Find experienced local carpenters in Brunswick VIC

I need someone to dismantle existing kitchen cabinets and install new ones. I have already purchased the new cabinets. I'll also need to remove the current oven rangehood and put a new one. Pictures show the current kitchen and plans for the new kitchen

I am looking for a quote for a new bathroom door. The space is quite small so they got creative, installing a PVC folding one, however it’s come to the end of its life. Ideally I’d like a wooden door, although conscious of space. So, if possible maybe a bifold door? Open to options depending on price. I’ve attached some photos of the current situation and the limited space around it (both inside the bathroom and hallway). The door measures 79x30”. Please let me know if there is anything else I can provide to try and help provide a quote. My neighbour is also looking for a new door, same situation, if that helps with the pricing 😇 x 2 I work from home a few days a week so can be available if easier to pop round and take a look. I look forward to hearing from you. Cheers, Hannah ☺️

I need two verandah decks cleaned and stained. One is out the front of the house, other is directly above (internal access). The bottom one needs to be covered while upstairs is being stained (someone will be on site to assist with that). Does not require sanding. All supplies and equipment will be provided (pressure washer, washing liquids, brush, water based decking oil, decking oil applicator). Bench seats and pot plants will be moved prior to the job. Only time constraint is noisy parts (pressure wash) must be done around twin toddler nap (over lunch). Happy for it to be done over two days, however need the downstairs deck finished within one day (only pram access). Approximate dimensions are 1.45m x 9.6m, plus downstairs has door nook 1.2m x 0.6m and single step.

I need a skilled handyman or carpenter to repair a damaged floor panel in Bedroom 2. The panel is located in the back left corner of the room, close to the bed, and has become concaved underfoot. The issue seems to be due to either termite damage or the panel’s age, and it’s now a safety hazard. The job will involve: Assessing the extent of the damage. Removing the damaged section of the floor panel. Replacing it with a sturdy, matching panel. Ensuring the repaired area is level, safe, and aesthetically consistent with the rest of the flooring. Please bring all necessary tools and materials. The dimensions of the damaged area will be provided ahead of time. I’d like this to be completed on Sunday. Let me know if you have any questions or need additional details!

We have some open shelving that we want glass doors over. It would be 2 doors. As its a loft room the top is angular, so this job would need good thought and attention to detail and a high quality finish. We would like a thin black frame (like aluminium) with glass doors. Needs to be completed in the next 2 weeks.

Hi, I have scratches on my wooden floors. They are several options for repair. I have spear floorboards or I have wooden paint kit for repairing also, lefting scrathed floorboard and sawing in new floorboard. . I'm seeking experienced person for the job. I can't make exact payments as it will depend in method. Payment will be made after successful job completion.

Shed - L 1.5m x D .75m x H 1.95m Skillion Roof On Concrete base New -still in box For small courtyard garden storage Pensioner rates if possible pease

Hi there! I'm reaching out for my small office in Brunswick/Coburg who are looking for a tasker to pick up and install three doors for us. There are currently doors on which will need taking off, and we are ideally after the current doorknobs to be transferred onto our new doors. The pickup location will be 'The Door Store' in Moorrabbin - each door is 2040 x 820 x 35mm and roughly 30kg (might be worth bringing a helping hand!). Our office is up roughly two flights of stairs, and I will be able to help carry things up upon arrival. Please see attached images of the current door hinges and knobs. Feel free to reach out with any questions! Cheers

I’ve finished installing ikea kitchen but I’ve lost confidence on joining the bench top and need some help finishing it off. Two bench tops need to be joined neatly and I’m worried I am going to bugger it up, so I’m calling on the help of a professional! The bench top is wood veneer and needs 3 pieces to make it all work as per the images. (Just the left side top, the right side is already installed. I have all the materials and probably the tools to get it done.

Seeking Skilled Carpenter/Builder to Construct Lockable Storage Units in Existing Cabinets I’m looking for a reliable carpenter or builder to create secure storage spaces within my one-bedroom apartment in Brunswick, as I'll be leasing it on Airbnb. The job involves constructing small, lockable units within existing cupboards to limit guest access to certain areas. Project Details: - Bathroom Cabinet:There’s a two-shelf cabinet; I need a lockable door installed on one of the shelves to keep it secure. - Linen Cupboard:*It has seven shelves, and I’d like a door with a lock installed on one of the shelves for restricted access. - Bedroom Closet:This has two sliding glass doors, and I want to secure one side with a lockable unit. Due to the glass doors, this may require building a lockable inner cabinet or other creative solution. Budget:open to offered. Hoping to spend approx $500 (and I’ll pay for the materials) for the entire project, including assessment, design, and labor. I expect minimal materials but can discuss if more are needed. If you have experience with custom cabinetry or similar projects and can provide a secure, professional finish, please reach out with your availability and any questions!

Looking for quote to rebuild our old style verandah. We have removed the old verandah. We will supply White Lattice and Polycarbonate Roof. You will supply the wood beams (grey). First image shows current state, we have removed the old verandah. Pictures 2+3 indicate what we want built. Dimensions 550cm 210cm

Open kitchen cabinet 4 shelfs measuremnets are ; H 163 cm x W 35 cm x Depth 35

Note: I set the budget to $5 because I had to pick a number. I am looking for quotes. Garden shed to be installed: https://www.spanbiltdirect.com.au/yardstore-s42-s Will also use the floor kit, as it is to be built on top of dirt, not on a slab. This is the kit I will buy: https://www.spanbiltdirect.com.au/small-floor-base-frame-kit

Looking for someone who has experience in building flat pack sheds. We have this shed in our backyard ready to be built. https://easyshed.com.au/products/skillion-roof-garden-shed-1-5m-w-x-2-25m-d-classic

Looking for someone who has experience in building flat pack sheds. We have this shed in our backyard ready to be built. https://easyshed.com.au/products/skillion-roof-garden-shed-1-5m-w-x-2-25m-d-classic

There are a about 6-8 small/faded rust stains and one larger one. The staining is on concrete - in an outdoor apartment on the 5th floor. I have tried to remove the stains with vinegar and CLR, but they are stubborn. Need a professional to take this on with stronger products. I need this work done quickly – as I’ve already moved out of the property and have been asked to rectify following exit report. Would be great if it can be done by lunchtime Monday, but have some flexibility into next week. Building has lift access, but there’s no water source on the balcony. Private parking under building also available for smaller vehicles.

The removalists removed the 10 drawers then replaced them in incorrect drawer spaces and damaged some of the runners in the process. The photos show how the drawers Noe sit - added to which it is evident that the replacement of the drawers has been mismatched - should be alternate colours and wood facings along the chest

Help 2 x other people construct an Easyshed in our backyard. It's a small shed 3.75m x 1.5m x 2m (high). We want someone who has assembled an Easyshed before to join us for 2 x hours at the start to help us knock this project off as efficiently as possible. Use your experience to help us out plus a bit of hands on then we'll finish the job ourselves. It's basically a consultant with a bit of work. Pretty cruisey. Paying $65p/h. It's going on a concrete slab that's cured for a month. (Pic attached). You wont need to help with drilling the anchors into the concrete. That'll be last. Look forward to hearing from you...

Need help installing a 3x2.25m garden shed on concrete. Concrete fixings provided.

I need the legs on my wooden bed frame cut down. There are 8 legs in total. Each leg needs to be cut to a specified length and sanded to ensure smoothness. You will need to bring your own tools.