Find experienced local carpenters in Donvale

Light sand and recoat deck/stairs/benches with Cutek oil. Oil to be provided.

The wooden to-do list holder is designed to fit 3"x5" cards. It has a minimalist, rectangular shape with smooth edges and a natural wood finish, likely walnut or a similar hardwood. The holder includes a front slot to keep the cards standing upright at a slight backward angle for easy viewing. Key details: Dimensions: The holder should fit 3"x5" cards comfortably, with enough depth to hold a substantial stack of them. Design: The front slot is angled for visibility, with a backstop to secure the cards in place without them slipping out. Finish: The wood should be finely sanded and polished, possibly with a clear coat or oil for a smooth, durable finish. This simple and functional design provides an organized way to display daily to-do list cards, combining aesthetics with practicality.

Need a quote for a carport on side of house.

Installation of 6x3 easyshed. Onto concrete slab with rebated edges. Ready for job completion. Slab measurement as per easyshed guidelines in photo.

It’s a build that I’m finishing off need some things fixed some flashing done an walls built an a roller door to put up also also payment for work will be a day rate discussed on your ability to do the job thankyou

I have a heap of leftover stuff from a carport build Framing timber Treated pine sleepers Blue board Colourbond sheets Would like a potting shed built

Make and install additional kitchen cabinets in my kitchen.

We have an existing chook shed (a cubby house converted to a chook shed) and would like to add a 2m x 2m run for chickens to the side of this. Preferably would like the height to be able to walk in and a door to access. I don't have any existing material and would like to include material as part of the cost.

Building a new deck and need some help

Clean, sand and stain 2 x decks and rails. 1. 6m x 6.6m plus railing 2. 3m x 3m plus pergola

I have a two car garage with shelves that needs to be cleared and organised, so i can use it to repair motorbikes. In addition, I would like wooden panels to be attached to one side and rear of my 3 x 6m garden shed (dimensions 2m x 6m on side and 3m x 2m on rear)so it can have attachments to hold gardening equipment and for storage. I have 8 x 3mm plywood boards to be attached to the garden shed. You will need to attach, then organise both sheds.

I want to restore this letterbox my mum and I built when I was a kid. Needs rotten areas replaced with new wood and repainted same colour.

6 x 3 shed installation onto a concrete slab.

Subfloor Creaking when you walk over it. Room has a carpet Finish. As the house is up for sale we need the creaking fixed asap. BYO Tools and materials

We are wanting a 1.5m x 3m chook shed to replace our existing one. Preferably a walk-in or at least 1.5m tall. Including nesting box.

Outdoor decking roofing needs to be unscrewed and sisalation installed and then roof sheets reinstalled. Insualted sisalation will be supplied, after a roofer to efficiently carry out the task.

I need a small interior wall in the master ensuite to fit a robe in it. Please refer to plans, the wall needs to be next the entry door to the master ensuite . I have put a red line where Wall needs to go. Wall depth 600mm X 2400 mm high and around 100mm wide. including cornices. I have added a photo of similar robe in other room.

Small chip about a finger nail wide. Kitchen stone bench, white. Repair needed. You must provide proof of experience.

I’ve got an Easy Shed 3x3 shed that I need assembly to be finished. I’ve assembled the rear wall, 2 side walls and 2 roof panels. So all that’s remaining is the front panel and doors assembly (Swinging, not sliding). The the parts needs to be screwed together and secure the shed in place to the concrete slab (already poured). All parts are supplied with the kid and the instructions are easy to follow, but I’ve hurt my back and can’t finish it. It will require 2 people to handle the panels. Any questions, feel free to ask!

I am looking to get my outdoor deck enclosed, do we have someone who does outdoor glass etc