Find experienced local carpenters in Seaford VIC

2 x ABSCO modular garden sheds 1.52w x 1.81m installed at same address one in each unit. Sheds are off the shelf and have all the pieces cut, just need handyman who can put it together.

I have an Easy Shed Model ETG-D3823 gable style shed which needs assembly and installation please in our backyard. Shed dimensions 3.75m x 2.25m. I have created a timber flooring which is ready to go.

We need some custom selves made and installed in the kitchen to use as pantry shelving (measurements in photos are approximate only) - Due date: Flexible

We have a small shed that requires to be plastered for storage

The unit is 305sqm. I have drawn where I'm wanting the decking and the kitchen will be similar layout. Rough dimensions are; Height: 800mm Width: 2800mm Length: 6320mm

Need someone to supply 2 doors for my shed size per door will be (1765h x 790w)

IVe got cabinets IVe already assembled. What I need You to secure them in the space. Install the Benchtop, sink and faucet. Put legs on the cabinets (as required) Do tiling on the wall (I have the subway tiles) Install threshold metal (to cover tile and floor transition between room) tiles on floor may need to be shaved back.

Looking for someone to assemble a Bunnings shed this weekend. 1.5m X 2m small garden shed (see link below) Shed assembly only. I will level out the ground ahead of time (it's going straight on top of levelled ground for the time being). https://www.bunnings.com.au/absco-sheds-2-26-x-1-44-x-2-0m-monument-regent-single-door-garden-shed_p0374579

After a cabinet maker that can design, supply and install cabinet/ shelves for 3 walk in wardrobes. New Build in seaford. Rough dimensions: 1500x1300 1000x1900 1500x1100

Hi Airtasker community Looking to have our dining table Sanded down to a natural finish and sealed to withstand life’s challenges. It’s a pretty sturdy table with wrought an iron support structure supporting the legs which will also need to be cleaned and restored to remove any rust etc. Measures 110 by 210. I don’t have any tools so will need you to have these to complete the job and the required products.

I am looking for someone to install three sets of basic sliding doors for my bedroom wardrobes. We plan to replace our standard wardrobe doors with sliding ones to save space. These are the sliding doors we will be purchasing: https://www.bowens.com.au/p/hume-smartrobe-door-primecoat-2/?q=ce023028c6e776c1176b4b6cdcac77c1&size=2040x720mm&uom=EA%7C1&door-grips=Pine+Grips Please see the attached pictures of the current doors.

Handyman/ carpenter required to place skirting board in a store room, and partial living room. Install Rangehood cover Install wardrobe shelves and two doors Install 1 bathroom door Patch a hole in the wall and sand. Install a letter box. All material included, however may require small nails here and there, I only need a bit of Muscle. May have few small odd jobs. Please advise your availability and price.

Provide and install timber on pergola to allow safe installation of laserlight. Pergola measures length approx 8m both sides and 4.8m and 2.8m width Shed and furniture in the picture will be removed. Provide details of amount of laserlight required and I will source it and have it delivered.

I need a simple barn door to be constructed to match another door in the room. I already have the hardware. Just the door needs replacing. I would also like if you could hang it on existing hardware. It will Need a groove along the bottom for the track. The pictures I’m including show the purple door which needs to be replaced. I would like the new door to match the stained timber door as shown in the other photo (although the door requiring construction is smaller in size than this one). Measurements in mm are 870w x 2100h x 34

I need our kitchen measured to put in new cabinets and bench tops. I already have a place to buy both, but need the kitchen measured. If you sell cabinets too and can do the same price we already have that's been roughly quoted, we'll happily go with your cabinets instead

Cut down x1 laminate desk bench top, 10cm from each side (reducing to 1600) *the end butts up to a brick wall that needs to be cut *must have suitable saw, happy to cover the cost for a new blade if required *I can provide anything else required *Yes, I’m aware laminate can chip, desks are temporary until we can confirm ideal length and width layout before ordering custom desks.

I am seeking help from a chippy/ cabinet maker to build and fit 3 overhead cabinets, 2 tall cupboards and 2 shelves, in our Toyota Coaster! The roof of the vehicle is curved. Therefore the back of the cupboards and cabinets will need to be as well. Choice of materials used will be 12mm ply & pine. Which will be supplied. The vehicle is currently parked in a driveway. The property has another driveway that can be used as a working space if necessary.

Build my pool it’s new in box please it’s fairly small brought from Bunnings

I'm wanting to order a custom-built "tall boy" chest of drawers, please see my terrible sketch for reference Housing: Width 90cm (tight space so can't be much wider) Depth >40 (flexible with depth) Height >125 (flexible with height) Drawers: 6 in total. 2 half size on top, 4 full size below Each drawer should be ~18-20cm deep. Draw hardware: Full extension telescopic side mounts. Its really important to me that the drawer comes out all the way. I don't want the drawers stopping with cms to spare. Material: Not sure, probably solid wood, flexible on type. Prefer light colours. Not keen on particle board as want this to last for years to come. Haven't really thought about handles yet either, something simple and effective. Please email or text instead of calling. - Due date: Flexible

Needing someone to come and build cot for me as I am unable to build. - Due date: Flexible