Find experienced local carpenters in Mawson Lakes

We need VJ Panelling hung above these windows (see pic). You will need to cut the board around the pipes so that it is soundproof. We have the VJ Panelling you will need to bring your own tools to cut and attach the vj panelling with a nail gun. We have a cutting space. One room is approx. 6m wide and the other 5m wide. These jobs need to be completed by end of weekend.

1) We need VJ Board hung above these windows (see pic) on one side. You will need to cut the board around the pipes so that it is soundproof. We have the VJ Panelling you will need to spring your own tools to cut and attach the vj panelling with a nail gun. This need to be done twice ( as in for this room and the same on the other side.) This room is approx. 6m wide and the other 5m wide. 2) Skirting boards for this ramp that are attached along the ground below the concave panelling. Approx. 5m. We have the skirting - you just need to cut and attach. 3. Frame for the little wall at the front 9sorry slightly obscured by mdf panels) and VJ panelling for this wall. You'll need to put MDF on the bottom and then VJ above. These jobs need to be completed this Saturday.

20 lineal metres of 90 mm cove cornice supplied and installed

Our dog has chewed the carpet on the bottom stair on the staircase in our rental. We are trying to work out the cheapest option and to find out if the one stair can be fixed or the whole staircase needs replacing. Would just like some quotes and needs to be done by a qualified tradesman as I need to send proof to our land agent. $20 for the quote but a new price would be agreed for the actual work.

Need 12mm taken off some skirting boards to match other rooms as new flooring has been installed Must be on a table saw or benchtop planer as sitting directly on floorboards. I am Happy to come to you if your close by. Roughly 15m2 of skirting with the longest length 1.8m

Need a cat enclosure installed. I can provide equipment just not sure as to what I need etc Area is 6 x 5m approx. Will need netting over top and a gate/ netting with zip for access to other parts of yard - Due date: Flexible

Install a Handi-Saver Garden Shed 1500W x 760D in our backyard garden area. Please quote a fixed rate and proof of prior experience with similar installations. Stratco's brochures and installation guides can be found at https://www.stratco.com.au/au/sheds--garages/garden-sheds/handi-mate-garden-sheds/handi-saver/handi-saver-garden-shed-1500w-x-760d-hsgs1500760az/. - Due date: Flexible

hoping to get a fluted shop retail counter made up. i’m not wanting to use any fancy materials like marble as i am on a budget. hoping to get some simple draws done on the back of the counter. i’ve got photos of what i am looking for ☺️ dimensions i want are 160cmx60cmx100cm. - Due date: Before Monday, 29 January 2024

Stained pine tallboy needs to be sanded down ready for painting. It's partially sanded 4 large drawers and 2 small 93cm wide 122cm tall 43cm deep - Due date: Flexible

Replace around 15 kitchen cabinet doors, you need to manufacture and install them. please see the photos below, excluding doors for the kitchen island and pantry. - Due date: Before Friday, 22 September 2023

Frame work is done on bulkheads just need it plastered. Unsure about prices so would like quotes. Ignore budget amount - Due date: Flexible

Hi, I’m wanting a dog crate that doesn’t look like a dog crate! A sliding door would be great, but not absolutely necessary. Bonus drawers storage would be fabulous, but again not absolutely necessary. Please see pictures as a guide. Rough crate size: 80 cm wide, 60 cm deep, 60-80 cm high. - Due date: Flexible

Needing someone to install basic cabinets for an existing island bench. Space is approx 2m long, 1.2 high. Looking at other jobs including moving kitchen sink to same bench (but opposite side) Price negotiable. - Due date: Flexible

I bought patio from startco. I nee someone to install that. I have no idia about cost. Please share your offers - Due date: Flexible

I need a carpenter to fit and design some doors for the back of a campervan. I will pay for all materials the 300 is just for the labour cost to install

Need someone to finish a 4x4 kit shed that is 90%done Some flashing, silicone etc - Due date: Before Monday, 14th Feb 2022

To be built in the backyard. A Stratco gable shed 4.5L x 1.6W x 2.2H m. Steel frames; colourbond steel; single PA door. Shed materials on site. Site ready for construction. One shed wall will be ~10cm from fence. Consumables for post concreting will be needed. Ceiling foil and whirly bird to be installed too. Would likely need at least two people for the job due to supporting the frames. Date to be built: ASAP.

Installation of stratco 2.1x1.8 garden shed

To be built in the backyard. A Stratco heritage gable shed 4.5L x 1.6W x 2.2H m; and an Alpha Industries 2.4L x 2.1W x 2.1H m. Both in colourbond steel. Single door access per shed. Shed materials will be delivered to site. Site will be cleared ready for construction. Tools / post concreting will be needed. Would like ceiling foil install and possibly a lourve window installed too. Date to be built: Fri 22nd Oct 2021.

Build 5x planter boxes (43m total) Mark up attached with dimensions Land is flat and ready to go