Find experienced local carpenters in Gladesville

Need frame to be popped back into place and superglued. See image. One single piece for fixing - about 2m long.

Need a bathroom cabinet changed. I have the replacement that needs to go in, it will need screws. The replacement has different holes that need to be drilled into the wall and may need a further 2 holes to hold the mirror door, as it is heavy. The wall is made of concrete as it’s in an apartment. There is also a power point in the current cabinet that needs to be considered. The replacement was bought so that the mirror drops down so you can see your face when at the sink.

Skilled wood worker wanted to make 3x simple but attractive stable bases for wooden figures. - Supply wooden bases; - Flatten/level bottom of wooden figures to stand flat on bases; - attach figures to wooden bases

Hello, looking for a carpenter that can build a half wall near our reception area at our gym. Height roughly 130 cm and length around 1.5 metres at most. Also require our laminate bench top cut so that we can slot a fridge flush up against wall.

I need x3 corner shelves installed

Cypress pine floor. It is lighter in colour than floors in adjacent rooms. It would probably need a medium stain to match as near as possible to the other floors.

Hi I require someone to install waterproof wood flooring on the area shown in the photos. 9ms2

cut into sides of cupboard to make fridge fit. The bottom part of this space is slightly more narrow than top (about 0.5cm). The bottoms need to be trimmed to fit the refrigerator.

Decking replacement - Registered tradesperson (license and warranty details must be provided) -Remove and dispose of existing rotting timber decks including all frame timbers and decking boards - Storage seating frame to be removed and installed again - Supply and install new framing bearers and joist timbers in H3 -Supply and install cement footings for supporting post in H4 - Bearers and joist to be protected with tape - Supply and install new 90mm hardwood decking timbers -Decking boards to be fixed using stainless steal decking screws -Treat new timbers with deck wash -Supply and apply x2coats of natural decking oil -New deck to be constructed to original size and design including steps

I need a dartboard cabinet attached to a brick wall outside. The brick will need to be drilled. I also need the dartboard mounted inside the cabinet please.

Put timber flooring on our slab of a deck.

Need five shelves and door built into this nook. Aiming for it to blend in with the white colour walls and laundry doors next to it. Dimensions are: Height 238cm, Depth 60cm, width 50cm (46cm at the base with skirting board) Looking for the most cost effective solution so will consider different options

We need 3x solid wooden floating shelves put up in our lounge room please. Shelves and fittings are provided. Instructions here: https://the-timber-line.helpscoutdocs.com/article/4-floating-shelf-instructions Shelves should go to the right of the TV staggered

I need a deck with stairs leading down, constructed with either Merbau or Jarrah wood. The deck should feature thin or wide planks, approx 16sqm and include approximately 8 stairs 1.2 wide, mounted against a wall. Side of the house going up to the back pool area. will need posts to the floor and very flexible on how we design it as it is side of house

The shed to be built is in a corner. Therefore two brick walls already exist. A frame is needed and one side wall. The front of the shed needs a double doors and a slanting roof. The material is probably colorbond. This can be discussed.

Need - shelf built in storage room onto a double brick wall. Dimensions 2100mm x 600mm

Only someone with good reviews. Is willing to come and quote and measure. Doors will be Corinthian from bunnings. (Will come with you to bunnings to purchase) Quote your labor.

Wood chest of drawers stands 110 high by 110 width i want a limewash stain

I need wooden sleepers cut to size & secured to side of house & cement retaining wall to great a flat surface on the ground so I can put 2 plastic sheds on. Total width is 180cm (9 sleepers at 20cm width). Will also need to support the sleepers as the ground is not level (maybe with pavers or something similar). Please see pic.

Need a wall built 3.2 metre wide 1.7 metres high and with 100m , needs to be sheeeted doesnt not need to be plastered