Find experienced local carpenters in Weston Creek

We need to have one part of the kitchen cabinet (far left in the picture with 3 drawers) removed and then the space prepared for the installation of a dishwasher.

Trying to create a room in my shed so I need a partition done with gyproc and insulation and bits and pieces that may be required.

I am looking for someone to build a garden outdoor room in the backyard and also an adjoining bathroom if possible.

Need someone to clean some decking - just hose down and prepping. Then hammer down a bunch of nails, and apply two coats of decking oil. I can supply all of the gear, cleaning stuff and the cabbots oil.

Recently had windows reduced in size, with new gyprock sheets installed to fill the space. The join seams of the new gyprock sheets need to be plastered and made flush with the existing walls so I can paint and finish the room. Images show all the edges that need plastering.

I have a small (3m x 1.5m) EasyShed which needs installation. The slab is already in place and I have concrete fixings. According to EasyShed it should take about 2-3 hours, and requires: a Power drill a Step Ladder Drill Bits: 3mm Steel, 10mm Steel (Concrete Fixings) and 10mm Masonry (Concrete Fixings) Pop Rivet Gun Measuring Tape

Assemble my Easyshed Garden Shed that has been delivered as a flat pack with full instructions. I also have concrete anchor set to fix it to my concrete slab.

Hi there, Looking for experienced carpenter to replace couple of studs, pre sheeting, and recess in bathroom Renos project ASAP. Hourly rate.

Need a carpenter to install a couple of bifold doors Each bifold has two leafs of 395 x2015 each. So around 1590 in total width for all Cavity size is 1630x2040

Description We have built in wardrobes that are already assembled and need to be installed into a bedroom. These wardrobes are heavy and require two strong people to lift them. The war drobes come with track, doors and fittings. We have measured the war drobes and they fit. Scope - prepare room including demolition - install and build in the war drobes into cavity - removal of waste - acquire and provide materials to build in war drobes as required Painting and plastering not required. Any questions let me know

We are seeking a skilled professional who has experience with wood burner/chimney removal, wall/door installation and flooring, for a small home project that includes: 1. Removing a wood burner situated in the corner of what was previously a small room, alongwith its chimney. 2. Restoring the wall and door that were removed to install the burner, including fixing and blending of the new wall sections with existing ones. 3. Repairing and blending the flooring where the burner was situated. The professional will need to supply all the necessary materials for the project. Please include in your offers/qoute, your preffered time/availability to schedule a visit and any other details you may require. Thanks

I have a variety of small jobs would love a qualified carpenter to give an hourly rate to complete some jobs

Hoping to get a quote for someone to pull up the top level brown deck wooden planks and replace it with brown eco deck planks from bunnings. Eco planks still to be purchased from bunnings. Will need to be screwed in preferably. Eco deck planks can be supplied. Deck area is about 42 square meters

Assemble an EasyShed 2.25m x 1.5m Gable Slider Garden Shed and secure to ground - no flooring. See picture for area of installation.

Besta unit doors to be put on. 4 doors in total. 2 doors on smaller unit and 2 on the larger unit. *The mini bar section has no door.

Need a carpenter to change the doors swing from outward to inward. There is a groove to install the door on both sides.

Need someone to replace the middle cabinet to match the white ones

I have a window and that needs seeling with a panel and the flashing installed on the shed

Prop up old beam with acro props. Fix new 190x45x5400 to face to add support. Will pay fee plus materials based on invoice from Bunnings etc.

my current cooktop benchtop cutout size 835mmX480MM I need to cut 890X490mm Can you please assist?