Find experienced local carpenters in Canterbury VIC

Looking to install a bank of cabinets in garage for storage, 2400mm high, 5-6m in length, circa 600mm deep, adjustable shelving, vinyl wrap doors to match other areas (can discuss). Will need to check measure, discuss some details etc. Image of similar cabinetry in different area is attached for visual reference (this one wont go all the way to ceiling, will have open space above. Ignore budget below, looking for quotes...

Hi, We are looking for someone to clean and stain our decking areas, and stain some surrounding fences. Some sanding may be necessary to prepare the wood. Deck 1 - 17.55 sqm Deck 2 - 26.20 sqm Fence/Shed - 50.31 sqm - Due date: Before Wednesday, 31 January 2024

I need help to cut away the bottom of laundry bench so our dryer will fit. Sorry the photo isnt great as we don’t live in the house yet. I think the wood under the dryer is slightly thinner than what you can see at the bottom of the cupboard Need someone this Friday afternoon. Or Saturday I have no idea of the cost so please provide your best quote (regardless of the amount I have chosen) - Due date: Needs to be done on Friday, 8 December 2023

We have a garage ramp that needs to be drilled down, as it is made of wood. A new sheet of wood might be required - Due date: Needs to be done on Saturday, 30 September 2023

We have a bedroom upstairs that is built into the roof space and has a partially angled ceiling. We are looking to extend the room further into the roof space, following the angled ceiling line. This will push ~1m into the roof space. The area along the existing wall and in the new extended portion is to be clad in VJ panels (https://www.easycraft.com.au/products/easyvj/). I have attached photos of the rear of the wall to be demolished. As it is partially load bearing, the roof rafters will need to be strengthened to cover the larger span. An additional doorway is to be plastered over, and anther opening to be constructed in a plaster wall in a separate area of the bedroom. See attached diagram for work to be completed. - Due date: Flexible

Temporary ramp required to push pram up/down two steps. - Due date: Flexible

Need a hand with skirting and architraves for one 1020 door and approx 6m skirting(small job ) - Due date: Needs to be done on Friday, 24 March 2023

Removal of old water heater inside a kitchen cupboard and construction of shelves inside - Due date: Flexible

I'm currently in the process of converting my office apartment from commercial to residential . It is zoned both. Part of this process requires the dismantling of built in timber desks/built in timber cupboards. This occurs in 6 offices which will become bedrooms etc. There is also an oak timber bar requiring dismantling. I have access to removalists, so this is not a removalist job. It is simply dismantling the furniture so that it can be subsequently removed. I will be responsible for the removal. As the built in desks have power-points, the job will require the assistance of an electrician. - Due date: Before Thursday, 15 December 2022

Our pool fence (glass) is on a lean and needs repair. A professional pool fence guy has come out to assess it, he's too busy to do the repairs though. The problem is that the timber decking (that the glass balustrades are screwed into) is not strong enough to take the weight of the glass, and are leaning over. The glass is ok, and is securely attached to the boards. It is the boards themselves that are leaning, they need more / stronger timber underneath the decking. It is a timber frame underneath. The pool fence guys assessment was that the glass balustrades (x4) need to be removed (they are simply screwed down), and 1 or 2 of the decking boards need to be removed, with more timber strengthening underneath. Then put the glass balustrades back where they were. For the purposes of this quote I am assuming no materials are needed (if materials are required, that will be at my cost). He has not provided a quote, but said it should be 2 people for half a day. This is what I have based my budget on, but happy for you to come and have a look and quote. I am happy to help, in which case the quote I assume will be lower. Please specify this in your quote (i.e. if you will bring 2 people, or if you will require my help) I am looking for someone with a professional building / carpentry background, ideally with pool decking experience. Please don't apply if you don't have this. The fence needs to be rock-solid after completion. - Due date: Flexible

Create a portable stage out of wood pallets, covered in black material or painted black. Ideal size 3x2m (approx.) Deliver to Canterbury 3126 DIY like this is fine: https://www.instructables.com/Pallet-Stage/ - Due date: Before Friday, 11 November 2022

Need an existing doorway (now closed off) plastered and new doorway plastered (square set). Includes adding one horizontal timber to ensure finished door height is 2200 (currently approx 2400). Require materials and labour. - Due date: Needs to be done on Thursday, 6 October 2022

We installed blackwood timber bench tops in our kitchen more than 30 years ago. We have arranged for a new kitchen to be installed and the design includes reusing the large section of the benchtop which is currently 208cm x 91cm x 3.5cm. We need someone to reduce the size of this piece slightly and refinish it. We would also like you to prepare the smaller pieces for a laundry bench and other items which are not urgent. At this stage the removal of the old kitchen is scheduled for 7th September 2022 and the new kitchen is scheduled to be completed on 16 September 2022. - Due date: Before Monday, 12 September 2022

I need an experienced carpenter to build a TV unit on a wall to accommodate a 55-inch TV over an electric fireplace. Measurement of the space is 3100mm (width), 2420mm (height) and 710mm (depth). Preferably finished within the next few weeks. Photo attached as an example. - Due date: Before Friday, 12 August 2022

Need cabinets to be done for office

3m x 1.5m garden shed assembly -EasyShed New in box with instructions. - Due date: Flexible

to build a cabinet that will be 40cm high 70 cm in depth and 2-3-2.4 long. As it has to sit a projector screen at that height and depth. Plain White or black. with 3 doors. - Due date: Flexible

Need someone to help cut and fit a wooden plank so it fills a gap between the carpet and the bottom of stair rail. Would need to be flush so there is no crack between plank and floor. Dimensions: 1.75m x 0.065 x 0.02 Tasker to bring wood, tools and glue.

We need four standard size internal doors cut down to 2010 mm x 765mm to fit our door frames. Job includes: - removing old doors, taking them outside the back of our place for disposal - installing new cut-down doors with new door knobs, latches and strikes We’ll provide the doors and hardware. You bring the tools.

Hi, I would appreciate if someone have carpentry skill or experience in custom made furniture to fix my table- I would like the length to be shorten, if you can do it at the pointed location. Please contact me for more detail. Your quotation is welcomed! Victoria - Due date: Flexible