Find a professional local car service in WA

looking for cheap car stero intaller to install my cd play in my hyundai getz what price can do it

Rear brake pads n rotors

Fit camera on Cruze 2014 hatchback.

Timing belt replacement required. Completed a major service with RAC yesterday. 272k km on the clock, other than that, car is in good nick.

Need help wiring up aftermarket reverse camera to aftermarket head unit. Not sure which wires are the right ones or I’m doing it wrong. Make sure you have your own tools I am lacking some tools.

Hi everyone I’m about to get my VIC plates transferred into WA ones. I’m going though checklist and need to get an immobiliser. Who can assist? Any auto-electrician around? Please make offers :) thank you

I have install a fitcam on my Corolla cross but it has now power light showing. Remainder of installation working oOK

The senses aren’t working, cable cord snapped off and battery.

Check why current parkmate reversing camera not showing image on screen. If unable to fix install new parkmate camera in volvo c70. You would need to be familiar with setup. Parkmate camera supplied by me.

I want someone to attach the computer and check fault in my car, Hyundai Elantra 2014

Oil change and filters changed on my 2011 Hyundai i30 and also passenger side headlight bulb changed (driving light not dimmer/high beam). Oil and parts supplied. I have a standard jack but do not have any ramps etc for raising the vehicle.

Bought the car. Put a new battery in as it was dead . Engine cranks but doesnt start. Can hear fuel pump. Everything else lights up and works.

Chasing a Mobile Mechanic for 2003 Subaru Forrester for this weekend. Im organising it for a friend. Car was serviced 18mths ago and these were the notes: WORK DONE: SERVICE AND CHECK OVER AT 297375KMS REPLACED OIL AND OIL FILTER STAMPED LOG BOOK REPLACED BOTH HEADLIGHT GLOBES TEST DRIVEN FUTURE WORK: FRONT TYRES DUE TO BE REPLACED LH REAR TYRE DUE OT BE REPLACED RH WHEEL BEARING DUE TO BE REPLACED- COULD POSSIBLY NEED CV SHAFT TO BE REPLACED DUE TO DAMAGE WIPER BLADES NOISY AND MISSING CLIPS- RECOMMEND REPLACING COMPLETE BLADES MISFIRE AT IDLE TIMING BLET HISTORY UNKOWN- DUE EVERY 100,000KMS- RECOMMEND REPLACING IF HISTORY STILL UNKNOWN FAN BELTS DUE TO BE REPLACED- RECOMMEND REPLACING WITH TIMING BELT FUEL FILTER HISTORY UNKNOWN- RECOMMEND REPLACING IF UNKNOWN ALL ROTORS HAVE RUST (SUSPECT CAUSING SOUND) - PADS IN GOOD CONDITION ENGINE LIGHT WAS ON- SCANNED AND CLEARED CODES OXYGEN SENSOR CODE APPEARED- LOOKS IKE SENSOR HAS BEEN REPLACED PREVIOUSLY I know some of that is major. So maybe if we cpuld just do a general service and check over and confirm the above points. But if timing belt and fan belts can be done affordibly this weekend then i am happy to have it done I will find out what her wheel and tyre size is and look into getting that done

2018 Holden Colorado has one code check number plate light need fixed and code cleared and cb radio installed

Basic Service a BMW and Ranger, will supply oil and filter

Have a Holden Captiva 2015, about 180,000km. Car was running ok, wanted to replace one of the Glow plugs. Removed the injector fuel lines to get to the glow plug, couldn’t get some bolts out, decided to put back everything. Started the car it ran on idle for few minutes then stalled. Fuel leak on the injectors lines, tightened the lines. But car won’t start. Tried priming with the switch on, but nothing Either air lock in the fuel system or low fuel pressure or could be something else But car was running smoothly before I removed the lines

Just a quick once over. Particularly of the engine. It all looks pretty clean but I’d like to make sure

Need swapping the rear bumper and side fender of Subaru Impreza 2005 from donor car and minor electrical work of changing wire on light. I will assist and give hand to you.

I have sourced the parts so only labour is required. Change of break pads and rotors for 2 front axel only. Probably looking for labour to be done from the 8th July onwards.

Hello, I am looking after a mechanic around Perth WA (please provide me proof of your mechanical skills) to change : - front break pads and rotors - wheel bearings This is to be done on a NISSAN PATROL GU Y61 TI 4500 - 1997 The budget of 10$ is required however please provide your best offer including parts and labour and your availabilities