Find experienced local carpenters in Haberfield

Build a custom display cabinet with sliding glass doors and fixed shelves Material for shelves acrylic Dimensions approx 3m wide x 1.8m high x 150mm deep

I have a salvaged wood trestle dining extension table in a “natural” finish. It’s supposed to look aged and have slight water marks and discoloration over time, however the two end extension pieces were water damaged in a flood and the whole table needs a light sand and re-finish. No major restaining required. Edit - I do not want to completely remove the water marks, just have them blend a bit more (especially the ends that were damaged in the flood). I assume it’s more of a light oil that would be used after sanding, not a stain that will change the color

Build a round timber table top - Due date: Flexible

Build custom shelving in studio along 2 walls.. Needs to hold heavy audio equipment. 7m long x 1.8m high x 0.5m deep.

I'm looking for some quotes on a custom shoe shelf/sitting bench for my hallway, see sketch attached. Fairly simple design, but quite long. 2100mm long 350mm wide One shelf Timber or timber veneer e.g. Tassie Oak At least 18mm thick board, but must be strong enough to hold a person sitting. Skirting board cut out at rear. Delivery to Inner West Sydney. Thanks! - Due date: Flexible

We have a wooden railing next to our front porch stairs and some of the supporting balusters / posts have rot. We need to replace 5-6 of them. Expectation is for the person to supply all materials and equipment including the final paint. - Due date: Flexible

Need shelving built in storage room Room is 3.4m x 1.8m I'm thinking floating melamine or timber shelves, but open to suggestions

Some of the framing wood fell out when eave panels were removed. Need this supplied and installed, as well as the panels. Four sides of the house. - Due date: Flexible

First 5 photos of same window, I have a very small stained glass piece that has broken on my front window. We need it to be replaced to match the one next to it. I don't mind whether this means making it look similar, or removing the piece next to it and replacing both if that option is easier. This is on my front door. The main piece of glass is also cracked on this door and needs replacing. As does the frosted glass window in my bathroom - Due date: Flexible

COST: $500 for labour + will reimburse cost of materials as needed I need a simple hinged timber pet gate with vertical slats, to be built in 940w doorway opening (there is no door on the opening) between dining room and kitchen. GATE to be: 800H x 940W Simple gate latch, no need for childproof openers or locking latches (the labrador does not have opposable thumbs) Needs to be fairly solid construction to keep labrador out of dining room. Painted white to finish. Images below: 1. doorway where gate will be fitted 2. example of type of simple vertical slat gate I would like - Due date: Flexible

Hi. Im after a carpenter to work along side another carpenter with duties including timber framing, internal fix out ( skirting and doors) on going work available!

I am renovating my home and doing up my master bedroom. I was looking at two large pieces of glass 2.7m in height on each side of bed frame. Bed frame will be 2.7 in height it sits just below the ceiling. The bed space will be about 1.85 leaving us with about 63.5 on each for mirrors in width and 2.7 in height. Glass to have gold trims around border and gold lines running through glass in line with bed frame. Please see pictures attached. If you can please let me know if this is something you are able to I would really appreciate it. I am also looking at marble look backdrop for back of tv .

We currently have a sliding solid timber door to our laundry, but we want to convert it to a hinged door (hinge on the right). Job requires: - own carpentry tools - door resizing, it's about 20mm too wide and 100mm too tall, need a circular saw and saw horses to resize it. - install hinges - install new entrance door handle, probably this one https://www.bunnings.com.au/lockwood-31-55mm-satin-chrome-entrance-lever_p0256820 NOT required: - rubbish removal - painting - Due date: Before Friday, 13 May 2022

I'd like quotes to sand and stain 2 x newly built merbau decks - each approx. 20 sqm and each include 2 sets of stairs. One deck also has posts and wire balustrade around it. Please provide separate quote for just sanding, and a quote for sand and stain. See photos - the first 4 are one deck, the 5th photo is the other deck Location is Haberfield Due date: Can be done any time between Wed 10 and Wed 17 Nov - Due date: Before Friday, 12th Nov 2021

I need a timber or frameless bi-fold window installed on a corner section. It will be only the top half (above the front bench) in the photo. I want there to be no post on the corner between the two sides when the window is open. Dimensions of two window panels: 2300W x 1000H 1300W x 1000H Please provide your best quote. Thank you

Hi there There are two jobs 1. I’d like to make a space in the kitchen cabinets for a dishwasher. I’m looking at the pictured drawer space next to the sinks which measure close to 700mm width (bigger than the width of a standard dishwasher). The fee should be inclusive of all carpentry, plumbing etc works. 2. Supply and install new timber support in the attic