Find experienced local carpenters in Forestville NSW

Work required: 1) Cut 1m into the concrete barricade to make an entrance for the stairs. 2) Build one 3.4m high platform as a landing to join the two stair stingers together 1m² 3) Secure two sets of 3.4m high stairs one end secured into the concrete wall the other to the platform, the next set of stairs goes from the platform to the ground with a concrete base 4) Build a cost effective safe railing for stairs, platform and 3m section above the concrete wall. Notes: We are looking for a cost effective option that will last and be safe for kids but it doesn't have to look amazing 6.8m height 12.5 bal area Located in Forestville There is a solid rock cliff that drops vertically down (see pics) We have approval for stairs but they were more complicated so looking to simplify and reduce cost as much as possible which means we will need to amend the council plans before starting

Quote to supply and install sheeting under beams of elevated outdoor room. Approx size 5mx4.7m, some of this area to be excl due to angle. Must be able to fit neatly to structural timber beams but ALSO to solid steel framing around the surround/edge. Work around couple of electric cables. Needs to be qualified/experienced chippie.

Construction of a Temple and Webster Callix wooden side console, 140cm×40×82cm. Needs legs to be constructed & attached to table top. Suggest BYO tools.

Looking for someone to sand back and stain a small dining timber table. Surface and leg. The preference is to have it brought back to original colour (similar to the leg - oak). The surface is too orange. I’d also be happy with the whole surface and leg going darker. Keen to remove the orange look from the surface.

Construct and bolt down into prepaid concrete slab Absco Shed2.26 x 1.52 x 1.95m Premier Single Door Garden Shed Add door knob and rosette hardware to front door

I need the bottom of 5 interior doors trimmed as they are rubbing against the carpet (about 5mm).

Assisting carpenter with decking

I need to replace 2 x steps from an external wooden staircase. The edges of the old steps have begun to rot and are no longer safe. I have the old step pieces as templates and just need 2 new steps formed of the exact same size and shape (which I can then fit). This will probably require someone to laminate together some smaller pieces of wood to form the required steps. The original steps were made of merbau (and so replacement in merbau would be preferred) but as the steps will be stained then a similar toned replacement wood should be OK.

Need someone to build a easyshed 1.5m x 3m Skillion Roof Shed on gravel

Rate negotiable pending experience- Looking for a carpenter or apprentice for this coming Saturday 16/12th to help install some timber screens- easy work. Basic cordless tools required. Offer is hourly rate. Full days work 730 am start. Don’t accept if you’re not reliable and available for the whole day, payment on day - Due date: Needs to be done on Saturday, 16 December 2023

We need a timber screen installed on decking rail. One each of : 1700 x 810 Timber slat are 65mm width slats - Due date: Flexible

I need a handyman to relocate existing magazine shelves from one part of the store to another. Must have some idea of how Slatwall shelving works. - Due date: Flexible - Due date: Before Saturday, 18 November 2023

Need to build a few brick garden beds, an seating in the corner. Footing may be required . If possible come to give a quote first .fotos attached for inspiration Height of back wall around 1m top tier 50cm bottom tier Height of wall behind seat around 75cm Height of wall on the left around 50cm - Due date: Flexible

Looking for a qualified carpenter with tools to help with remedial building works - Due date: Flexible

Need to plant on to the bottom of 2 x doors due to moisture damage. 2-3 hrs work. - Due date: Before Friday, 9 June 2023

I'm in Forestville and need help putting up five shelves, four in the bedroom and one in the bathroom. I have purchased the timber, it's already cut to the right size (hardwood acacia) and I have the brackets. I also have a drill, bits and hardwood screws. The wall is gyprock so I would need you to have a stud-finder, and be experienced in installing strong, perfectly level shelving. Perfect horizontal and vertical alignment is essential. For your reference, here are the panels and brackets: https://www.bunnings.com.au/2200-x-600-x-26mm-acacia-solid-oiled-hardwood-project-panel_p8330032 https://www.bunnings.com.au/carinya-200-x-250-x-25-x-6mm-heavy-duty-manhattan-angle-bracket-single-black_p3961579 - Due date: Before Monday, 6 March 2023

General house maintenance needed, including rehanging an internal door, adding some skirting boards, small carpentry jobs both internal and external, replacing fence palings, hand railing etc. Must have the carpentry skills, necessary tools, own transport and be very reliable. Happy to pay by the hour as long as you are efficient. - Due date: Flexible

Carpentry work: Replace timber at eaves in both sides of the house (approx. 20 running metres of timber) - see pictures. Must provide material / include in offer - Due date: Flexible

I want to do paving and cover under granny storage - Due date: Flexible

I have two exterior doors that need carpentry work. The bottom frame of one exterior timber door has rotted and needs replacing or repairing. The door is the non-sliding part of a pair of sliding doors - see last 3 photos. The other repair needed is the bottom sill of external doors, shown in first three photos. - Due date: Flexible