Find experienced local carpenters in Bowral

Small area of wooden benchtop has been stained with water due to a coffee machine. It needs to be re-sanded and restained/sealed

Back wall and sides assembled. Roof and front needs assembly and the the shed put up and bolted down. Ive run out of time - need someone to finish it. 3m x 1.5m

Grader blade assembled & attached to tractor 3 point linkage. Slasher converted to Cat 1 from Car 2.

Require a small rear deck to be stained. Hasn't been stained since installed and very dry. Would like a merbau type stain but not overly fussed. House is located 2mins drive from Bowral private hospital.

We need an extra room to be an office. We have looked at a few options and have seen a ‘platform’ in a large stairwell. The first photo is NOT our house but what we have seen done. The other photos are our stairs/ entrance that looks almost identical- looking for a price to see if this is a feasibility. Thanks

Need no more gaps added in above this cornice.. probably 2 hours work max

Build and instal a cellar out of tasie oak as per the pictures.

Build a 3x 3 deck in merbau 138mm outside bedroom, will require posts and bearers only 220mm drop off.

Need to install gyprock bulkhead and cornice in kitchen and laundry. Include materials in your quote.

I need a ABSCO shed built on Friday / Saturday or Sunday this week Easy build / pre fab / pre drilled / need to bring tools - see picture - just need experience in putting together sheds / shelves / etc Size 3m / 2.1m / 2m Not hard just need a couple of hours Need to have experience in building sheds or similar I’m flexible re price for the right person and quick turnaround

Replace external backdoor to a flat. would reccomend 820x40x2040 solidcore ( Available at bunnings I/n 1974965 for $198. Paint and fit 1 weatherstrip Some trimming of door to fit existing door size may be needed

Garden shed steel doors need repair as they cant be locked & are not meeting evenly. They are pull out doors.

Need a decking job in the pergola. Roughly 100sqm. Can do with or without materials. The area is currently paved. Deck has to go on top of the current pavers. - Due date: Flexible

Need a handyman/ carpenter to install 6m of fibro sheet in bowral using plastic h moulds. One area existing has already been removed and one area needs to be removed. Please see photos - Due date: Flexible

Have a deck that needs timber cladding for the lower part to hide the posts and exposed brick that can be seen below the deck. Frontage to be covered is 6M long and 2 m wide at one end that is exposed, and 1.7 M high Small job - happy to supply the timber . - Due date: Flexible

2x veneer finish fire doors needs to be stain as per existing one. Thanks - Due date: Flexible

Build platform to hold glamping tent of the ground - Due date: Flexible

I’m looking for someone who knows a lot about tools who would be able to sort through a shed to reorganize and minimize and see what works and doesn’t. The shed has come with the property and I wouldn’t know where to start with what to keep and what to get rid of! The tools are mainly hand pocket tools. Electric screwdrivers, nails, saws etc Maybe a carpenter appprentice might want some extra cash to do this? - Due date: Before Friday, 13 January 2023

Hi, I need a loft space gyprocked in Bowral. Approximately 40m2 with tight access. Would need the ceilings done asap so we can then finish the external frame as it is the only way to get gyprock in then return to sheet and set the inside of the external wall we built

Looking for a carpenter or handyman to build a timber bench seat for our dining area. It should have hinged lids which act as the seats. The lids can have a slight overhang from the base so it’s more comfortable to sit. Pretty standard bench seat project. Dimensions: 2600mm x 950mm x 400mm Example image uploaded. Painting not required (unless you want to quote to do it) Cushions not required. - Due date: Flexible