Find experienced local carpenters in Newport VIC

Task includes measuring, sourcing material and installation.

Refer attached Before and After sketch. Demolition- Remove wrought iron post, temporary prop canopy. New works- -Install 125x125 post to support porch (no painting required) -Install new soffit lining to half of porch canopy (I will remove existing) -New decking over existing slab and step as shown in photo, using ModWood or similar composite material

Dog chewed skirting edge ( 2 separate ) - Door Frame edge - Stair skirt

Need a vanity desk to be built

1. Build a wood frame W-900 x H-2.7m 2. Attach wood slats within the frame (Approx 20 slats) pending on final width of wood. Treated Pine Decking. 3. Affix the screen on one side to the brick wall with dyna bolts and the top of the screen to the pergola All materials will be ready on site for the project. Decking wood and fixtures as required. You do not need to stain or paint the wood (Install Screen Only)

Dismantle and transport a cubby house from Collingwood Rd in Newport and re build in Alma Terrace Newport. Preferably carpenter.

We’ve bought some second hand bookshelves that are too tall for our space. We need someone to do a straight cut of the bottom of the bookshelves (4cm needs to come off each - there’s 2 bookshelf units to be done). And then we also need help to lift the bookshelves onto the base cabinets as they are heavy. Thank you!

Small bike shed needs to be built. Just a bunnings shed.

Garden shed Wood with colour bond roof 250 cm tall 250cm deep and 350 cm wide Will need sanding

BUILD A TIMBER SCREEN FOR PERGOLA. Please see below scope of works and attached images for further info. Note the image example is not to scale in terms of the amount of wood slats. MATERIALS: All materials will be ready on site for install. (May require guidance on specific nails, dyna bolts etc.) Timber posts and slats will need to be slightly cut to length. EQUIPMENT: Must have your own equipment. Saw, drill etc Garage and outdoor area is accessible for materials and cutting etc STEP 1. Build a timber (treated pine) frame as per diagram/instructions attached. (Timber Posts Size 75x50) Length to be cut to size. STEP 2. Attach timber slats to frame vertically to create a screen. Total amount of timber slats is approx only, pending on final width of timber and how big the gaps will be between each slat. (Maybe Up to 20 slats) Length of wood to be trimmed to size approx 3m. STEP 3. Attach completed frame with slats to pergola. Right side mount to wood post. Left side dyna bolt to brick wall.

Need a professional (no weekend warriors) tradesman or carpenter to install an antique cabinet. We can’t damage the wall behind or the cabinet, so we require someone who can identify the safest part of the wall to drill into. May require powerful drill and must have variety of screws on hand for different surfaces, as there is a brick wall behind the plaster. Needs to be meticulously installed, as the cabinet is delicate and old.

We are redesigning our laundry have ordered redesign items from bunnings. Need a certified carpenter to help disposing current stand alone laundry sink and installation of plank, sink and cabinets. Electrical and Plumbing work are being taken care of . Have added photos of new design and old sink needing disposal

To clean and stain 2 small decks (1 front verandah and 1 undercover pergola). Approx. size 8x3m and 3x2m.

I would like to assemble a 3m x 2m (bunnings) shed.

Needing a small garden shed built. It's a Stratco Handimate HM7. Slab is measuring 3.06 x 3.20. The base of the shed is measuring 2.86 x 2.25. The Stratco sheds require a rivet gun - I've attached a screenshot of the manual showing measurements and tools required. If you need help lifting the roof panels up for installation I'll be happy to help with this. Thanks.

We are preparing to sell our house and need to clean up and stain / polish our outdoor decks. The front porch, back porch and undercover outdoor area. Flexible on timing but needs to be in July, preferably last 2 weeks. Will pay cash for whatever products are used. Measurements are - Back porch - 4800x1920mm Front porch - L shape, first part 2930x1470mm and second part 4000x1580mm Outdoor deck - 4900x6740

Our front Porch approx 6m x 2m needs a sand and restrain there is also one step that requires a small board repair,

Digging and building sandpit with my husband on our cubby so we can attach a slide.

It's a 3x3 shed, the slab is already there and measuring approx 3.2x3.1 .. Shed is getting delivered sometime this week so just sussing out what it costs to get it built.

Need cabinets made for a nook in my house Loki g for natural timer to be used