Find experienced local carpenters in Wavell Heights

Shed designed by an architect to apply with qld regulations. Shed permits required in QLD: A building permit / building approval A planning approval Any other local, council or third party approvals or permits, depending on the specifics of your property and your local council’s rules.

Looking to bring outdoor table back to life and use on new back deck -needs sanding/stripping back and natural stain. You can see colour through recently revealed extended section.

Need an old timber shed removed from my backyard. Dimensions are roughly 3.7m x 4.6m x 3m high.

Need a pool table installed from scratch. Instructions are as follows: https://mainimage.trsports.com.au/Video/SlateDining/DT07SPBLK-WEBOO-INS-Video.mp4

Hi, I need to get some stairs built and a small landing for my mum's granny flat. Height off the ground is about 700mm and dimensions are on the photo attached (roughly 1.8mx1.8m landing and stairs area). Basic balustrade to be included making sure it meets minimum standards for stairs. No preference for wood type and treated pine or mod wood is ok. Please quote for materials and labour as one fixed price.

I need someone to supply and install a stone laundry bench top, to include cuts outs for sink and tap and polished edges. Approx 2330 x 595 x 20. I have measured and made a template.

Large table to be sanded back and stained

Kaboodle Kitchen install required, 3 x base cabinet, 1 x wall cabinet, cabinet assembly required, sink cut out required. The original kitchen will be removed prior.

Staining of a small door. Same color as the panel on the side.

Extend current deck( 1.5) by a further 1.5 on one side of house. It’s a lowest cottage so likely no stairs etc required on extension. Roof on existing deck is currently bullnose; I would prefer to extend that rather then install skill ion roof under existing roof.

Large dining table that has a parquetry type finish needs to be sanded back including legs and restained

We have had a small section of asbestos removed and now need someone to hang a small piece of villaboard in its place. It's about 3 metres long X 1.2 metres high. We also need the chair rail, skirting, and a small section of architrave nailed back in, and the necessary plaster patching. Job involves buying necessary sheet (assuming 6mm thick to match existing asbestos sheeting?), cutting to size, and hanging with appropriate screws; plus nailing the timber trim back in, and any necessary plastering so that the wall looks nice and finished and basically how it did before. We do not need painting. Photo attached shows where it is going - we have got the panel where the tape is removed first (asbestos). Photos also show the X3 bits of timber trim to go back. - Due date: Before Tuesday, 5 December 2023

Looking to have aluminum vertical slats installed in gap above wall in outdoor area. Also need Rangehood to be boxed in to make weatherproof at the rear. Looking for licenced carpenter/cabinet maker to do this job. Price is for labour, I will pay for the materials required. - Due date: Before Thursday, 30 November 2023

I am looking to get the nails punched in deck sanded and the stained including the stairs on deck . Dimensions 6200mm x 4200mm including stairs - Due date: Flexible

Remove French Doors on lower level of house and replace with A&L aluminium louvers. Will require approx 2x course of bricks under louvers to match existing windows height. Will require carpentry inside house, plaster boarding and skirting etc.. Nil painting required. We will order louvers direct with A&L after your check measure. - Due date: Before Friday, 24 November 2023

Need the decking painted in brown. Fencing gate stained with decking stain. Decking is approx 1.4m wide by 17m long. - Due date: Flexible

Need someone to take apart and then remove our garden shed. The shed is about 2m x 2m and on a concrete slab (which can be left). There is also some small shelving in the shed that it would be great to have taken away as well. - Due date: Before Saturday, 7 October 2023

We are building a wardrobe that needs to sit flush against the wall. Need to remove the skirting board and reapply skirting board to fit the wardrobe - Due date: Flexible

Measure & advise on ikea cabinetry for a small hair salon room. Then install it. We have additional work that we need done too if it’s a good fit.

I have had custom cabinetry produced for linen cupboard, attached desk and separate cupboard laundry. The cabinetry carcasses hve come assembled. The drawers are assembled too. I just require someone to install te cabinetry with screws into place. Install the benchtop and desktop. - Due date: Flexible