Find experienced local carpenters in East Brisbane

Need to hand to hardwood doors and cut in lock assembly, I'm simple to rough to do it all materials provided need to be neat, so I'm looking for skilled work

I want to remove Skirting Board in my entrance to install cabinet. this skirting board is bit tricky because the skirting board is all the way down to floor. If you have a tool and skill, it should be easy. Skirting board length is 100cm

Supply and install an aluminium garden gate along the side of the house, between the block wall and weatherboards. Style - flat top in woodland grey. See images for location and gate specs. Width of gap is 950mm no need for pool latch just a standard gate latch. I'm not sure what additional information may be required. Ask questions, and I'll tell you what I know. Update::: I’ve added a pic of a gate that is available from Bunnings. I will also check the width and confirm the height required. I will also take a photo of the fencing above the wall, which is should match.

Currently my clothes cabinet in my room has normal doors which take up a lot of space. I would like to change these to sliding doors and need a quote. It’s a wooden frame with the following measurement’s It has the middle brace and I’m not sure if that can be removed if it is holding up the top shelf. Height: 2350mm Width: 2340mm Depth: 90mm

Assembly of Absco Shed with sliding door 1.52W x 0.85D x 1.95H Purchased new from Bunnings

Hi, I am just chasing something someone to put together an “off the wall” garden shed. The shed is to be fixed to my garage brick wall. This is the model: https://easyshed.com.au/products/otw-garden-shed-3m-w-x-0-78m-d-classic?_pos=1&_fid=15a1646ba&_ss=c I have purchased the concrete fittings, per the website. Photos attached, of the shed, and where it is to be attached. Thanks.

2 x Non-load-bearing walls to be taken down and removed. 1 x temporary timber rack system used for art strorage. 1 is approx 1mtr x 2mtrs. 1 is approx 1.8mtr x 2.5mtrs. Rack system is roughly put together timber pieces. The walls are NOT attached to the floor. They are sitting on the floor. The smaller one is held by 2 timber braces at the top. The larger one is held by a timber strut attached to wall and one timber brace at the top. The walls are made from pine timber beams and gyprock panel. I need it all take down and removed in one day. With the right tools - maybe take 2 - 3hrs to dismantle. I can assist and be on hand with support. I HAVE A TALL LADDER ON SITE TO ASSIST. SEE THE RED-CIRCLED AREAS IN THE PHOTOS. Thank you

I’ve purchased ikea laminate benchtops and need my current benchtop removed and replaced with the new ones.

I have a rotten decking board that needs cutting out about 1200mm and replacing. There may be a need for a second board replaced - need for this can be discussed and agreed at the time. I have the replacement board. Access straightforward. To get under neath you will need a step ladder - I have a suitable extendable ladder. For clarity- it is not high. I will be available onsite to assist. - Due date: Needs to be done on Friday, 22 December 2023

Hanging or barn door in timber and clear glass. Lockable from either side. Refer to photos to see existing internal doors to match. Approx measurements: Doorway: H 2200, W 1180 Wall space available for slide: W 1300 Open to suggestions for how best to fit this space. Would like completed ASAP. - Due date: Flexible

I need a carpenter to help renovate a Queenslander. All aspects of carpentry. - Due date: Flexible

Need more cupboard space. Cupboard can be extended, include plain or mirrored sliding doors - Due date: Flexible

I’ve taken over a restaurant which has existing stainless steel benches. I need a section cut out of it, and the cuts capped so they’re staff/food safe. The section to be removed I would like to use in another area of the kitchen. I’ve attached a couple of pictures for reference, let me know. Located in east Brisbane.

Extend built in wardrobe - need more space to hang clothing. Cut existing bedroom wall and fit sliding mirrored doors. Send me a quote for labour. Will pay for materials (doors, paint etc). - Due date: Flexible

Need help with building an interior partition wall about 1500mm high and 2000mm long x 300mm width Plus sheeting done for the job No need for painting Thank you - Due date: Before Sunday, 17 September 2023

Build custom made high quality, minimalist or simple design shoe rack 100 cmx 100 cm x 20 cm of oak finish. The timber and materials are to be purchased at my expense after your recommendations. Due date: Flexible

Looking to get quotes on putting a subfloor into a van. Plans have been drawn up. Just don't have the tools to do the job. Simple job: 2x 2400 x 1200mm 12mm Plywood, cut to shape with a jigsaw. 4x mounting brackets screwed into the floor. Location east Brisbane. - Due date: Flexible

Replace edge banding on kitchen cabinets, install small push door on exposed shelf, install overhead cupboard in laundry. $500 cost includes labour plus required materials. - Due date: Needs to be done on Monday, 8 May 2023

Build a lattice screen with frame, to fill one end of a verandah. Basic carpentry skills, drop saw etc...approx. 3m x 3.5m. Easy access & work area, no ladders, finlayson timber supplies down the road. Measure,cut, frame & mount. Poll one side & house the other, wood mount screws. $750 LABOR not including parts. - Due date: Flexible

6.6 x 3m deck Sanded and sealed (would like to talk through best option) - Due date: Flexible