Find experienced local carpenters in Heidelberg West

Single level small house Half of old-kitchen removed. Kitchen to be in stalled, all on site. Happy to support the project to completion. Adrian.

We have an existing raised garden bed and looking for somebody handy to build a greenhouse over it like the image pictured. Can supply materials.

We want someone to cut the frame and plaster of our wardrobe and increase the height of the wardrobe andplaster it.

Design and build a L shape bench with storage for a small dining room. Please include as much information as possible as to what's included. The photo is an example of what I'd like it to look like.

Please give me a quote to sand and stain my merbau deck.

Need bench top asap size 1870x830 And one side 930x830 Roughly colour match but not too picky as long as it’s close need asap

Hello Cabinet-makers & Tradespeople, What would you charge me to frame-box up two built in wardrobe? Please provide your quotes. Dimension for both bedrooms are same: 2600 & 2600 x 600 2 x Wardrobes Empty room: photo: to be fitted behind door and running to window. Room with existing cabinet is within a nook, as is… Mirrored doors supplied, onsite with tracks & cleats. (Ignore my $10 budget.) Adrian.

Needing built: two BIR wardrobes Bedroom 1: 2600mm x 2600mm Bedroom 2: 2600mm x 2600mm Your quotes please (ignore budget) Heidelberg West 3081 (Northland SC) Thank you. Adrian.

Needing a carpenter to create an opening in our kitchen for a new dishwasher install

Hello Cabinet-makers & Tradespeople, What would you charge me to frame-box up two built in wardrobe? Please provide your quotes. Dimension for both bedrooms are same: 2600 & 2600 x 600 2 x Wardrobes Empty room: photo: to be fitted behind door and running to window. Room with existing cabinet is within a nook, as is… Ignore my $10 budget. Adrian.

I need someone to visit and install 2 sheds. https://www.stratco.com.au/au/sheds--garages/garden-sheds/handi-mate-garden-sheds/handi-mate-locker/handi-mate-locker-2.91x0.85-merino-shmlsddhmlme/

Inspect ground for installing deck. - Due date: Before Sunday, 7 January 2024

I have two bentwood stools that are too tall for my bar height table. Need them sawn down by ~200mm, planed, sealed and returned so they match. Job would suit a furniture maker or carpenter. - Due date: Before Sunday, 10 December 2023

Need Sliding doors & installation: Room 1: Build-in & Fit a sliding door 2.4m wide, 2.7m high. Room 2: Build-in & Fit a sliding doors, with same dimensions as above, (internal shelving not required). - ignore budget of $10 - please quote works - Stand alone, single storey home Due date: Flexible

There are 2 task that I need the help of a handyman. Please, only put an offer if you know how to do these: 1 - Adjust 2 internal hollow doors. They open and close fine, but slightly scrape on the jambs when closing. I can see a slight gap on the hinges' side of the doors, so it seems the hinges' pins might need a minor adjustment.(don't have a photo for that, but the indoor doors are modern hollow, nothing complicated. 2 - Outside, there is a gap on the bottom of a wall that needs to covered by 3 wood bits replaced - I don't have the exact measurements, but approximately 180cm, at the most 2m to be on the safe side. See photo attached for your reference, as you can see, the gap has been temporarily covered with some planks held down by bricks, however I need something similar to what's on the bottom left side of the wall. Not too fussed about the type of wood used, as long as it's secured in a similar way to the other wall. The walls are made of concrete, so you might need masonry nails to secure the wood. There's also one wood bit lose in another spot, that needs to be resecured (nailed back in). I definitely need this done tomorrow (Saturday) from 3pm or Sunday from round 2pm. Unfortunately it cannot be done earlier. Depending on how this goes, I might have a few other maintenance tasks going forward. Thanks, DJ - Due date: Before Sunday, 18 June 2023

Address is in West Heidelberg and I'm looking for an installer who can install a trifold door with frame and tracks allong the bottom and top of an external cavity for an external trifold door that has a frame. Space for install is 260cm wide by 225cm tall. This is for labour only and installer must have their equipment to complete the job. Ideally a two person job. Will likely require foam filler to fix the frame to the walls of the cavity.

Address is west Heidelberg and I'm looking for an installer who can install a trifold door with frame and tracks allong the bottom for an external trifold doors that will be delivered from a showroom. Space for install is 260cm wide by 225cm tall. This is for labour only and installer must have their equipment to complete the job

Install a 2 metre long awning on a wooden board outdoor. Weight of awning is approximately 7.5 kg. Height from ground is approximately 2.5 metres. I will have the awning assembled. Just need to be attached to the wooden board. Happy to help (hold one end, also have a ladder) - Due date: Before Thursday, 19 January 2023

READY TO START IMMEDIATELY. PLEASE QUOTE PRICE PER M2. WILL SETTLE THE REST BY CASH. Please ignore the budget amount as unsure what’s the going rates. Looking for someone to remove existing decking boards, extend the joist/bearer, and re-install new, 140mm composite decking boards. Size of alfresco is approx 6m x 2.5m. Deck is 6 years old so the joist and bearer should be in good condition. To extend the deck to approx 10m x 2.8m. You supply labour and materials. I’ll take care of disposal of old decking boards. Bear in mind that we are not demolishing the deck, we are only extending and re-decking. - Due date: Before Monday, 31 October 2022

Hi there, Am seeking a handyman or someone who’s worked with floorboards before. We have a stain on our floorboards no bigger than 30cm by 30cm, pot plant water stain . Looking for a quote and also someone who’s confident in what they’re doing to fix 200 is not the finals price. Final price for fixing it will be arranged From research it appears to only need sanding and staining/polishing - Due date: Flexible