Find experienced local carpenters in West Footscray

I have a broken door that needs to be replaced with a new one from Bunnings. The door size of the one thats in there at the moment is 197.5cm tall x 79.5 cm wide. The one Im looking at to purchase is 2040 mm x 820 mm so it will need to be trimmed down to fit. https://www.bunnings.com.au/hume-2040-x-820-x-35mm-internal-door-oak-oakfield-hc2_p1972989 I will supply the door and have it ready here. If you can find a door that is the right size that doesnt need to be cut down Im happy to use that instead

Need 3m MDF cut to size. See below what I need. 84 units - 97mm x 2330mm x 3mm 24 units - 87mm x 500mm x 3mm 16 units - 97mm x 600mm X 3mm Please quote the 3mm sheet in the job.

Small, narrow shed for side of house. I’ve constructed panels but need help putting together

Hi, I need someone to come and install a garden shed onto an existing concrete slab. Shed is an Easyshed 3m x 1.9m size with a skillion roof. I had planned to do it myself but have hurt my back, so my loss is your gain to help me out. Flexible on time, it's ready to go when the right person comes along. One thing that I'll highlight is that two edges of the shed will abut existing fences, but that should be manageable

Small dent or swelling on the wooden timber floor

I would like a wooden stand / for for my Yamaha P125a digital piano keyboard. Measurements ( https://au.yamaha.com/en/products/musical_instruments/pianos/p_series/p-125a/specs.html ) Preferably walnut wood, open for discussion, wood availability. Flexible with date finish time (preferably within 2 weeks) Would like a hinged cover for it to prevent dust build up etc but would like to have the book stand it comes with to fit in within hindering the stand being open

I have 5 old timber posts that I would like cut into approx. 80cm lengths. It will need an electric saw as they’re old hardwoods and too tough for a hand saw

To build a alfresco at the backyard and extend the deck Need design and work complet

I’m looking for a skilled handyman to assist with some repairs at my place: • Repair damaged pine V-panels (not all V panels in the picture are damaged, there is approx 10 panels) the panel height is only 460mm high. • Restore wood tiles that were left exposed after a frame was removed Experience with wood repairs is preferred. If you have the skills and tools for the job, please reach out with your availability and any relevant experience.

Need the edges of the wall around two built in robes replastered / finished. Images attached!

Deck size 3m x 6m. Require full sand back to original timber then 2 x coats of stain. I will provide stain, deck applicator brush and accompanying application bucket. Airtasker to provide sanding machine, brushes for edge work and tape to protect door frames. Preferable days are Friday 25 Oct Tuesday 29 October Friday 8 November Pics attached!

Looking for recommendations for someone to finish off our bench with a wooden chopping block (similar to photo). We need the wooden block made (incl sealing) and installed. Dimensions 4cm thick x 60cm deep x 36cm wide Location is West Footscray

Wanting a chopping block made to extend our stone benchtop (see photo), approx 600x400x40 deep. We are getting the last cabinetry installed on Thurs so it’ll need to be made/cut to size so it can be fitted that day. (Or happy did you to quote for install too)

Two corner shelves that I got from kmart

Build the IKEA Billy bookshelf Remove skirting boards if needed to sit flush against the wall Fasten to wall Dispose of packaging

I have purchased a shed from EasyShed, however, have not been able to assemble it. Upon arrival, I realised I do not have the required tools and probably not the right experience to build it. It has been sitting in the yard ever since and now maybe it's time to get a handy man to come build it for me.

I have a small issue in my car park space. Some oil of my car spilled on the floor and I have to clean as better possible.

Need build 4 x ply wood cube seats (crate size) to match the box at front Also build a ply wood bench seat (same length as brown bench seats in the picture, we will remove these and replace with the one you build)

I have 2x 2.4m x 100mm x 100mm posts that I need cut to 400mm lengths. I’ve been using a circular saw but feels unsafe, I don’t have a drop saw but if you have one that would be heaps easier!

We have demolished a shed at the back of the garden and need a wooden fence installing. 6m width x 2m height Attached to wooden fence panel on left, brick wall on right. Needs to be flush and kitten proof! Would need wooden panels and all equipment providing. Ideally suited to a fencer who has spare panels as it's such a small space. West Footscray.