Find experienced local carpenters in Eltham North

Apply 2 coats of an oil based stain to a Merbau decking of a pergola. Decking is approx 6x6M with a seating area 1x1x4M Decking in pretty good condition I will supply oil to match current oil stain (Feast Watson Decking Oil) Can also supply paint brushes etc if needed (Other staining work of pergola available if interested )

Cut off and cap 2 power points prior to a wall being built. Return in a few weeks under a new job to reinstate with other works.

I have 5 composite panels I need cut down to size and installed on the sides of an outdoor staircase. I attached the photo to show the positions they need to be placed in. The left hand side panel does not need cutting down.

Looking for a Carpenter, chippie, handyman We have purchased 2 new glass doors. 2340 by 820 Please install for us in Eltham

We have a deck about 4 years old, it’s very small and is outside a shed summer house. It has three steps leading up to also needed sanding and staining. Need it sanded back and restained existing colour as it is starting to look worn. Eltham, cheers

Have a small timber deck approx 6 metres long and 1m wide, and 2 small steps that needs sanding and staining. Hasn’t been stained before. 2 coats of stain. I will provide the stain/paint.

Need certified qualified plumber to help install Scandia Warmbrite 200 Series 4 Indoor Wood Heater. Flue kit supplied. Price is for guidance only and is not intended to be unreasonable. Happy to negotiate fair pay. Required installation is on the first floor. Need advice if can be done in ground floor too. Split level home with entry into first floor. Home splits into two stories at the back. Property under construction with plumbing rough-ins being completed.

I need three timber decks prepped (where needed) and stairs stained with good quality oil. 1. 220x137 2. 510x180 3. 310x180 + 4 steps 200x32 4. 4 steps 130x100 Labour only quotes please

Needing a handy man carpenter or chippy that can put cladding around my elevated deck 1. Side one - 3.2 meters by 1.4meters 2. Side 2 - 2 meters by 1.4 meters We are using 4.5mls thick cement sheet from bunning to make for an easier job, lighter. We will supply screws and what is needed. Location eltgam - Due date: Before Saturday, 9 March 2024

Carpenter, chippie, handy man install exterior cladding paneling to my deck Frame stumps need to be packed out also to be flush. The one merbau timber board will be removed by us The line in green indicated the area needing cladding We have built a pool 70cm lower than our top deck and there is a gap between the 2 decks. We would like it cladded with exterior VJ panelling. We can purchase this ourselves. The length is 7 meters long by 700mm high. There are other jibes that need to be done at our home and you can take a look once assigned, cheers. We are in Eltham north. - Due date: Flexible

I’m buying a garden shed and I would like someone to install it - Due date: Before Monday, 18 December 2023

We have some cabinetry that we need to update to change the colour of the panels. We are wanting to get rid of the timber look Melamine cabinets, in our bar area and replace the carcasses with white Melamine and the door/ drawer fronts with two pack. The current base cabinets where the drawers are (including the drawers) as well as the skinny cabinet to the right are already white melamine - these can all be reused. We would also like to close in the open section on the top left with either a fold down door, or a left side hinged door. Overall height is 1055mm and overall width approx 1470mm (700mm drawer unit, 570mm full door and 200mm skinny cupboard on left). - Due date: Flexible

1. Table tops are 1.5 mts long by 80 cm wide Bases need to be attached (need base of tables to be pre drilled and then attach steel base - 1 per table) 2. Acrylic board 2.4 mtrs x 1mtr to be installed on a plaster wall with Stand Off Fixings supplied. - Due date: Flexible

Carpenter Chippie Handyman I have 3 Small VJ easy craft panels to be cut to size 85cm high to fit the length on 2.85 meter under bench To be glued on. We are in Eltham north - Due date: before this Saturday

I need cabinets in my clothes cupboard. I have 2 cupboards in total.

Cut back existing plasterboard around air conditioning unit and install insulation to the wall (3.5m wide, 2.45m high). Add framing as required to joints and install plasterboard. Finish joints. Close off a wall opening (450/400mm, two wall sides) with plasterboard, including framing as required and finishing of joints. Materials will be provided. - Due date: Needs to be done on Saturday, 9 July 2022

I have an existing outdoor shed 2.7m (W) x 4.3m (L) x 2.5m (H) with metal sheet walls. Job is to remove the exterior sheeting and replace with weather proof external lining & match boarding. Also ensure roof is weather / water tight - extend out as required. Also need to line internal walls. I have double doors to go on front and a couple of framed windows to be installed in the shed. Job is to include labor and materials except doors and windows which I have. Easy access and power close by. Shed will be empty for when work is commenced.

Truss roof garden shed 4.5m wide by 3m depth by 2.10m high.

Repair MDF 2-pac vanity door

I need someone to come out and help us with our kitchen renovation. Located eltham