Find experienced local carpenters in Flagstaff Hill

We are looking to replace our current fridge but the height of the enclose is too low (174cm). We want to reduce the height of the above fridge cabinet (60 X 49cm) by around 15cm so we can purchase taller fridges. Don’t mind if we cut the doors cleanly along the lower border i.e. so there will be a cut line extending from the insert paneling passing horizontally across the border at this point (artists impression added as last picture to illustrate).

Assemble a new garden shed on a concrete slab. Shed is approximately 2mx2mx2m.

Remove old kick boards and replace with kickboard colour that matches kitchen cabinets. 170-200mm height of kickboard varies in different sections. Approx. 4.5m in length

Sanding deck, stain and polish deck

remove slabs and stairs, install decking

We have an existing deck that we are putting a spa on. We have an engineer report recommending a support beam and two columns be added, in addition to upgrading deck floor joists. Full engineer report available on request as it can't be uploaded on airtasker. Single page with recommendations has been uploaded. - Due date: Before Saturday, 13 January 2024

Part of a built in robe to re located to another room - Due date: Flexible

Table top to be replaced for bench outside Needs to be sun protected and match in with current setup. Dimensions 2.37x62 - Due date: Flexible

All the doors, skirting boards,architraves door stops are stained wood color. I require them to be painted white i need a quote. there are 8 doors and frames and architraves. +skirting boards in 5 rooms. You Will need too see job b4 quote . lots to be done - Due date: Flexible

A new corner hinge needed and skirting boards need re glueing - Due date: Flexible

Garden shed 2.91m x 2.87m x 1.90m - Due date: Flexible

Disemmble shed and reassemble after garden renovation - Due date: Before Tuesday, 17 January 2023

Deck needs re stained or painted - Due date: Flexible

I need the most basic holes cut but I need someone with the tools. Please only contact me if you have any skills in this profession. 15 mins work max

After someone who can base prep the new shed I’ve had installed, it’s already on a pad but the shed had to be lifted so more base is needed to fill it up. Only 10sqm a 3.1x3.1 shed. Not a huge job but after someone who done this before and will do the job correctly. I’m waiting the new fill to come up to the shed so all gaps underneath are filled etc Wanting this done ASAP

30sq of merbau deck. Needs to be gurneyed, cleaned and stained. Will provide all materials. Thanks

Hi, I need someone to cut out VJ pannelling and secure to the wall in between two ikea cabinets that need to be secured to the wall. One ikea cabinet needs to be wall mounted up high, VJ pannelling in the middle and the bottom ikea cabinet secured too. Mud room style. Please quote on price. I will supply the VJ pannelling. Thanks

Tall Gable Roof Garden Shed 3.00m (w) x 3.00m (d) x 2.40m (h) in Colour Specifications Model ETG-D3030 Shed Type Gable, Tall Door Dimensions 3.00m (w) x 3.00m (d) x 2.40m (h) Door Position 1.50m Hinged double doors on (w) Material 0.35mm High Tensile Steel Warranty Lifetime Assembly Self assembly, comes flat-packed Matching Skylight SKU ASKY-1600 https://www.easyshed.com.au/5-step-assembly https://zacsgarden.com/how-to-build-a-shed/popular-shed-foundations-reviewed/pavers/#t-1597586687003 ** Builder preferred or someone who has done this before. Job is ready to go! The basic Scope is as follows: - Put together new shed (5-step-assembly video given) - Dig a base and make sure ground is level enough to lay a base for the concrete pavers 500mm x 500mm (follow instructions given above) **Note: A compactor is required- can be hired. The base needs to be stable to hold the cement pavers and prevent slipping. - Steel pin shed corners down. - Clean up after. Workmanship needs a 10-year warranty. Owner has purchased new shed. Person assembling to supply all tools, labour and ALL other materials (excludes shed). I have purchased the Bolt Down Kit, which comes with a door ramp. (I was told that their recommendation is that it will need to be bolted into the cement blocks.) Please note: Payment will be made through Airtasker, once shed is erected, satsifactorily. Airtasker to release the funds.

DETAILS **P.N.- I posted this but have had other issues to deal with, so apologies! Tall Gable Roof Garden Shed 3.00m (w) x 3.00m (d) x 2.40m (h) in Colour Specifications Model ETG-D3030 Shed Type Gable, Tall Door Dimensions 3.00m (w) x 3.00m (d) x 2.40m (h) Door Position 1.50m Hinged double doors on (w) Material 0.35mm High Tensile Steel Warranty Lifetime Assembly Self assembly, comes flat-packed Matching Skylight SKU ASKY-1600 https://www.easyshed.com.au/5-step-assembly https://zacsgarden.com/how-to-build-a-shed/popular-shed-foundations-reviewed/pavers/#t-1597586687003 ** Builder preferred/handyman, who has done this before. Job is ready to go! The basic Scope is as follows: - Put together new shed (5-step-assembly video given) - Dig a base and make sure ground is level enough to lay a base for the concrete pavers 500mm x 500mm (follow instructions given above) **Note: A compactor is required- can be hired. The base needs to be stable to hold the cement pavers and prevent slipping. - Steel pin shed corners down. - Clean up after. Workmanship needs a 10-year warranty. The owner has purchased a new shed. The person assembling to supply all tools, labor, and all other materials (excludes shed). I have purchased the Bolt Down Kit, which comes with a door ramp. (I was told that their recommendation is that it will need to be bolted into the cement blocks.) Ilona H.POSTER There is access from a leveled front paved area. There is a slight slope at the front yard, to get to the side of the home, along the paved area. I'd appreciate a response if possible today, to get it booked in. Thank you. Ilona H.POSTER Hi. EASY shed state, "5 easy steps." I am sending a photo of the land where the shed will be assembled, as Airtasker has stated, "sharing personal information- insurance won't apply." Then please make an offer from that photo. It needs about one and a half X 3 meters to be dug out on the most further side, with dirt taken out to be used to 'backfill the closest area, to level it. (check link to see depth...it's not deep) The land is gently undulating. The 2 thin trees in the middle, pictured, need to be removed. I have weed killer to apply. The time scheduled to do this task, has been given in the task outlined. I suggest Googling the shed to see what it looks like as well as clicking on the links given, to see what is involved. I have noted people. who already have the experience from ratings given, which helps to inform and move forward with making my decision. Much appreciated for the time given.

Tall Gable Roof Garden Shed 3.00m (w) x 3.00m (d) x 2.40m (h) in Colour Specifications Model ETG-D3030 Shed Type Gable, Tall Door Dimensions 3.00m (w) x 3.00m (d) x 2.40m (h) Door Position 1.50m Hinged double doors on (w) Material 0.35mm High Tensile Steel Warranty Lifetime Assembly Self assembly, comes flat-packed Matching Skylight SKU ASKY-1600 https://www.easyshed.com.au/5-step-assembly https://zacsgarden.com/how-to-build-a-shed/popular-shed-foundations-reviewed/pavers/#t-1597586687003 ** Builder preferred/handyman, who has done this before. Job is ready to go! The basic Scope is as follows: - Put together new shed (5-step-assembly video given) - Dig a base and make sure ground is level enough to lay a base for the concrete pavers 500mm x 500mm (follow instructions given above) **Note: A compactor is required- can be hired. The base needs to be stable to hold the cement pavers and prevent slipping. - Steel pin shed corners down. - Clean up after. Workmanship needs a 10-year warranty. The owner has purchased a new shed. The person assembling to supply all tools, labor, and all other materials (excludes shed). I have purchased the Bolt Down Kit, which comes with a door ramp. (I was told that their recommendation is that it will need to be bolted into the cement blocks.)