Find experienced local carpenters in Campbelltown SA

Shed Kit from Best Sheds. 6x4 skillion roof. 3.5m at highest end, Pa door and rollerdoor entry. Ready to be installed. Concrete has already been laid.

EasyShed 3 x 2.25 x 2.35 Zincalume Tall Gable Roof Garden Shed

Looking to build a dining bench seat in an L shape, approx size 2mx3.3m Similar to pic attached.

Hi Looking for someone to build an arch , approx 1m wide and 25 cm deep, ready to be gyprocked.

I'm seeking a licensed carpenter who can replace the current skirting boards in three bedrooms with new ones.

Hi Need 10 kitchen cupboard doors to be made in shaker style, this includes two new sets of drawers.

Quote to replace existing kitchen benchtops and tiles to be replaced with new benchtop and splashback.

I bought an ex-display laundry which includes; - White UV painted gloss doors and panels - Fully Assembled Cabinets, not flat pack. - 38mm Laminate benchtops (to be cut, joined and edged on site by installer) - Pushcatches - Sink & Tap - Hanging Rail - Due date: Needs to be done on Tuesday, 23 January 2024

Need a door modification ,need come have a inspection and quote - Due date: Flexible

Cabinetmake to fixed my tv unit - Due date: Before Friday, 21 July 2023

We ned our cubby house lowered to sit on top of the lower level - Due date: Flexible

I purchased an ezy shed online and the measurements are 3 meters deep by 6 meters wide by 2.4 meters high it comes in a kit form im looking for someone to be able to assemble and bolt to the footings which have already been laid. - Due date: Flexible

Women clothing store to be established inside Garage . Total area for garage is 40 sq meters . It is a double garage . Few photos attached . I am looking for a carpenter who can design the whole garage . It will be combination of mirror , shelves , fitted wardrobes. Floor plan attached . - Due date: Flexible

I have existing walk in robe (approx. 1.7m x 1.5m) I am after a handyman to supply and install built in robes with 2 hanging rodes, 2 cuboard and drawers units. The current hanging rode sits at 1.8m height so that needs to be removed and move to 2m height to allow additional hanging rode. would also need gypock patchup. area - newton - Due date: Flexible

I need to remove shed from 8 raymel cres and re-install it on 6 raymel cres, campbelltown. Shed approx 1.5m x 1.5m. No electricity connected with shed. I hope can be done a.s.a.p Main building will be demolish. So we move the shed - Due date: Before Wednesday, 11 January 2023

Hi there I’m needing someone to cut out and install a cat/doggy door in my wooden door. I can buy the cat door itself or if it is easier for you to buy it and install it I will pay for it Thank you - Due date: Flexible

Looking to get a space made for my dishwasher to be installed in my kitchen.

Needing: Cornice work done in the kitchen (8 corners around the cabinets) Skirting and an architrave around a cavity sliding door. Would love for this to be done all together but could work across a couple of days if needed. More details: Kitchen cornice work: We had cabinets installed a while a go and haven't gotten around to getting the cornice done. It is going around two/three walls but that includes a corner (45 degree) pantry and wrapping round to the old junction. (Bonus points if you're willing/able to finish/prep the plaster patch in the ceiling.) Study wall/door (cornice, skirting and architraves): We have a wooden feature wall between the dining room and the study. (The only non-brick wall in the house!) When we redid the kitchen we moved the door to that wall and I installed a cavity sliding door. (It's a little bit of a hack job in places but I was happy to get that much done.) I would like to get the skirting finished off along that wall (both sides) and the architraves installed. The slight complication of the architrave is that the wooden paneling is about 3-4mm thicker than gyprock would be so that gap will need to be filled (or otherwise worked out). I have skirting boards to match what in in the house. Study cornice: The cornice for that wall needs to be installed. After I pulled down the cornice to work on the wall some of the plaster was still in place. I'm assuming that will need to be cleaned off before the new bit can go up... For the cornice, I've still got the piece I pulled down from the study wall but it has a bit of a gouge out of it - not sure if that's worth reusing or just go with new material. I don't have cornice lengths for the kitchen yet. (Would probably prefer if you can supply it, but happy to try and source it myself if needed.) Not sure what a reasonable price is for all this, so send quotes, including what's included (materials etc). I'd love to get this done in the next week if possible. - Due date: Before Sunday, 20 March 2022

Concete base needed to level ground for a bunnings garden shed 1.51m x 0.77m - Due date: Flexible

Supply, stain and install (measure and cut etc) pine quarter rounds for 3 x bedrooms, living room and kitchen. - Due date: Before Friday, 4th Feb 2022