Find experienced local carpenters in Molendinar

Looking for someone to sand and stain outdoor covered deck

Install a new bench top in the laundry room

I'm seeking a qualified plasterer to fix three holes in my investment property. One of the holes is located at the top of a stairwell, making it difficult to access. Requirements: - Must be a qualified plasterer - Reliable and professional

we have to change a set of 5 stainless rails for 2 stair cases that were installed without curved transitions which is not compliant to Australian standards. the polished stainless appears to be 50mm and the tubes will need to be cut onsite and as cleanly as we can attach 5 curved end points and extend 1 of these to allow the required 300mm rail extension.

Looking at replacing a small kitchenette in a factory, will get the cupboards from Bunnings, would like someone to install and put on a bench top, all materials will Be supplied. Looking at a corner cupboard, with two cupboards either side. Will also look at a couple of wall cupboards too. Laminate Benchtop will need a cutout for sink.

Need a small area under neath staircase filled in. Materials can be provided ie skirt board and plywood. These will need to be cut to size and fit to fill the gaps. We want the under neath space to be sealed and become a storage area.

Cut out Curren 1mx1m Chipboard mezzanine floor and replace with new one - Due date: Flexible

Looking to extend walk in robe. Wall needs to be taken down and moved. Would love built ins installed - Due date: Flexible

Wardrobe direct doors . 4 in total small size Can be installed within an hour - Due date: Flexible

A piece of glass with a minor corner chip on top of desk needs to have corners cut to round corners - Due date: Flexible

I have a shed kit which has been delivered to Molendinar and customer is worried about theft. I would like the sheeting pack, timber box and 1 x roller door relocated to backyard. The large pack can remain where is.

Need about 4 timber slays fixed under couch I will buy wood but been to Bunnings and wondering if I should buy thicker wood? - Due date: Flexible

Erect absco shed and attach to concrete slab 2.26mx2.26m Want done asap - Due date: Needs to be done on Monday, 27 February 2023

Erect/Install a Garden Shed on an already exisiting concrete slab. Size details provided on the image. - Due date: Needs to be done on Sunday, 29 January 2023

I need the fabrication of the attached stand. A 280 kg piece of equipment will sit on top of the stand, so it needs to be sturdy with at least 3mm wall thickness. - Due date: Before Friday, 20 January 2023

Erect cubby No need to install into ground we are doing that Fully shaded area to work in out of the sun https://www.bunnings.com.au/swing-slide-climb-3700-x-2530-x-1620mm-outback-cubby-house_p3321586 - Due date: Before Wednesday, 11 January 2023

The whole for the installation measures as follows: width: 94 cm Height: 212 cm Depth: 89 mm I still don't have the door or the frame so I am flexible if you would to recommend something on budget. - Due date: Before Friday, 13 January 2023

I need to attach this frame (seen in photos) to my new poured slab. The legs need to be attached and then secured to the concrete. I have the dyna bolts to attach to the slab. - Due date: Flexible

I like someone to make some slats to add to my pergola. I will provide timber, so only labour costs. See attached pics what I needed done. I have two of thank you - Due date: Flexible

I have a Landera Wooden Shed with rebate floor. This is what the manufacturer says......Installation of the Cedar garden shed products is a relatively simple process. The first step is to choose a nice level site in your yard. The floor is constructed either using a recommended Stilla rebated floor or HD floor kit. You can also lay a concrete slab, but our flooring kit is a more cost effective and easier option, its also easier to bolt the shed to our floor than it is to dynabolt to concrete. The HD floor has been specifically designed to reduce site works where the ground is not level. Once the floor is in position the next step is to erect the pre-made walls. Starting at the front corner, the panels are joined and gables fastened into position. The roof is then assembled on the ground, lifted into position and fastened to the walls. Next the hinges are attached to the doors, the doors fastened to the wall and the door handle installed. Finally, the corner posts, cover strips, fascias and the ridge capping are attached to complete the product. As a review people bought them and put it together themselves, usually husband and wife team. So pretty much any handyman can do it but you must know how to use tools and read instructions. I will be there to help. If you cannot do it at the nominated price I offered please do not make offer. There's a picture of the finished product. Thank you - Due date: Flexible