Find experienced local carpenters in Willoughby NSW

I need someone to cut and fit two new drawer organisers (same brand as the preinstalled one shown in the picture) to match the size of my drawer. The larger one in the picture should be cut to match the smaller one. • The task involves cutting the organisers to size and smoothing the edges to remove any sharpness. • All tools and equipment must be provided by you. • The job is for two drawer organisers. Let me know your availability and cost.

Remove existing bookshelf and add custom shelving including room for a tv at the base of the bookshelf

Needing builder to help with kitchen renovation: Flatpack cabinets from Cabtek made to measure to fit the space. Need help for rip out of current kitchen, waste disposal, new cabinet and benchtop installation, bulkheads, etc. Plans attached.

Window in very poor condition. Need carpenter .

I would like to replace this entrance with 4 panel bi fold doors. Please provide an estimate for install (excluding door cost),all internal architraves and frames. Brick wall to wall is approx 3 metres and door height 2.1 metres. I have added a photo of what I would like to place there. Fee is for an on-site measure.

I need a basic replacement casement timber window constructed to fit within this frame. You’ll need to measure, but around 40cm x 40cm. Top hinges and opens outwards. No need for paint, but prefer hard wood

small table and 3 chairs garden iron set needs sanding and recoating.

3 fascia boards. Cut and ready on site. Need to be batten screwed onto frame around the carport.

Need a experienced plasterer doing the gyprock job which areas including: 1, 2 pieces of the skylights with sizes in 1150*1150 mm for each 2, the bulkhead over the kitchen wall cabinet (about 700*6800mm 3,Please doing the job according to the standard plastering process including framing, sheeting,, install,plastering and sanding. The finished job areas are ready for paint. 4, the job fee should include the labour and necessary materials

New Kitchen cabinets need installation ( please see kitchen plan) 1, lower cabinets with leg on need install kick boards/panels etc. They may need adjusting levels. please see photos 2, need installation for all wall cabinets (70cm high and 35 cm deept)on the brick wall. 3, All the cabinets are assembled already 4, the job needs to be done by the next Wednesday 20th March.

Are you an experienced gyprock worker/plasterer looking for your next project? A commercial office premises in Willoughby, NSW needs your skills! Summary of work The job includes inserting a new lockable door and doorway into a gyprock wall, infilling a brick archway with gyprock to make it flush with the wall on both sides, and building a half-height gyprock partition wall secured to existing walls. See the full details below. Price is to be inclusive of all labour, materials and GST. Details The details are as follows: 1. Insert doorway jam and 720mm door with key lockable doorknob (including 2 keys) into existing gyprock wall and make good; 2. Infill brick archway with gyprock 2400mm wide x 2400mm high and make flush with wall on both sides, and make good with matching metal skirting (profile 150mm high x 28mm wide) including 1x vertical timber post 90mm x 90mm x 2400mm high secured top and bottom to support fixture to be mounted to wall; and 3. Build half-height gyprock partition wall 3600mm long x 2100mm high, secured to existing wall at one end and secured at other end by 2 braces at 2100mm high to other existing walls - 1 brace is 800mm long and the other brace is 1700mm long. A curtain rod is to be fixed below the 800mm long brace. It requires 150mm high skirting but can be masonite or MDF, as it does not need to be the same style or profile as the other existing skirting, just the same height. 4. Install a curtain rod beneath the 800mm brace. 5. All finishes should be paint ready, but no painting is required. 6. Premises are to be left clean with all rubbish removed. Experienced tradesmen only need apply. - Due date: Needs to be done on Saturday, 20 January 2024

Buy plywood to fix existing wood box - Due date: Flexible

1. One internal sliding door - surrounded by glass, both sides of door - 900 wide with pelmet 1800 wide and 2160 length (see photo attached) and to include door jambs plus 2. skirting board 3250 on one side and 1230 on the other in lobby adjoining this door. 3. Dual sliding doors, both sides of doors, 620 wide with pelmet on one side 2500 wide and 2160 length (see photo attached) and door jams. 4. Internal back door, both sides of door, with glass; door is 810 wide x 2030 length and door jamb 5. Internal linen press both sides of door length 2770 x 3620 width (see photos) - Due date: Before Sunday, 21 January 2024

Install an Easy Shed with the following dimensions 3m x 0.78m Narrow Slider Garden Shed - Due date: Before Friday, 15 December 2023

Hi, I am looking for a bricklayer to build me the structure for my outdoor kitchen. I already have all the appliances : BBQ, fridge, sink, doors and you will need to leave the right cavity to fit them on. I need someone who can source and supply the same sandstone brick used on my outdoor. Electricity and plumbing is needed for both fridge and sink. However happy to organise other trades for that if needed. The offer is only here in order to come onsite and provide quotation. I would love i this could be done before end of year. - Due date: Before Sunday, 24 December 2023

I need the height of fridge cavity extended by 3.5cm. This will require shortening the overhead cupboard. - Due date: Flexible

Installation of IKEA laundry as per design. 3D design can be provided upon request. Benchtop will require a joiner to connect two pieces of laminate so must be proficient in this. Please provide a quote inclusive of materials required to complete the job. Thanks - Due date: Before Friday, 1 December 2023

I Need to increase the space by at least 5cm on the right to fit a bigger fridge and still have a nice finishing.

Small shed assembly down the side of our house. Will need to provide your own tools. Please see photos attached - Due date: Flexible

There are multiple tasks which ultimately requires an electrician, plumber and general handyman work. - Remove old shed. - Move chlorinator interface unit behind pool filter and lower the height of the stand. - straighten pump unit slightly (which requires a bit of changing the angles of pvc pipes) - Move electrical power board unit behind pump and lower height. - Instal new pool shed. Optional: if can supply new pool shed that’s also available. I can provide dimensions. Photos attached. Happy to answer questions and provide further information. - Due date: Flexible