Find experienced local carpenters in Officer

In need of a shed to be assembled on the side of my house. Abesco ezislider. Specs. Width - 3m Depth - 0.78m Height - 1.95m

Looking for someone with interior design/cabinetry design experience to draft up plans/shop drawings for the construction of a built in corner bench seating with storage underneath. So that I can take it to a cabinet maker or carpenter to make it. If you know someone who can make these things, bonus! The back rest does not necessarily need to be connected to the seat part. Looking at approximately 2400mm L x 1600mm W with a depth of 600mm for the seat. Construction ideally out of wood and would love to hear options for a higher quality wood for the seat itself. Open to cushion on the seat too. Ideally we will find a 1800mm x 900mm table to fit with this built in seating. Floor plan and image of area are attached

All materials provided. Already done: Drawers assembled (one needs to be taken of rails and moved) Shelving cut to size Top boxes assembled Framing done What needs to be done: Cut metal hangers to size Install 3 drawers (already assembled) Install top carcass x 3 (already assembled) Install shelving board x 4 (already cut to size) Install bottom kicker Install top kicker Caulking and general finishings (tidying it up, making sure everything sits nice etc) A lot of the work is already done, just need to finish it off with the above items

Hi, we’re looking for someone to do a raised wooden garden bed for the following dimensions. Length - 350cm Height -40cm Width -30cm Please buy your own material. Thanks, Dinuka

I need someone to build and install a long floating shelf that can hold books and a good amount of weight. I’ve attached a some Inspo photos along with what the current wall looks like right now.

Laundry renovation, remove current sink, build cabinets, install stone benchtop, install top mount sink, install splash back tile. We have cabinet material will just need to be cut and assembled (not a flat pack) We have stone bench top, this will need to be cut to fit the sink. All materials provided Looking at doing something like the attached reference photo.

Install vj panelling on wall with moulding around the edges, we have all the materials, may need to cut vj panels and moulding, so a bit of measuring, maybe some cutting and installation

We have a deck approximately 5.5m x 3.5m. We need to take out the old boards and replace with new boards. We have new 6m boards that are 90mm wide and the screws. We need you to install it.

Looking for someone to build me a makeup vanity 8 drawers includes (need to supply all materials)

Shed installation on pavers, may need timber frame to level up surface.

Vanity needs to be built

The closest hanger ceiling platform loosen it's weight bearing 1×1/4 " glued panel which is under the platform. Hanger rods and brackets are in good condition. Only platform support frames partially detached from platform

I need outdoor decking for my backyard.

Need a shed built. It is an easy shed Flat Model EF-S1515 1.5mx1.5mx1.8m. Tools required are a power drill, Phillips Head Driver, Pop Rivet Gun, Step Ladder, Drill Bits - 3mm steel, string line. It’s unpackaged and ready to go, it just needs to be assembled. Instructions say an experienced diy-er should get it done in 2 hours.

Please see the current shed in the attachment. I want to make it smaller and re-arrange on the same location.

Deck Re-staining I'm looking for someone to re-stain my front and back deck. The job requires maintaining the same colors as currently applied. Please see the photos below for reference. If you're experienced and have the necessary tools, please reach out with your availability and a quote. Thank you!

An experienced carpenter wanted to build a large frame for our spa bath

We need to build garden beds and wooden sleepers with steel posts ( 14 posts). 50mm sleepers 2 sleepers high, 1m wide, and 12+6+6 m garden box measurements with galvanized steel posts. I can supply all the required materials. Please quote with materials and without materials. The price will be adjusted based on the quote. Thank you.

I need someone to build and install a long floating shelf that can hold books and a good amount of weight. I’ve attached a some Inspo photos along with what the current wall looks like right now.

Hi, We need a cabinet maker to build a cabinet in our laundry. Please see the photos and quote. The dryer will be removed.