Find experienced local carpenters in Clayton VIC

I need a carpenter to construct a wall and install a door jam and a door to my dining room, to separate it from the living room 2.8Wx2.7H 4.8Wx2.7H Just separate the dining and living areas of the house Just need to build a stud wall, door jam and a door Please quote

Installation of three doors. One is bifold. One is sliding in cavity and one normal external doors

install ikea pax corner wardrobe (3.6m x 2.4m + .5m X 2.4m L shape) and build bulkboard on top to seal to the roof height (2.7m) 4 sliding doors (2 seperate sliders with 2 doors in each)

Need shelves on the wall, no materials and parts supplied. Just need something practical but sturdy to hold garden tools and other things above 5kg in weight

This quote is to 1. Bring the tools needed. 2. Build frame needed underneath 3. lay the decking. 4. Inputs on the amount of material needed and timing. Please look at the pictures for dimensions and look. All the material will be supplied as per discuss. Planning to have composite decking.

Carpenter. I need floor, door and skirting work

I need someone to repair skirting board for a fridge space area.

As shown on the pictures, there is a gap between the sink/kitchen benchtop and the wall. One side of the benchtop sunk a little bit as shown on the picture which created a little gap between the benchtop and the wall. Task required: 1. Push up and support benchtop where it has sunk to even level. 2. Please remove the old silicon seal and re-apply new ones.

I have a room in my home that currently has no door and no door frame, and I need a skilled person to install a door and door frame in this location, matching the style of existing doors. Job Details: The space is approximately 2400mm heigh, 900mm width and 120mm deep. Install a door frame and a door in a room with no existing door or frame. Ensure proper alignment and smooth operation of the door. Match the new door to the existing style of other doors in the house. Clean up of any debris or materials after the job is complete.

I've almost finished but need a hand. Gazebo is 2.7m x 3.9m. Just need to nail in the rest of the cross batons to hold up the roofing sheets (polycarbonate roofing). Then paint it. Then screw in the polycarbonate roofing sheets. Should take 2 days

Hi can we pls get help in installing shelves and putting a moulding and patching up a small timber floor .

I will be getting new floorboards installed in my apartment and need to have the bottom of 2 bedroom doors trimmed by around 1cm. Apartment is on the first floor with one flight of stairs. Visitor parking is available on the complex. There's no furniture in the apartment so the work can be done in the living room area.

The old concretepost post box which has damaged. The top part is still usable. Need a help to be removed. The top part of the current box can be easily removed. as you can see in the attached photo. replaced with new one. I will provide the post box - Due date: Flexible

I am looking for someone to build some walls for my stall at waverley antique bazaar. The wall panels will need to be built in sections offsite as we are not allowed to construct them in the store. They can then be assembled together Instore and dynabolted to the concrete floor. I just need the timber frames no paneling just the frames 2.5 x 3m is the stall size Wall height I would like is 2.4m Looking for someone to install these by Friday at the latest. Store is open 10-5 so installation can only been done during those hours - Due date: Needs to be done on Wednesday, 6 December 2023

Asphalt is currently blocking storage containers from being removed, needs to be cut back. The area needing to be cut is roughly 10 meters in width, 1 meter length and 10 cm deep - Due date: Before Friday, 17 November 2023

We need to remove skirting boards upstairs where our closets are going to be installed. We have tried in one corner, though are worried about structural damage. - Due date: Needs to be done on Monday, 4 September 2023

Aluminium shed in front garden needs to be taken apart. - Due date: Flexible

- Install 3 x 2m bedroom wardrobes with sliding doors and internal fittings/shelving. - design code M7B29Y - cutaway skirting board portion to fit wardrobes snug - cardboard removal - ceiling height 2400mm Due date: Flexible

full restoration of 2 iron metal seat/bench l- including stripping, priming and painting. Paint and material are not supplied. - Due date: Flexible

old weatherboard house need to replace and repair rotten boards. - Due date: Flexible