Find experienced local carpenters in Williamstown VIC

Require somone to Dismantle a garden shed 2meter x 2.8 meter in Williamstown and reinstall it in Geelong area. Must know what your doing i require a professional. It’s all screws. No concrete required.

I have a new Easy Shed garden shed that needs to be assembled onto a concrete slab.

Require deck, day bed, table and bench seat to be sanded back and oiled. Preferably completed this weekend. Approx measurements in metres Deck 6x3 Table 2x1 and legs Pergola 3x1 Bench seat 2x1

I'm look for someone to erect a steel shed. I have purchased a kit from Shed Bonanza, measuring 6m x6m in plan and 3m high. All materials are supplied including steel frame, roller door, window, door and all fixings. The slab has been constructed and is ready for the shed. You must be experienced with shed construction.

We have three doors that need 90mm square edge pine moulding architrave installed, We also need 187mm square edged pine moulding skirting installed, We have the material. It would be less than a days work.

We require an experienced cabinet maker to help; 1. assemble and install 5 internal drawers in each pantry, there are 5 units in total. 2. Replace 3 island end side panels 3. install 5 bins in each unit. Must have White Card Drawings attached below for reference. Though price says $5, we are willing to pay $300

Remove an L shaped kitchen from an existing property and reinstall in an old house. Kitchen includes caesarstone bench, overhead cupboards(with rangehood), dishwasher, oven and induction cooktop. Apparently the bench top was installed with the intention of reselling/moving it later… 2300mm long on one edge of the ‘L’, 1950mm long on the other. Looking to ideally have it all installed/up and running (dishwasher/rangehood all installed and working) but if not realistic please let me know. Location of old kitchen is in Melbourne, exact suburb tbc. Please submit price without travel allowance and we can add that on after. Thank you

The rotted weatherboard is to be replaced before painting. The length of the two adjoining boards is 3.8m Price excludes materials, as unsure of cost. Will pay for that on the spot.

Need a handyman for a few tasks around the house - will post the tasks required in pictures - ideally suits a carpenter looking for a cashie- price is hourly rate or flat rate

1 Tallboy and two bedside tables to be sanded and restored in a lighter colour. Can be removed by you and done off sight. New handles to be fitted also. Supplied by me.

Need Carpenter to cut half this table

I'm after a cabinet maker to build maybe 2 shelves at my shop in Williamstown. I will attach some photos for reference

Need custo. Sheving and drawers in wardrobe

Assemble an easy shed on a concrete slab (4.5m x 3mt)

** handyman/carpenter wanted please** We are missing a weatherboard and plinth board from the bottom of the side of our house. We need these purchased and added back on. Length is 14.5 metres. Photo attached for reference.

Old deck needs replacing, boards have been purchased. Verandah post need concreting into ground and some rot on bottom. Verandah post flashing required. Support under boards looks ok may require some reinforcing at one end - Due date: Flexible

‘Putting skirting boards on’ Approx 20m of 190mm (h) skirts to be applied around a lounge room and entryway. Combination of straight and corners to be done. - Skirts, bullet head nails and caulking provided. Profile of skirt included in photos.

Existing cafe need some kitchen Renovation - Due date: Flexible

Looking for an apprentice carpenter to help install decking at my place

Would like to add the cheapest board to divide the cupboard up. Need the divider on both level. Need material and labour. - Due date: Before Friday, 26 January 2024