Find experienced local carpenters in Miami

Hi. Am looking to get a non structural wall built which measures about 6m long and about 1.5m high. The wall will be covered with timber panels which are 60cm wide and will need to be cut down to size. If you are available right now and are able to do the work, please get back to me. Will also require the old headboard removed and disposed of. If you can do electrical work as well to move two power points then that's a bonus. The items will need to be picked up from Bunnings. See pictures below for reference. The wall is concrete. Am happy to discuss requirements in person and show you the space. Cheers.

Need New runners for 2 drawers. This bin is being completed for my mother in law. I have allowed this amount to assess the scope then go from there. Please see images attached for what type of hardware will work. Thanks

Hi looking for a carpenter who is able to line the top of the timber treads with FC. I have attached a photo below please let me know a price.

looking for a carpenter to install timber lining tomorrow, comment a price, Thankyou

I am wanting to install a dishwasher in my small kitchen but need to remove a cupboard, take out the old benchtop, install a new laminated bench top whilst cutting out the spaces for the new sink and cooktop. A new smaller cupboard will also need to be made up to match the existing white cupboards.

It’s going to sound strange. But we didn’t get 2 side pieces of a bed for my sons new room. We had such a hard time with him laterly and we just so wanna get him a nice bed to have in his room to play. But I wanted to know if 2x pieces of side panels of wood could be made for this bed. The head the end and the base pieces I have. But what would it cost be to make the side panels. Doesn’t have to be a perfect match of wood colour. Doona will cover. I know it’s probably not the most favourite job 😭

Looking to get this custom built shelf as seen in the picture.

Simple custom sized office desk - with computer cord cut outs x 3 along top. White MDF Length - 437cm Depth - 60cm Height - 75cm

We need a timber wall panel feature installed in our study. Wall is about 4500mm long and 2700mm high. We require an outer frame to be built and installed and then 4 smaller internal “picture” frame features installed in the middle.

After a qoute for a table to be build out of wood like the table below on the photo - I will take care of the finish just need the base

We have existing cabinetry that needs to be adjusted to fit a wider dishwasher. Task Includes: - Increasing the width of the dishwasher void by Decreasing the width of the existing corner cabinet - Cut new through hole for existing exposed plumbing (see images) - Use existing Cabinet materials as much as possible where necessary when reducing size - Fit New Kaboodle 200mm Pullout Basket in replace of the existing corner cabinet door - Using existing corner cabinet door (cut to size) to fit new Kaboodle 200mm Pullout Basket Note: - The existing Cabinet has exposed plumbing within but will not be a problem and or get in the way of installing the Kaboodle Pullout Drawer as the drawer is D450mm and the plumbing is D480mm - Increasing the void in the existing dishwasher cavity will obviously reveal a non-tiled section that will be exposed under the cabinetry. This will be covered by the dishwasher so will not be a problem or need any work from the tasker to attend to. Link to: Kaboodle 200mm Pullout Basket https://www.bunnings.com.au/kaboodle-200mm-2-tier-soft-close-pullout-basket_p2667714?store=8172&gad_source=1&gbraid=0AAAAADtbEB9kDfQdFWD4dCWV-mcf5gpC5&gclid=Cj0KCQiAjMKqBhCgARIsAPDgWlxNA19-hz2WsyYLSDym0V1KE-1to2kvd2mrFbiPzH9ZrN1iPYoXOK8aAoUQEALw_wcB&gclsrc=aw.ds - Due date: Before Thursday, 30 November 2023

We have a small timber deck that requires and hatch/trapdoor with hinges cut into the deck so we can access the pool filter underneath. - Due date: Needs to be done on Friday, 10 November 2023

I have 3 famines primed Demi round panels 900 x 1200 that need to be cut to the correct size and one corner correctly cut and joined. The corner needs to be perfect as it’s highly visible. Example of panels: https://www.bunnings.com.au/900-x-1200mm-12mm-lining-panel-white-mdf-primed-demi-round-20mm_p0281895 - Due date: Needs to be done on Friday, 13 October 2023

I have a kitchen cabinet next to the space where the fridge supposed to go. The bench top protrudes and the fridge does not fit, so the edge must be cut and re-repaired with the same timber finish than the the original bench. - Due date: Flexible

Looking for a wooden deck . - Due date: Flexible

I need two doors made with routed edges to match existing. I can’t find doors to match the existing - Due date: Flexible

Enclose a 3x3m deck with timber screen and a timber slag gate. All about 2.1m high ( would like timber slats There’s an example in the photos) timber from the deck to the roof. I have no material - Due date: Before Sunday, 22 January 2023

Need a skilled Carpenter or Cabinet Maker to install existing built Ikea Base Cabinets into a Butler's Pantry including Benchtop. Tasks Required - Build the base frame to install the existing Cabinets onto (Base Frame NOT provided) - Remove roughly 25mm of material on the back of 2x Ikea Cabinets to allow them to fit within the Pantry - Cut and Install Benchtop for Cabinets (Bench Top, Forstner Drill Bit Set & Joiners Provided) - Cut and Install Kick Plate (Kick Plate Provided) Notes - I'll be available to assist on the day - Butlers Pantry is plastered and finished, just needs cabinets to install - Cabinets H800mm - Benchtop, Pine 30mm Thick - Cabinets base structure needs to sit approx H70mm off the ground to bring the total height with Cabinets & Benchtop to H900mm - 4x Cabinets to install Images Attached - Existing Ikea Cabinets pictured - Butlers Pantry Pictured - Accurate CAD model pictured of Base Cabinet Layout - Due date: Before Sunday, 14 August 2022

Carpentry for some trims around balcony sliding door and sheet soffit. About 12m2. One day job. - Due date: Before Wednesday, 20 July 2022

Hi, I have a customer who purchased a bench seat from me and unfortunately the hinges for the lid have been stripped out. I’d like to get someone to repair it for her and add larger hinges. She is located in Newport on the Redcliffe Peninsular. I can send more images of the bench seat if needed, attached are the images from the broken one. Thanks so much!