Find experienced local carpenters in Hobart

New 3x3 meter shed in flat pack needs to be put together. New concrete slab is ready to go. Need own tools.

Hello, I need help putting together this Bunnings shed in about 2-3 weeks time! Thank you! Liv

I need a shelf built around a fridge in kitchen out of MDF or equivalent

Build a conservatory onto existing extension. Deck outside extension. Budget $20000

The Blackboards are light weight. They are basically framed white boards but with a Black Gloss coating on them Install Date: 21 / 22nd Nov Location : Arc'teryx Store Hobart Cat & Fiddle Arcade, Shop 8 & 9, Hobart TAS 7000 Details Remove existing battens. (Screwed on) Add French Cleats)(supplied) to wall and hang 2 x black boards The boards are 20mm thick with the Cleats mounts behind, boards will mount and meet in the corner Sizing is as follows; LHS WALL - 623 mm wide x 3000 mm high (from top of skirting) RHS WALL - 1110 mm wide x 3000 mm high (from top of skirting) Items to mount Magnetic Porcelain Blackboard 1240 x 570mm _ left Magnetic Porcelain Blackboard 1240 x 995mm _ right Please let me know if you are interested.

I am putting together a kit shed and require physical help to lift panels and attach them together. initial time $200 but maybe more to come - can suit 4-7pm weekdays or this weekend

I have 9 1400 shelves that need to be installed into a arch, I would like the joins to be as seamless and minimal as possible There is timber ply in the internal part of each arch, I also need some skirting board around the base of the arch cut and installed

Kitchen laminate benchtop has a ring burn mark due to hot plate being put on it

I have a custom made set of drawers made from melamine and plywood that was made by two migrant carpenters. So there's no warranty. The issue is, the front of the top drawer when closed, sticks out to the left and does not align vertically at the front. Also, the front bottom of the second top drawer sticks out, and does not align vertically at the front. I contacted the makers about it, but they haven't replied. I wondered if a local and qualified carpenter may be able to visit and if either or both drawers can be fixed to align better when closed.

We need someone to help with a full kitchen swap in our office. A kitchenette with a sink. The task includes: - Removing the existing kitchenette and taking it to the tip for disposal. - Picking up the new IKEA kitchen components from Sorell and delivering them to Hobart. The boxes can be unpacked and assembled in a shed in Sorell then transported to Hobart to install or if you have your own workshop they can be taken there before installing. - Assembling and installing the IKEA kitchen. This includes cutting materials to size, creating a hole for the sink, Installation of sink & tap, and attaching cabinet knobs. we do have access to a plumber if needed to cap off the sink / tap during install. Experience with kitchen installation and cutting materials is essential. Please bring your own tools. Looking to get this done as soon as possible. Thank you!

4m x 10m, with walkway off that approx 900 x 3m. With roof of laser light. Will be joined to shed. Possibly composite decking

Bench seat for bay window in rental property. Must be freestanding (not fixed to wall) for rental purpose. Bay window is 730 x 1130 x 730. Picture attached for reference.

Side gate locks replaced, fences & deck cleaned with high pressure cleaner then stained and a piece of timber screwed in

I have an Easy Shed garden shed kit needing to be assembled on a rebated concrete slab. 2.4m x 2.4m gabled, hinged door, 2.35m high.

Wooden garden edging required Previous wood has rotted and needs removing and replaced with new. Some parts still in good condition and can be left. Total distance that needs replacing 14.9m. Areas to be replaced have been marked with twine. Tasker will need to: Remove rotten wood Buy necessary wood for job and provide receipt - amount will be reimbursed. Install garden edging to match existing edging and secure in place with stakes. Not all edges included in photos.

3x6 Easy shed install. Will have some walls built. But need someone to finish off.

I would like a get a quote on a small cat run that’s renter friendly built on the side of my unit (sliding door access & steps) to the fence line roughly 2m wide I’d like to use recycled materials if possible (local tip shop) and have space to make multiple height steps Idea attached

Installing an IKEA kitchenette from flatpacked boxes. There is no stove or plumbing or bench top needed. Need someone with experience installing kitchens and able to work from IKEA flatpack. Please contact me with any questions.

Help needed to unpack and stain outdoor furniture. Items: 2 x outdoor furniture settings (1 large table + 8 chairs and 1 small table + 6 chairs). Work required: Unpack furniture from boxes Assemble tables (x2) - minimal construction required Apply 1st coat of teak oil base coat on all items of furniture (brush and oil supplied) Apply 2nd coat of teak protection coat on all items of furniture (brush and oil supplied) Photos: I can send you photos Expected time: 4-5hrs Fee: $250

Rain water entering shed. Would like a quote