Find experienced local carpenters in Geebung

Require 3 timber box seats for outdoor areas. 1 x 5m 1 x 3.5m and 1 x 2,5m. All with hinge tops for storage inside. Will be eventually painted so any suitable wood ok.

I have two gable ends that need re-sheeting. They had decorative timber that was rotted and I have removed, but have found that the sheeting is also damaged. Just need it replaced with appropriate gable sheets and make it ready for me to paint, I won’t be putting anything decorative back up. Dimensions are approx. 2420mm across the bottom and 920mm high in the middle. You’ll need to supply all materials.

I need to build concrete base on the side yard. The size is 2.9m *7.3m. The area is easy access to the main road.

I want to build a concrete base for my patio, the size is about 2m x 4m

Cabinet maker quote - 4x Basic wardrobe fit outs with selves and draws. 1 x walk in robe fit out. Some internal Broom cupboards, Would like advice to achieve best outcome also. Photos included are not the actual task. Price subject to onsite quote.

Replacement of outdoor stairs and Landing 7 stairs high.

Small extension of plaster needs joins and edges set. See photos. - Due date: Before Saturday, 20 January 2024

PLEASE COMMENT AND MAKE AN OFFER IF I AM OFF IN BUDGET!! I’m looking for someone with experience installing wire balustrading to Merbau decking posts to complete rear stairs for RTA approval to rent out home. Pics of area attached plus last pic of front deck balustrading. Rough measurements are: Landing inside post to inside post 1. L 1350mm x H 960mm 2. L 990mm x H 960mm Staircase inside post to inside post 1. L 1560 x H 940-1060 2. L 1460 x H 940-1060 Height of stairs to rail varies as per above. I have enough 3.2mm wire to do the job but require supply of other materials. I don't mind what connectors are used, whether they require the crimping tool or not. They don't have to match the front deck balustrading. Preferably before Christmas but not essential!! Thank you! - Due date: Before Monday, 25 December 2023

Looking to get our deck replaced, all current board will be removed prior and materials supplied! The deck is roughly 14m by 3m - Due date: Flexible

Carpenter needed for renovation work - Due date: Needs to be done on Monday, 25 September 2023

Replacement of post (bolted into wooden base) 1150x100x100, joiner piece 890x80x40 and lower railing (some of which is still solid). 2800x70x20. All wood. To be left unpainted. House is approx 100 yrs old. - Due date: Flexible

I am having my timber floorboards sanded and polyurethaned, so I wish to store my furniture in my carport. I have a 5.3m x 5.3m carport with 100mm. thick Cooldeck roof. I have a 12m x 8m tarpaulin, plus some guy ropes (& poles) There are some pegs. I may need to buy some rope. I would like the tarp draped over so it hangs down to the ground and protects my belongings for a month or two. - Due date: Flexible

Build a small deck around pool - Due date: Flexible

Looking for handyman to install garden shed on concrete slab at Geebung - Due date: Before Sunday, 30 July 2023

I will supply you with 2.7m lengths of SPOTTED GUM KD DPR 85X19. I need them cut to 63 pieces of various lengths - between 800mm and 2200mm (I will give you details of each piece) And they will need three 12mm holes drilled in each piece too, countersunk. Again drawings will show where. The cut edges of the timber will also need to have the edges rounded 3mm. And each piece will need a sticker or a tag (eg 'piece 1') so I can identify which piece it is - Due date: Flexible

Fix a T-Top to a Triumph Bubba boat. It’s in position, just needs to be screwed to the centre console and the floor. - Due date: Needs to be done on Saturday, 6 May 2023

Need to install prepare & Keter Plastic shed - Due date: Flexible - Due date: Before Sunday, 21 May 2023

Remove the existing Garden bed and install the shed. Shed comes with the base and no concreting required - Due date: Flexible

The bird shed is from Bunnings. Reviews state it maybe tricky to build, and require holes drilled and rivets used. I have a rivet gun and drill if you don’t. I can’t tell you how long it will take to build, but I suspect a few hours. The time it will take is up to you to work out and quote. Can only be built this Friday 29/3/23 - Due date: Needs to be done on Friday, 31 March 2023

Currently we are doing some renovation at our house at the moment. As a result of this renovation we ad to uninstall some of the cabinets and sections of cabinets to allow a space for our fridge and also open a space for an island bench. I have included some photos of before and after our kitchen to give you an idea of what it looks like and what needs to be done. All required cabinets have been removed carefully and professionally without any damage. The work now includes below specific tasks: 1- installing the two door cabinets which sits above the fridge. 2- as we are using a section of our removed cabinets as the island cabinets we have a full length set of cabinets which require to be installed on the floor where the stone bench top will be sitting on. 3- the cabinet under above for the kitchen island require some alteration such as adding a side panel and re structuring its door through some new rails to make it workable for the island bench cabinets. Therefore, to get the task 2 done this alteration needs t be done first. 4- installing the oven gable and two small drawers upper and lower the oven. The gable and all cabinets of the oven and microwave have already been uninstalled and taken out. For these tasks there are plenty of original panels and cabinets. Please see the photos of prior to removal of cabinets and after. Feel free to ask if you have any questions - Due date: Before Sunday, 19 March 2023