Find experienced local carpenters in Tempe

I’ve got some ikea cabinets and require cutting of VJ boards and to liquid nail against IKEA cabinet doors. The are a total of 7 ikea doors. Also require cutting to size and mount door for custom cabinet, with VJ board. And lastly cutting of base board to cover underneath cabinets. No painting required I will supply all materials but Airtasker should supply own tools, requires steady hands or the right tooling to make the VJ boards flush. I’ve supplied a photo of our desired finish of the cabinetry. All ikea cabinets already mounted and secure.

Replace wood piece on roof fascia outline. Also add wood batten , the wooden section of the front house to modernize Exterior. The batten is a separate quote?

I have eket cabinet from ikea. I need a joinery to create a timber base and joint all these cabinet so it looks built in

I have a wooden base built that needs the snaptite shed put together and built on top of it. The model is a ABSCO REGENT SHED mode: 23141RK www.abscosheds.com.au Instructions provided and can provide support if needed. Comes unboxed with all parts. Just requires a drill, 3mm drill bit. I can provide ladder, rivet gun and spanner and anything else. Should take around 2.5 hours to put together for someone who knows what they're doing.

We moved into a new house and the over-fridge cabinet clearance is too low for our fridge. Looking to get approx 50mm trimmed off the cabinet and door height and refitted back over the fridge - Due date: Flexible

Our deck took a battering in all the rain, and we need to have it refreshed! Most likely sanded and re-varnished, with a small repair to one board that was scratched by the back door. The built-in bench seat will also need to be sanded and varnished. We do not have the varnish yet but can purchase. - Due date: Before Monday, 17 October 2022

The front side of our porch currently has two windows that we’d like replaced with a woodwork frame, to match the style of the other side of the porch. We’d like the old windows and frames removed (you can leave us with the rubbish, if need be). We then need the frame made and fitted in the space that’s left. We'd like you to purchase the wood, to make sure you get the right thing. The frame doesn’t need to be painted. For the woodwork frame, we want to have five vertical planks of 60mm wide x 20mm depth, with a 85mm gap between (as that will match the other section). There is a smaller upper section of c820mm wide x 440mm high and a lower section of 820mm x 1160mm, with a horizontal bar below each section. The existing upper bar appears sound and can probably be retained. All the measurements are on the photos included and I've tried to mock up views of what we're seeking. If anything isn't clear, happy to discuss, to send more photos, or for you come round for a look. We're near the railway station in Tempe. There's easy parking outside and you can use our drive if you need. We're flexible about timing and the work can be done any day of the week. Thanks for looking. - Due date: Flexible

Wooden door was ripped off in a storm. Requesting the door be fixed to the fence again. Thank you. - Due date: Before Sunday, 21 August 2022

I need a basic wooden slat fence built on top of pre-existing brick I will add a photo in comments of what I’m thinking of doing. Please see photo for reference. In dept of housing so budget is tight. - Due date: Flexible

Approx 2cm on the base of two wooden doors

Looking to get my front deck sanded back and stained/painted. Advice on product would be great. The deck has been constructed using nails and most of the nails are above the surface so nail punching will be required/or change to screws, whatever is easier. The deck is approx 5.3m x 1.5m and two small stairs. - Due date: Flexible

I have new kitchen cabinetry that needs cornicing. There are 6 pieces required for a total length of 7,900mm. The gap is about 145mm.

We have two rooms (spare bed/ office and laundry) requiring custom shelving. We would like two wall-to-wall shelves in the spare bed 3.6m across, about 50cm deep. We would like a bench and one or two shelves in the laundry, which would be approx. 3.2m Would be good if you could help source material which we would pay for and provide some consultation on best fit. - Due date: Flexible

I require a skilled carpenter to build the small shed/studio with glass doors on site in my backyard. The measurements are 150cm (L) x 170 (W) x 2.70 (H) Similar to this picture but smaller The studio is for a very small space. $5000 including materials - Due date: Flexible

Kitchen cabinets and drawer hinges need fixing

1) Bottom of set of French doors shaved so we can have rug underneath. You will need to take doors off hinges, shave bottom of doors and then reattach doors. French doors are 71cm wide and there is 2 doors in total. 2) Covering of timber corner panel so rain does not damage timber panels. Height is 113cm and width is 13cm each side.