Find experienced local carpenters in Fortitude Valley

Have a S built in storage area that needs a door to be supplied and fitted if possible. Rough measurements below: Height: 2201 Width: 785

I bought a skytta system from Ikea to divide a room…the guy I got didn’t follow the instructions and completely botched it…its basically two rails, one on the floor one on the ceiling, with two fixed panels and two sliders…probably needs to be seen to understand but I will attach photos….looking for inventive carpentry skills and happy to pay for it.

A cupboard to cover laundry area Composite decking 3x3 m area

****Many have asked for photos. Can supply on Wednesday but really see very little value to a photo of a gap between the floor skirting and the edge of a floating floor. As for the length required we have not measured was hoping for someone who could show up measure then quote…. Again we will measure the total lengths on Wednesday 25/9 to supply more info***. We have laid floating floors and need a handyman to supply and fit the finishing trims over the expansion gaps at the wall. 1 bedroom apartment.

Requiring someone to install roughly 30sqm of 6mm villa board in a bathroom. Ready to be retiled. Demo and floor will be done before install is required. However opened to price to cover the lot.

Hi, I need some wooden panels cut to cover the gaps at the bottom of the outdoor area panels I have to keep my dog from escaping. Pieces to be drilled and fitted together and secured. Can provide measurements.

I need to replace quick step timber flooring in fortitude valley due to cat urine.

I need some scratches repaired to a door frame. They are quite deep, so it may require removal of existing skirting around the frame and putting a new one on. Open to having it patched if this is a cheaper/easier alternative, as long as it will look clean once painted over. I do not require painting, I can do this myself once the damage is repaired.

We have a pre-existing space where old dishwasher was. We need space heightened by 45.5mms. See attached photos of space. Our new appliance is a Fisher and Paykel dishdrawer but slightly taller than old one. ASAP job required. Old dishwasher: Height: 410mm - Width: 599mm - Depth: 573mm New dishwasher: Height: 454 mm - Width: 599 mm - Depth: 573 mm Top of unit to floor = 700mm Top of unit to top of ‘white’ = 590mm Width = 595mm Depth = 560mm

Installation of 150mm feathered edge skirting with contact adhesive. Skirting and adhesive supplied. Room is 4900mmx4075mm. No need for cutting internal or external corners as skirting will sit flush when bent. There are 2 doors so skirting will need to be cut. Preferably this afternoon if possible.

Sand and smooth corners of Teak bench top . Paint the metal Frame of the bench seat Do not paint Teak bench top. Put the bench seat together/assemble

I need a kitchen drawer shortened in the back.

I have an old mirror to be taken down (presumably attached to tiles via liquid nails). mirror can be broken if required then, a new cabinet to be picked up from Newstead Bunnings, and installed to wall. wall to be attached to is tiles on gyprock. the lights and power point have been removed already

See photos. This “wall” has been installed and as you can see it is awful. It needs to be installed properly. This wall is just for privacy reasons it is not structural, our tenant simply needs to be able to shut a door. Not sure of the ballpark cost for this, please offer. - Due date: Before Friday, 12 January 2024

I will need cafe table top. Need to have quote

1. I have two tall pax wardrobes to be installed into two bedrooms, each 1500mm wide, plus a Billy bookcase with doors into the dining area. They all need to be built in so the skirting & picture rail need to be removed to allow them to sit flush to the wall. 2. I have an 15 year old ikea kitchen I’d like to fit 3 new doors + 4 drawer fronts + 2 cover panels (enkoping style) 3. Fit 2x new door fronts to a bathroom vanity (enjoying style) Note - the kitchen & bathroom doors will likely require new holes to be cut into the doors as ikea changed the system so they won’t just click into place.

Carpenter/Handyman required to assist a team with a showroom fitout. Building of walls, installing of fixturing/shelving onto walls. Miscellaneous other build requirements. rate offered/advertised is per hour. Own tools required

Assembly of an Easy Shed bike shed in our parking spot in the garage. Tools will be required and it recommends 2 people please see photo. Does not need to be attached to the ground. Needs to get done as soon as possible. - Due date: Flexible

See photos. We need a form of partition/wall installed here, with a door. There are wooden doors onsite, we can use one of those. Other materials you will need to supply. We are looking for a simple, cost efficient solution. Nothing too fancy, permanence is not an issue either as we will knock down these offices later in the year. Please provide a quote- happy to adjust this as needed to supply materials. THIS DOES NOT NEED TO BE A PLASTERBOARD WALL - ANY FORM OF PARTITION THAT A DOOR CAN BE ATTACHED TO IS FINE - Due date: Before Friday, 12 January 2024

There are three timber box seats that have deteriorated and can no longer be used. I need them removed. They are free standing (ie. not attached to the wall or floor). They are each approx. 2m x 50cm x 50cm. They are in the courtyard of an office tenancy in Fortitude Valley. - Due date: Before Friday, 5 January 2024