Find experienced local carpenters in Hawthorn West

Timber kitchen table water damaged needing sanding & re polishing

Approx 10 wooden planks (screw in) are rotten and need like for like replacing by pool @ back of house

Seeking experienced cabinet maker to fix poor design of existing kitchen cabinets housing two built in refrigerators. Existing refrigerators need to be temporarily removed and an air vent/space installed (with fans?) to rear of cabinet to facilitate air flow and exhaust of hot air at rear of refrigerator into ceiling above. Also, door hinges need replacing as they are sagging and allowing doors to rub together. Price negotiable depending on solution.

Looking for someone to replace the wood veneer on the table and then stain. I have already sanded down the legs and sides. I'll cover the cost of materials (stain, wood veneer etc). The price is just labour. Advice welcome.

Am looking to apply two coats (I have cabots deck and exterior stain ready) to a relatively new blackbutt deck. Will need a little cleaning before applying, but nothing major. I also have the specialised deck brush, deck cleaning product for use.

We're looking for an experienced cabinet maker to build 4 x free standing cabinets & 2 x boxes/stepped risers: 2 x two door lockable white cabinet (Width; 150cm, Depth; 70cm Height Options; 76cm) 2 x two door lockable white cabinet (Width; 120cm, Depth; 70cm Height Options; 90cm) Cabinets should be white, lockable & with one shelf inside. Internal space will be used for storage, with ornaments & jewellery displays on top. White melamine or similar for materials. 1 x white, fully enclosed riser/boxes (1m wide x 15cm deep x 10cm high) 1 x white, fully enclosed riser/boxes (1m wide x 15cm deep x 20cm high) These will be used as steps for the ornament displays. These will need to be completed on or before 24th October & delivered to Hawthorn East. Please include in your quote the soonest you can have these completed - the sooner the better for us. Attached is a render of how these will be used. Our current quote is for $3000 + GST so any quotes that beat that will be considered. Please include photos of your previous work for reference. We'll also need someone with an ABN that an issue an invoice upon completion.

Need someone to fix sliding door. One side seems almost completely jammed and is a struggle to open the other opens but I would like it smoother. The doors are wooden and have a pane of glass in the middle, are doors that lead from living room to outdoors.

I need a cabinet installed on top of fridge sturdy enough to hold heavy book/liquor. Need it to be the same finish as the other laminate cabinets

I need three cuts made into some plywood I have. Straightforward, but needs to be precise. Needs also to minimize the chance of tear out, it's a nice birch plywood with laminate.

We have a built in Entertainment cabinet which needs removing the cabinet is high quality and very solid. Electrics have been removed and secured. The cabinet would have some value and the job would include disposal/removal if possible.

Joinery built to match specifications 3 sets of wooden laminate shelves 2 sets of cupboards Refer to photo

Small pan fire got out of control and stained the dusty ceiling. I've done some of the walls but have found doing the roof as hard and dangerous and I wanted to know a quote before buying hundreds of dollars worth of equipment that I don't have (I'm an early 20s renter).

I would need a plywood board to be delivered at my place. You will need to cut it to the following dimensions: 2045*335*12mm If easier you can cut the plywood board in my backyard.

We've had our power upgraded to 3 phase and our previous meter box was too small for the new meter panel. I'd like a simple box constructed that is attached to the wall, with a door. Please supply the materials. I am happy to paint it myself. The size of the box will be approximately W 42cm, H 45cm, D 24cm. The earth cable is also not secured to the wall, so would appreciate if this can be tidied up somehow.

Install internal Bunnings Prempanel Timber Slat Panels and wall hang 14 x 60cm cabinets in apartment. Timber panels would need to be picked up from Bunnings by you so probably need a van, tray or racks (purchased by me) and they are 2.7m long x 0.6m wide each. I will build IKEA cabinets, just need someone to install them properly. Not sure if best to install timber panels around cabinets or install cabinets over top of panels (to be discussed). Attention to detail is really important for this project. The apartment has limited space so maybe some initial cutting needs to be done off-site. Wall is about 2.4m high by 4.8m wide. The building has an elevator and panels will fit if cut down to 2.4m.

We have 2 shower boxes. We also need a quote for water stains on the balcony glass door. Comment if you can help with cleaning walls and windows as well and mention a quote in the comments. There are dirt stains on the walls.

I have had this table since 1972 and I would like to have it sanded back to the raw timber I’m unsure of the cost, so i’ll put $10 to be negoiated.

Need a carpenter to finish off outdoor small set of stairs for our job: - add hand rail on top of posts - add in set of 3 wires at equal distances in 3 sections (so 9 runs in total). All materials supplied

Provide and lay timber flooring in roof space. Roughly 5mx4m Easy access See photos.

Need carcass framed out under custom concrete bench and doors framed for inbuilt bbq (for our clients). Also attaching timber radials to door frames. All materials will be provided / at site for you.