Find experienced local carpenters in Brunswick West

I have a narrow and very tall pantry space, i want to install a pull out pantry fixture. I am searching for an opinion regarding the fixed shelf i want to remove. I want to know if the fixed shelf in the pantry is structural or if it’s ok to remove. I want to install the following unit: https://www.renovatorstore.com.au/larder-pull-out-pantry-adjustable-height-internal-unit.html Evidence of qualification to provide this opinion is a must as well as VBA registration

I have a new under-bench dishwasher that needs installing. The cabinet width and height need adjusting by a few CM to fit the dishwasher. Ideally you can assist with installation of the dishwasher as well. Power and plumbing available in adjacent cabinets. Also looking for assistance in aligning some drawers.

I have 5 new solid core doors that need to be trimmed and fitted internally. I already have all the hardware and doors. Sooner the better! Please let me know if you need any additional information

We need to replace the wooden spire on our house prior to painting (urgent). The parts to be replaced are highlighted in red. The replacement can be a simplified version of the current design. Job is above a bay window. Seeking quality solution. Large bolt holding the existing spire in place.

I need 4 skirting boards cut to fit 3 internal corners. Preference is for coping rather than mitre. I can fit the boards, but i need the 45degree cuts and coping done accurately

Light sanding and re-apply oil to a wooden fence.

For additional storage we’d like a top shelf built in this cupboard! We he shelf diameters are ~65x66cm. Please see photos attached. Thanks

Items: Walls and roof of a large zincalume shed Two screen doors Wood from a large planter box Foxtel satellite Dead lawnmower Tin sheets Plywood Ten sqm of earth

I have a wardrobe that won't fit through my bedroom by a very small amount. I need someone to trim some timber off the bottom so that it will fit.

We need to remove scratches from floorboards. Scratches have already been sanded, but may need sanded more. Spot varnish/stain required to match existing stain/varnish

Looking for builder/ handyman to adjust ikea kitchen wall cabinets to ensure they are up to new building regulations. Wall cabinets have been hung, however they need to be raised 100mm to accommodate the distance from the stovetop to the rangehood hood. The oven needs to be raised or benchtop lowered (currently 940mm high) so oven can be higher than benchtop. Price is based on 6 hrs work, possible you could finish it sooner depending on experience with ikea kitchen rail system. Your own tools and knowledge required. Apologies if you've seen this before. Completion in July preferred. Thanks!

Source, cut and fit linoleum floor over existing floor. Space includes two rooms and one alcove in total measuring 4.1m x 9.2m.

I'm looking for a custom-made metal shed that is long and narrow, measuring 800 mm wide, ~6 meters long, and a maximum of 2.4 meters tall. The roof must have a slope along the longer side. A front standard door.

Hi Bryce, I recently posted a few tasks including a benchtop, a bespoke shed, etc. Is this something that falls in your range of expertise? The budget (20$) is for a site inspection in Brunswick West

Hello needing some quotes to finish this built in cabinet. Facing pieces need to be cut (all ply already bought) for only the top 3 shelves - soft curve to be cut. All joins filled with spackle, sanded, skirting and cornice to be cut and installed (dont have these pieces yet). Would like to include a secondary quote to paint them (primer for MDF already purchased) and sanding in between, likely 2 coats primer 2 coats paint (white, not yet purchased) and also caulking of seams.

Looking for builder/ handyman to adjust ikea kitchen wall cabinets to ensure they are up to new building regulations. Wall cabinets have been hung, however they need to be raised 100mm to accommodate the distance from the stovetop to the rangehood hood. The oven needs to be raised as well to be higher than the benchtop. Price is based on 6 hrs work, possible you could finish it sooner depending on experience with ikea kitchen rail system. Your own tools and knowledge required.

Need a small prefab Bunnings shed assembled from flat pack and installed, including bolting to existing concrete floor (anchor kit is supplied). Shed measures 2.25 x 1.52 x 1.81. The shed is being installed in my undercover car parking space (I’ve included a pic of a similar sized shed already installed, for reference), so will require someone that can provide an ABN invoice and has insurances in place.

Looking for builder/ handyman to complete ikea kitchen install. Rails are on walls and cabinets too, however need you to: - measure, cut, install cover panels - measure, cut, install benchtop - rangehood install - ensure cabinets flush/ aligned. Plumber is on standby for fit off once compete. Price is based on 10hrs work. I have tools but best you have your own especially jigsaw/circular saw. Ideal if experienced with ikea kitchens.

I’m looking for someone to build me a set of functional stairs for my loft bed. They’re for my dog (and myself) to use instead of the ladder the bed came with. The stairs would need to be 188cm high (same as bed height) with ideally, wide treads so it’s easier for my dog. I’ve included a few pictures of potential ideas. I like the idea of having a ‘landing’ as well which is one of the photos I’ve included. Or the top step could be wide to be a miniature landing. Open to ideas! Don’t necessarily need them to have storage space/drawers. And I’m not overly fussed on them being pretty, would rather they be functional!

This is about a job inspection only to obtain advice and binding quote for: staining my rooftop timber screening, the backyard slat fence and a standard paling fence. The screens were installed in August 2022 and January 2023, and they're overdue for their annual maintenance. The task involves washing away the faded old stain residue and applying three fresh coats of stain to both sides. Section A - Rooftop Timber Screening: Material: Treated pine Dimensions: 8.3m x 1.7m 7.5m x 0.7m Section B - Backyard Slat Fence: Material: Merbau Dimensions: 14.0m x 1.8m (excluding plinth) Section C - Standard Paling Fence: Material: Treated pine Dimensions: 28m x 1.8m (including plinth) For Section C, please advise if three coats are necessary. Additionally, please provide separate quotes for staining one side only and both sides. If the neighbour is interested in sharing the cost, I'll opt for staining both sides. Supplies Provided: I already have the following products: 4L Sikkens Light Oak stain water-based - 2h drying time 2L UltraPrep Timber Cleaner Paint Tray Protective Sheets Some brushes and masks Additional Supplies You Might Need: You may require extra brushes or tools and additional protective sheets, depending on the specifics of the task. Safety Requirements: For painting the outside of the rooftop timber screening (Section A), a full-body harness, fall arrest system, and tie-off anchor strap (AS/NZS 1891.1) are necessary. The roof floor is only 3.5m from the ground floor, yet safety precautions are necessary. If you're interested in taking on this task, please provide a breakdown of costs for sections A, B, and C, considering that I may appoint you for all three or two depending on cost and timing. Please provide the anticipated job execution lead time for each section. Your expertise and attention to detail will be greatly appreciated!