Find experienced local carpenters in North Manly

I am looking for assistance to construct a Stratco shed Approx 2.9 x 2.7 I am happy to help to a degree but don’t have the relevant tools etc. you would need to supply tools and have experience building a shed previously. Location - north manly 2100

Skillion roof EasyShed brand metal shed to be erected on existing slab in yard. Shed needs to be anchored to slab. Shed recently delivered with all parts. Rear wall of shed already assembled. Size of shed is 2.25m w, 1.50m d, 2.10m h. Details of specific model at https://easyshed.com.au/products/skillion-roof-garden-shed-2-25m-w-x-1-5m-d-classic

Build and install timber storage and cupboard solution in my carport. Refer drawings attached. Initial thoughts were to use framing timber for the structure, then 12mm particle board and clad in blackbutt timber boards to match entry staircase and other timber decking throughout house.

Existing stone / concrete wall needs to be made higher for pool compliance, roughly 8m long by 25cm high. Existing timber fence needs to be made higher, roughly 2.4m long by 50cm high.

Table legs need shortening by about 10cm

1. Remove existing timber balustrade 2. Replace 4 off existing timber boards with new where posts removed (timber supplied) 3. Construct new shoe rack in void below. Dims. 1430w x 400d x 430h. To be framed and clad in black but timber boards with 2 off hinge doors.

6 large drawers, 2 cupboard doors, 3 small drawers and some cabinetry or kitchen island and fridge and dishwasher housing to be repainted, fronts are constructed if msg

Install cavity slider door latch and architraves on two doors and about 1.2m of skirting. I have the lock. Need architraves skirting and edging supplied please. Door openings are less than 700. Standard 2040 height. See pics. - Due date: Before Sunday, 12 November 2023

Have three (think only) rotting treads on outdoor stairs. Quote for labour plus I’ll reimburse for materials. - Due date: Flexible

1x villaboard wall 2.7w X 3h (with three niches), 1 X villaboard wall 1.2w X 3h, 1x wall and cavity slider 1.5w, 1 X door frame and jam etc. 860w 1 X bulkhead above doors. Supply and install all materials including doors and framing materials and sheeting boards. Framing to be complete with lower sheeting just screwed to enable electrical and plumbing roughing before sheets are screwed and set. Reinforcement for shaving cabinet and wall hung vanity. Due date: Before Saturday, 7 October 2023

Build a fully collapsible yoni steam seat from wood with natural materials. Dimensions: Height: 40mm Length: 40mm Width: 40mm Full brief will be provided. Prefer an experienced woodworker/carpenter to do the job. Price based on quote of materials and labour. Thanks Due date: Before Monday, 10 April 2023

I would like to have some book shelves built up a tall wall .. roughly 1.3 metres x 3.5 /4 metres .. can give exact measurements if you need . I would then paint them myself . Doesn’t need to be expensive wood a conscious of budget. - Due date: Flexible

I need a carpenter to shorten 2 bedroom doors and 4 wardrobe doors, to include sealing the bottoms back up, and having a smooth finish. Doors will need to be taken off and re hung also. We’re having carpet fitted soon and need the doors to be shorter. - Due date: Flexible

Need someone to stain our large wood deck and move the bbq, table, umbrella. Large deck around 30 sq meters. Need the right equipment. I can supply the stain if needed.

Need help, physical labour, to demolish a timber deck without damaging the decking and structural timber.

We currently have Cyprus pine floors that are stained a walnut colour. We have patched a small area where we removed a wall. We want to get this sanded, stained and polished to match the rest of the floors. We have also put in a new staircase with 18 stairs. We want to stain the stair treads (Vic Ash) to match as well. See photos

I need 1 pantry door and about 4 kitchen drawers to be routed out with a router. design is pretty straight forward (to me that is) pictures supplied. Not sure of cost for this type of job. Though I need to place a figure of some sort, please feel fee to tell me it's worth!

Woden gate has fallen down a little and does not fit into electric gate hinge. Do you think you can fix?

Looking to build a flat roof garden shed to mirror our neighbors behind us. Dimensions are approximately 2.7 - 3.0 metres wide by 1.8 meters tall by 1.3 deep.