Find experienced local carpenters in Thornbury

We brought a semi integrated dishwasher and our kitchen renovation plans have stalled. We need a joiner to add a cover to match the rest of the kitchen joinery.

Looking for a qualified carpenter to help me for the next few months Tools and transport not necessary but are preferred. Would suit a backpacker I do renovations and extensions. Good crew of people to work with and interesting work Let me know your hourly rate

Repurpose existing units timber to install 2 x wall length floating shelves. Phone conversation/on site meeting necessary to discuss.

Looking for someone to pressure wash and clean our decks, then apply a coat or two of stain. There is furniture that will need to be moved - the top deck has a large daybed, so may need to be done in sections. Top deck is approximately 3m x 3m, centre deck is approx 6m x 3m, front porch is approx 2m x 3m. We can provide the stain/oil.

Need to install dishwasher in this cabinetry space. Need to cut back the cabinetry to create the space then install dishwasher. The cabinetry is being replaced so we are happy for someone to create the space required. Note the doors will come off. There is power there too. Will be to the right side of the plumbing.

Hi there. I have a crack in wooden desk that needs to be glued together. The crack is horizontal from the edge of the desk, and is about 30cm long. It’s not particularly expensive timber, and isn’t varnished.

I have timber that I need cut down to 8-10mm thick planks to use on a wooden boat deck. Will probably need a bandsaw or oversize bench saw. Probably about half an hour to do it.

Build NYSJÖN high cabinet 30x190 white AP For bathroom

Hi, Looking for someone to build an external kitchen bench with cupboards underneath with a look similar to the attached image. Flexible with the material of the bench, however looking for the cupboards to be the panel look in the image attached. Supply and install required of material and labor. No services are required to reticulate within the bench itself, the bench will simply be a flat top with one cut out for a drop in BBQ. No sink. The bench will need to be approximately 3500mm long and 700mm deep. Final details are to be confirmed, however if you are able to create the above, comment below and I will be in touch. Budget has indicatively noted - looking for quotes, however final material etc needs to be confirmed before quotes can be provided.

We have bought a new oven that is a stand alone oven with a seperate stove top. We need someone to build and install a bench top insert. Does not need to match the rest, as a new bench top tile is going over the whole thing.

Need my stainless steel bbq polished so it sparkles again.

Top of teak sideboard has marks from drinks and possibly hot plates being placed on it. Needs refinishing - possibly sanding and re-oiling - expert to assess

Long pieces of wood to be cut at 45 degrees at each end

Build a custom made base kitchen cabinet - Due date: Flexible

Need a qualified carpenter to give me a quote to support some beams ready to add structural beams and posts - Due date: Needs to be done on Saturday, 20 January 2024

Kitchen benchtops are sticky in places and need (I think) cleaning right back with meth spirits, then a light sand, fresh stain and a new coat of varnish. Could suit carpenter apprentice. About 4.5 m in total length, 60cm deep. Total area is less due to stove and sink area. Flexible with dates. By 11 Jan is ideal but later no problem. - Due date: Flexible

My wooden fence is tilting due to a vine growing on it. It needs to be fixed back up and could be attached to the adjoining brick fence. It’s a newish fence. Or a post in-front to hold it up. I have included photos from my neighbours side too. - Due date: Needs to be done on Saturday, 23 December 2023

We need a sheet-wood custom made pigeon-hole system with six compartments and lockable doors - Due date: Before Monday, 20 November 2023

I require some 18mm pine to be cut to size to make a small table. 8 x pieces to be cut from a 1200 x 600mm sheet. Pieces are mostly right angles / rectangles but 2 x pieces are oval, so need to be able to cut curves. Pieces are measured out, only cutting require. Need cut as cleanly and accurately as possible 😊 - Due date: Before Friday, 10 November 2023

Use existing kitchen cupboard doors to cut and install new cabinet spaces. We have added a dishwasher and placed it in where some kitchen cupboards were, but there is some empty spaces now. We want to convert the empty spaces to shelves and a smaller cupboard. - Due date: Before Friday, 3 November 2023