Find experienced local carpenters in Swanbourne

I have 3x bedrooms that require skirting board installation and a small upstairs landing area prior to painting commencing next week (floor skirtings only). The rooms are relatively small and just looking at a standard primed boards (see attached pics and floor layout showing 3 bedrooms and landing area). Note no boards have been purchased, hoping that whoever quotes can source, deliver and install inclusive of cost. I had added picture of preferred style boards as reference but can be discussed during visit. Painting not required. Qualified joiner or carpenter preferred but a decent handyman who can demonstrate that they have done skirtings before would also be considered.

I need acoustic wood panels installed in our hallway. They need to be cut to size and then nailed/glued to the wall. There are 8 *2800 x 600mm panels , need to be cut to 2600

The rear side of a kitchen bench is made up of two panels of Laminex material, one of the panels has cracked and needs replacing. Each panel is 1600 x 900 mm.

A 200cm and a 100cm ikea pax wardrobe which need to be fitted. The cornice at the bottom may need to be slightly removed.

We need four melamine shelves for laundry cupboard. Width of cupboard is 400mm and depth is 530mm.

Approx. 15sqm of bamboo flooring in a kitchen area

I need supply and installation of a simple wardrobe shelf and rail as per image for example. The space is approximately 1.5m in length by 50cm deep. I only require one shelf and rail for wardrobe. Ideally wanting completed by Saturday. Available after hours if more suitable for you.

Build a 6 rack skateboard deck holder / rack

Construct a 3m x 3m shed from Easy Shed - Due date: Tue 19th Sept

build a small studio, needs a floor structure (on top of gravel), 3.4 x 2.4 in size, with insulated stratco cooldeck on an overhanging roof. - Due date: Flexible

We’ve had a new oven installed but the wood supports within the existing cabinet need shaving slightly (probably <=1mm) to allow the oven to sit low enough to allow it to slide all the way in so that the fascia is flush with the surrounding cabinetry. The attached photos may help to explain. - Due date: Flexible

Hi we’d like to build a treehouse for our kids in a pine tree in our backyard. We are open to ideas about how this would work. The kids are lBudget is dependant on the scope of the treehouse. Would suit a carpenter/ retired chippie looking for some extra work or similar. en for an elevated platform with sides so they can’t be seen when up there. It’s a super tall tree but we are just thinking about 1.5m off the ground. - Due date: Before Saturday, 17 December 2022

Need experienced carpenter. Internal drawers required within wardrobes. Seeking high quality self closing drawers. - Due date: Flexible

Need removal and disposal of 2 fencing panels that are made of asbestos and hence must have appropriate license to handle and dispose of. Then need 2 panels of hardifence installed to sit flush with current panels and secured in place.

https://easyshed.com.au/collections/garage-sheds/products/garage-shed-x-3m-w-4-5m-d-classic Laying and supply of concrete pad to suit attached shed. Quality Install of new shed.

Need an AirTasker with a circular saw to cut a few bricks and pieces of MDF. The bricks are for our garden bed wall. Need two end blocks cut in half, plus three capping bricks cut on 45 angle to make corners. Also need to shorten four planks of MDF (IKEA furniture). Can be done on Monday or Friday.

Fitted oven and cook top being replaced with freestanding oven so cabinetry needs to be made good around it

old deck needs new boards, may need supports re done. 5m x 5m to have 140 wide merbau or similar boards. around 400 - 600 above ground level.

Assistance to assemble and erect kit shed

My wardrobe has been installed but it is incomplete and possibly incorrect. I require an IKEA installer to finish the job properly and neaten up/paint the skirting board next to the wardrobe.