Find experienced local carpenters in Newport Beach

Experienced cabinet maker to cut spare melamine desk top to fill 3 gaps in new desk configuration. Will allso require fitting to walls with angle brackets (supplied) to ensure square, stable and perfect fit. Will need track saw and melamine blade.

Have a range of small requirements for a carpenter. I need new skirting boards in three rooms Repairs to a fence where bamboo has broken through two slats. potential replacement of three fence posts that have rotted through at the base due to lack of sunlight Primarily to fix the skirting boards (had wardrobes put it)

I’m looking for a builder to build a custom a microwave box in our kitchen cabinets and a shelf beneath it.

I need to install 5 new timber doors and handles in an aluminium door frame with hinges (hinges are welded to the jamb). Doors will need to be trimmed slightly bottom and top to fit. And approximately 50 l/m of skirting boards. It is labour only, material will be supplied. Of course you need the tools :) - Due date: Flexible

some timber cladding on side of house some timber decking and tiber post replacement on side of outside timber steps - Due date: Flexible

I need a new kitchen pull out bin installed into a kitchen cabinet. Screwing in will be needed. - Due date: Flexible

Needing someone to source and install additional cabinets in my apartment Second photo is my kitchen, the bench with stools. The other photo is what I am after, installing cupboards under bench - Due date: Flexible - Due date: Flexible

I have a new fridge coming and unfortunately it is a couple of centimetres too tall for the current space so I need to reduce the size of the cabinet over the top of it.... Or replace it with a smaller cabinet. I am flexible with timing but the sooner the better.

Carpenter or very experienced handyman. Can be undertaken most days 1.These two internal sliding doors aren’t moving smoothly. One only needs slight adjustment, the other needs to be lifted and slid into place so needs more agjystment. We need them to run smoothly as they once did. These doors are recessed into the wall and have runners. 2. Our free range bunnies have nibbled the bottom of these same doors. File the bottom and putty into nice square edge ready for repainting (we will do the painting). The nibbled section is about 20 cm high and only a couple of cms wide

Art project- Handyman or carpenter to help with simple design. Need a 1.2m diameter circular plywood piece cut out to sit on top of and extend an existing turntable - must also have an adjoining ramp (suitable for a wheelchair). The total turntable height will be 66mm, so the ramp needs to reach this smoothly. Castors may be required to steady the turntable overhang. Materials supplied and studio space in Newport to work out of.

Stairs to be installed. meed qualified carpenter

Enclose and build two cabinets with shelving in one to create more storage in kitchen. I have attached photos of the areas that I would like done. Location is in Newport - dates can be flexible.