Find experienced local carpenters in Bulimba

It’s a wooden show piece where a mask is glued onto a board and I need that separated. Either with a glue melter or someone gently scraping the mask off from the wooden board.

assist carpenter building bathroom laundry hanging doors, gates etc hourly rate below

Looking for someone to power wash and apply 2 coats of deck stain to a large back deck and 2 smaller front decks and an outdoor wooden table. Total area is about 70m2 (45m2 deck, 15m2 deck and 10m2 deck roughly) and furniture should be easy enough to move out the way round the side of the house

Hello I have 2 wardrobes and I would like to have some inserts inside. I have done a sketch of what I am after. Only the internal part is needed.

Install laundry cabinets and bench tops which have been ordered from AussieCut

We are looking for an experienced and professional individual capable of assembling and wall-mounting our Australian-made flat-pack cabinets on a plaster wall. The job can be done any time now and all necessary hardware is included. Easy-to-follow instructions will be provided. One cabinet needs to be installed on the ground level and another one on the first floor. White Cabinets - 2 off Length - 1.8M Height 33cm Depth -30cm Mounting kit included No metered parking Cabinet is similar to the one in the pic If you have any questions, please feel free to ask.

We need some more shelving added to some cupboards in our upstairs lounge room. We need a couple of additional shelves added to the right side of the cupboard and then half a dozen added to the left side cupboard. Let me know if you might be able to assist. We are based in Bulimba.

I have 3 pieces of acacia wood garden furniture - 2 chairs and a sofa) - that are in dire need of being sanded (sanding machine would be best) and varnished. It would probably take a few hours.

Quote to design and install a 7 x 5m TuffBlock deck including materials.

I am wanting a custom made outdoor- all weather 4 seater table made Black metal legs and a marble/concrete look top in a lighter white or grey. Open to materials for the top.

I m at work atm...but will take a photo & send it when i get home after 6pm...it s a small linen cabinet I bought...I had salt lamps on bottom shelf and they leaked . It's not a large space..it's 15inches x9inches.

It’s a wooden show piece where a mask is glued onto a board and I need that separated. Either with a glue melter or someone gently scraping the mask off from the wooden board.

I'm looking for a quote for supply and installation of three shelves in the pantry as shown in the photo. Please make an offer for the quote only, not for the full installation.

Looking for a Carpenter or Builder who can build a wall divider, paint and Gyprock. 6 m In height and 3 metres in length. Please provide tools and materials. Must bring photo of previous work please prior to task.

Hi there, I am looking for a carpenter to redo my staircase balustrade. I would like to change the posts, put in new spindles (plain square ones) and keep the original handrail wood of the staircase. I can pull apart the habdrail purchase the timber materials for the job, but need a carpenter to build the new one. First picture is what it currently looks like. Second is the inspiration for what I’m going for.

Easy bike shed needs to be assembled

Cut in sub floor and anchor, all tools and material provided, must have experience using saw and understand levelling and carpentry. Full day required

Require a timber structure (daybed) to be removed/demolished. Underneath is a timber floor which will require sanding and coating to match surrounding timber deck. Not sure what this would cost but happy for someone to come view and provide proper quotation for the work.

Installation of garden shed with below dimensions. Absco Sheds 2.26 x 0.78 x 1.95m Zincalume Single Door Space Saver Garden Shed

I would like a table that matches the width and height of our existing outdoor table so we can accommodate additional guests. The tabletop does not need to be pretty as it will be covered by a table cloth. It does need to be stable and comfortable to sit at. The table would need to be 100cm wide and 73.5cm to match our existing table, and 160cm long. The table can be folding or the legs could be easily removed/attached. Thanks so much :)