kitchen drawers of various sizes. - Due date: Before Friday, 30 September 2022

Hi, Looking for a prof and experienced cabinet maker for caravan interior joinery. Only contact us if you have the tools, equipment , labour and setup to take on jobs. If interested , please get in touch. P.S: please consider this as a long term deal where we Would bring you jobs and you provide us with the cabinets as per client requirement - Due date: Flexible

I am looking for experienced cabinet maker or carpenter to help me renovate my small laundry. Please read below carefully. First 2 photos is what it looks at the moment and photos 3,4 and 5 is what I would like to achieve My budget I am happy to pay $900 Cash for labour ( one or 2 days work) and I will pay for all material etc… - Due date: Flexible

I have several kitchen cabinets and cupboards that need to be made - Due date: Flexible